Construction of Shelter for Urban homeless at Mandi Tehsil Sadar Distt. Mandi H.P

Amount

Cutting in earth work in all kinds of soil such as pick work, jumper work, pick jumper work, pick jumper blasting work, jumper blasting work, blasting work (soft and hard rock) conglomerate rock including/ chiseling wedging out of rocks (where blasting is prohibited), saturated soil and their intermediate classification of soil including ramming and de-watering where required as per the geometrics, grades and levels shown on the drawings, including clearing of jungles uprooting of trees, vegetation, grass wood trees and sapling of all girth upto any heights/depths and removal of rubbish up to any distance outside the periphery of the area including staking the useful material along the road side and disposal of all unserviceable materials through all modes of transportation with in all leads and lifts. Any loss to public or private property during the course of execution shall be the responsibility of the contractor, which shall have to be duly compensated by him at his own cost in all cases to the extent of the damages occurred as directed or as per the direction of Engineer-in-charge. The rate including Royality, Malkhana, Octroi, toll tax, sales tax or any other taxes imposed by the Government.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering and lift up to any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) layers when required into plinth sides of foundations consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying 1:4:8 (One cement : four sand : eight graded stone aggregate 25mm (twenty five millimetre nominal size) and curing complete excluding form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (forty millimetre nominal size) and curing complete excluding form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 40mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Random rubble masonry (un-coursed/ brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level including racking out joints in cement mortar 1: 6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Construction of dry rubble masonry in breast wall and retaining walls revetment walls and parapets etc. including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals in:-

Foundation, footings bases of columns etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto any thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses , plinth and string courses and the like.

Beams, cantilevers, girders and lintels, sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor.

Stair cases with slopping or stepped soffits excluding landings.

Edges of slabs and breaks in floors and walls in any width.

Providing and laying reinforced cement concrete design mix M-25 (twenty five) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The design mix will be got approved from the Engineer -In - Charge prior to the casting-1 theoritical consumption of cement for the item shall be worked out as per approved design mix as per code including carriage of materials with in all leads, lifts and other incidentals in:-

Foundation, footings bases of columns etc. and mass concrete.

Lintels, beams girders bressumers and cantilevers upto floor all level

Columns, pillars, posts and struts square rectangular polygonal in plain upto floor all level.

Second class brick work using common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Half Brick masonry in second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:4 ( one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position including cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing angle iron door, windows, clerestory window frame manufactured from steel iron section of 40x40x6mm (forty into forty into six millimetre) thickness including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 35mm (thity five millimetre) thick including black enamelled M.S. butt hinges flush door shutters interior grade, commercial type, core of black board construction with frame of first class hard wood and wall matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shrtters as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing MS channel doors, windows frames manufactured from MS section ISMC 75 x40mm (seventy five into forty millimetre) and MS flat 75x5mm (seventy five into five millimetre) including hinges,jambs bead and if required angle threshold M.S. angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 25mm (twenty five millimetre) and provision of locking arrangement and shock observer as specified and applying a coat of approved steel primer after prettreatment of surface as directed by the Engineer-In-charge including carriage of material with all leads and lifts.

Providing and fixing 4mm (four millimetre) thick glass panes with glazing including accessories fixing welding as per specificaton and direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing window shutter having style of z-section on with T-section of 25x25x3mm (twenty five into twenty five into three millimetre) and angle iron 25x15x3mm (twenty five into fifteen into three millimetre) as per drawing complete with fitting and necessary screws and applying a priming coat with red lead paint complete as per approved specification/design direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm ( Zero point fifty six millimetre) for door windows, clerestory windows including bright finished/black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing steel wire gauge shutter in Z- section using galvanised MS wire gauge of IS gauge designations 85G with wire of dia 0.56mm (zero point five six millimetre) for doors, windows and clearstory windows including metal beading of approved quality and shape section with necessary steel screws including applying a priming coat of red lead paint complete as per approved specification / design including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing bright finished brass sliding door bolts with nuts and acrews etc. complete including carriage of materials with in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.

300x15mm (Three hundred into fifteen millimetre)

Providing and fixing bright finished brass Tower bolt required colour or shade with necessary acrews etc. complete including carriage of materials with in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.

250x10mm (two hundred fifty into ten millimetre)

200x10mm (two hundred into ten millimetre)

100x10mm (one hundred into ten millimetre)

Providing and fixing bright finished brass handles with screws etc. including carriage of materials with in all leads, lifts and other incidentals.

