MISC CIVIL WORKS AT C.E RESIDENCE,S.E RESIDENCE AND GUEST HOUSE KATJU MARG BAREILLY

Amount

Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01)

Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10)

Concrete with 4cm gauge I class brick ballast (class 150) , coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 )

Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.06)

First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01)

First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in Superstruture for one brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work.

First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5) mortar in Superstruture for half brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work.

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials, labour & T&P etc. required for proper completion of work.

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03)

Providing and fixing steel glazed window and ventilators of standard rolled Mann or Mahavir steel sections conforming to IS 7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included).

Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame.

S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . except cost of M.S angle and flat.

12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and including without base CC and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.

Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, , laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and Laying 6 mm thick glazed tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

Painting or varnishing old iron work in small areas or old wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

One priming coat and two coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work.

One priming coat and two coat oil bound distemper on old work including supply of all materials,labour and T&P etc. required for proper completion of the work.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres.

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05)

Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Fixing panes of glass with and including putty brads and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass.

Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.

Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).

Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete

As above item 30 but for 20 mm dia.

Providing and fixing full way 15mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

As above item (32) GM Full way Gate Valve but for 20 mm dia.

Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work.

P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.14)

Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing CP BRASS SHOWER HEAVY QUALITY ( > 225 gms ) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.18)

Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete.

Providing and fixing flat back 430X370X340 mm size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing 450X300 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work.

Wiring point for light with 1.5 sq. mm. in PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring for Plug point with 1.5 Sq.mm. PVC insulated multi standard copper cable in recessed conduct and fixing 3 pin 5 amps. Socket outlet on the recessed with board and 5 amps, switch earthing the third pin etc. as required

Supply and fixing of Button holder complete in all respect.

Wiring for power point with 1.5 sq. mm multi standard copper conductor cable, flush types switch and 3 pin 15A, 240 V flush type socket in suitable MS 17.5 mmx100mmx50-mm size with bakelite sheet cover 3 mm thick with brass machine screw and washer

Supply and fixing of 4 ways 16A SPN metal clad rewireable type distribution fuse board complete with 16A/240V SPN metal clad rewireable type switch fuse on M.D.F.E.G. board complete in all respect.

Wiring for fan point with 1.5 Sq.m. PVC insulated multi standard coper conductor cable as earth wire drawn in side the PVC conduit complete.

S/Wiring of submain with 2 No. 2.5 Sq.mm. PVC Multi Standerd copper cunductor cable in 20 mm dia PVC conduit complete.

S/Fof 6A to 32 Amp.two pole MCB(10KA)

S/F OF Load kontakt 4 way SPN DP BOX (consumer Unit )with built in 63 Amp. SPN isolator for incoming complete in the all respects duly fixed on the angle iron frame required section as direction as per site condition.

Supply and fixing of power plug with 16A/240V ICDP switch (B-category) and 3 pin 15A/250V socket with porcelain base on the well seasoned posished MDFE/Teak wood double board

supply of wiring of 3 number 4sq. mm FR PVC insulated 1100V grade multistand single core cooper conductor cable in 25 mm dia heavy guage rigid steel conduit consiled in wall with two number 14 SWG copper earth continuity wire ,including matching colour wash etc. complete in all respect

As in item No 54 but in 25 mm dia heavy duty (2mmthick) PVC conduit with 2 nos sq.mm FR PVC insuleted multisand copper conductor cable sa earth continuity wire drawn in conduit

Providing and applying fibre reinforced elastomeric liquid water proofing membrance with resilient acrylic polymers(asian,cico,durabuild or equivalent brand as approved by E/I )having sun reflectivity index(SRI)of 105 on top of concrete roof in three coats @10.7litre/10sqm. One coatof self priming of elastomeric waterproofing liquid(dilution with water in ratio of 3:1) and two coats of undiluted elastomeric waterproof liquid (dry film thickness of complete application/system not less than 500microns).The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particleswith fine brushes,complete in all respect as per the direction -in-charge with 7years warranty.

GLOBAL CONSTRUCTIONS

mohd faraz

innovative enterprises