125mm (one hundred twenty five millimetre)

100mm (hundred millimetre)

Providing and fixing 100mm (hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mmx10mm (one hundred and ten millimetre) M.S. tower bolts (barrel type) with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing oxidized M.S. handles with necessary screws etc. complete 100mm (one hundred millimetre) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) M.S. Hooks and eyes complete including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, in gratings framed guard bars, ladders, railing, brackets and similar works complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. plain grills of required pattern including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 75mm (Seventy five millimetre) dia pipe on wall face PVC (D Plast) rain water pipes of working pressure not less than 4.5 (Four decimal five) kilogram/Sqm including filling the joints with approved adhesive complete including carriage of materials with in all leads, lifts and other incidentals.

Kota stone slab 25mm (twenty five millimetre) thick in flooring on 20mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including carriage of materials with in all leads, lifts and other incidentals.

Kota stone slab 25 mm (twenty five millimetre) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimetre) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 (fifty) grade including border of kurb block grey of coloured over sub-base of concrete with 25mm (twenty five millimetre) thick average thickness of cement mortar 1:4 (one cement : four sand) lain over and jointed with neat cement slurry mixed with pigment to match the shade of block including curing rubbing & polishing complete (sub base concrete floor to be paid for separately) 80mm (eighty millimetre) thick block including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 10mm (Ten millimetre) anti skid water proof stain and impact resistant heavy duty vitrified tiles Nitro or equivalent 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials with in all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimeter) thick in skirting risers of steps and dado 12mm (Twelve millimeter) thick cement mortar 1:3 (1 cement : 3 sand) and jointed with cement slurry including carriage of materials with in all leads , lifts and other incidentals.

Providing and laying upto floor two level cement concrete 1:2:4 (1 cement : 2 sand :4 graded stone aggregate 20mm (twenty millimetre) nominal size) and curing complete including form work in : Mouldings as in cornices, windowsills etc. Exceeding 15 cm. in girth. including carriage of materials with in all leads , lifts and other incidentals.

6mm (six millimetre) cement plaster to ceiling in cement mortar 1 : 4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool and sand paper complete with readymixed priming paint brushing red lead red oxide/zinc oxide chrome including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give as even shade including cleaning the surface of oil dirt- dust and other foreign mater (Enamel paint other than white) including carriage of materials with in all leads, lifts and other incidentals.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new concrete masonry/asbestos cement/plastered surfaces and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and sand papering as required with ready mixed primer including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new concrete masonry/plaster surfaces with ready mixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with other than white ready mixed paint including carriage of materials with in all leads, lifts and other incidentals.

Applying one coat of Acrylic Washable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymer in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete including carriage of materials with in all leads, lifts and other incidentals.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer including carriage of materials with in all leads, lifts and other incidentals.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt,dust and other foreign matter etc. including sand paper smooth complete including carriage of materials with in all leads , lifts and other incidentals.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated bed dry brick/stone aggregate 40mm (forty millimetre) nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials with in all leads, lifts and other incidentals.

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 ( one cement : three sand : six graded stone aggregate 20mm nominal size mechanically mix finishing surface of concrete smooth including carriage of materials with in all leads, lifts and other incidentals.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cm (fifteen centimetre into twenty two centimetre) in cement mortar 1 : 6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm (ten centimetre) (ten centimetre) cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size and finished with a floating coat of neat cement and curing complete as per standard design including carriage of materials with in all leads, lifts and other incidentals.

Stone filling dry hand packed tightly under floor with in all leads, lifts and other incidentals and as per the direction of the Engineer-in-Charge

Providing and fixing 20mm (twenty millimetre) nominal bore to wall ceiling and floor galvanized mild steel tube (Heavy grade) tube fittings and clamps including making good the wall ceiling and floors .including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall- 25mm including carriage of materials with in all leads, lifts and other incidentals.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm (twenty millimetre) to 40mm (forty millimetre) nominal size bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing brass full way valve with wheel 20mm (twenty millimetre) nominal bore as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing 20mm (twenty millimetre) nominal bore G.I. Or M.I. Union of following sizes ( where not includedin the item) including carriage of materials within all leads and lifts :- including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing PE-AL-PE- composite internal seal compression fittings as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. (This type of fitting to be used for hot water supply only Reducing Tee 2025 X all branches including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) nominal bore to wall ceiling and floor galvanized mild steel tube (heavy grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials within all leads and lifts

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :- 2000 litres net capacity tank including carriage of materials within all leads and lifts

Providing and fixing vitreous china water closet squatting pan (Indian Type -W.C. Pan) size 580mm (five hundred eighty millimetre) (earth work, bed concrete foot rest and trap to be measured and paid for separately) Orissa pattern including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing viterous China wash, down water closet (Angle Indian Universal closet) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and coveto be paid for separately. including carriage of materials within all leads and lifts

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 110 mm dia. including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately). :- (10 Ltr capacity) including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cove including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 630mmx450mm (six hundred thirty into four hundred fifty millimetre) vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110 mm X 90 mm (one hundred ten into ninety millimetre) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110 mm (one hundred millimetre) dia. high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110.mm (one hundred ten millimetre) dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110.mm (one hundred ten millimetre) dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110.mm (one hundred ten millimetre) dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110.mm (one hundred ten millimetre) dia PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Flat back type of size 430mm x 260 mm x 350mm (four hundred thirty into two hundred sixty into three hundred fifty millimetre) vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing Division plate for urinal 600x300mm (six hundred into three hundred millimeter) vitreous china complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing brass bib tap (superior or heavy type) 15mm (fifteen millimetre) dia including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass pillar tap with capstan head complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.I. Union for wash basin or sink 32mm (Thirty two millimetre) dia. of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (hundred millimetre) size C.P grating including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC connection pipe with brass unions 300/450mm (three hundred/ four hundred millimetre) length 15mm (fifteen millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm (Six milimtre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer complete as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 750 x 20mm (seven hundred into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials with in all leads, lifts and other incidentals.

Constructing manhole with R.C.C. top slab in 1 : 2: 4 ( one cement : two sand : four graded stone aggregate 20mm nominal size foundation concrete 1 : 4 : 8 ( one cement : four sand : eight graded stone aggregate 40mm nominal size inside plastering 15mm thick with cement mortar 1 :3 ( one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2 :4 mix (one cement : two sand : four graded stone aggregate 20mm nominal size finished smooth complete including curing and testing inside size 800mmx800mm and 500mm deep including C.I. cover with frame (light duty single seal pattern-1) 455mmx610mm internal dimensions total weight of cover and frame to be not less than 38Kg. weight of cover 23Kg. and weight of frame 15Kg. with 300mm thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall face PVC (D Plast) rain water pipes 75mm (seventy five millimetre) dia. of working pressure not less than 4.5 (Four decimal five) kilogram/Sqm including filling the joints with approved adhesive complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC clamps ISI Marked of approved design with screws and rawal plugs etc. complete including carriage of materials with in all leads, lifts and other incidentals.

110mm (one hundred ten millimetre) dia.

75mm (Seventy five millimetre) dia.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass stop cock as complete per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT Jet Spreay of approval quality and colour 1.5 mtr. (one point five metre) tube including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals.

Equal Tees

1620 (one thousand six hundred twenty)

2025 (two thousand twenty five)

Reducing Tee

2025 (two thousand twenty five) x all branches.

Female branch Tee

1620x1620x20mm (one thousand six hundred twenty into one thousand six hundred twenty into twenty millimetre) thread.

2025x2025x25mm (two thousand twenty five into two thousand twenty five into twenty five millimetre) thread.

Female Elbows

1620x20mm (one thousand six hundred twenty into twenty millimetre) thread.

2025x25mm ((two thousand twenty five into twenty five millimetre) thread.

Male thread connector

1620x20mm (one thousand six hundred twenty into twenty millimetre) thread.

2025x25mm ((two thousand twenty five into twenty five millimetre) thread.

Female thread connector

1620x20mm (one thousand six hundred twenty into twenty millimetre) thread.

2025x25mm ((two thousand twenty five into twenty five millimetre) thread.

Couplers

1620 (one thousand six hundred twenty)

2025 (two thousand twenty five)

Reducers

2025x1620 (two thousand twenty five into one thousand six hundred twenty)

Providing and fixing PE-4l-PE - internal composite end seal compression fittings as per IS-15450-2004 for Hot water supply including cutting and making good the wall etc. carriage of materials with in all leads, lifts and other incidentals.

Equal Tees

1620 (one thousand six hundred twenty)

2025 (two thousand twenty five)

Reducing Tee

2025 (two thousand twenty five) x all branches.

Female branch Tee

1620x1620x20mm (one thousand six hundred twenty into one thousand six hundred twenty into twenty millimetre) thread.

2025x2025x25mm (two thousand twenty five into two thousand twenty five into twenty five millimetre) thread.

Female Elbows

1620x20mm (one thousand six hundred twenty into twenty millimetre) thread.

2025x25mm ((two thousand twenty five into twenty five millimetre) thread.

Male thread connector

1620x20mm (one thousand six hundred twenty into twenty millimetre) thread.

2025x25mm ((two thousand twenty five into twenty five millimetre) thread.

Female thread connector

1620x20mm (one thousand six hundred twenty into twenty millimetre) thread.

2025x25mm ((two thousand twenty five into twenty five millimetre) thread.

Couplers

1620 (one thousand six hundred twenty)

2025 (two thousand twenty five)

Reducers

2025x1620 (two thousand twenty five into one thousand six hundred twenty)

YOG RAJ SHARMA

SANTOSH KUMAR