Construction of Transfer station, In Karamsad Anand Municipal Corporation Area,KAMC Dist Anand

Name of Work: Construction work of Transfer station, AT Karamsad Anand Municipal Corporation Area.

Abstract of Schedule-B

Description Qty Unit Amount

Clearing and grubbing road land including uprooting rank

vegetation grass bushes, shrubs, sapling and trees girth up

1 to 300 mm removal of stumps of trees cut earlier and 5030.00 Sq.m 11.23

disposal of unserviceable materials (B) By manual in area of

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead. (A) Loose or soft

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

4 mm nominal size) and curing complete excluding cost of 193.20 cu.m 4046.42

formwork and reinforcement for reinforced concrete work

in (A) Foundations (upto 10 ton)

Providing & laying controlled cement concrete M-250 with

curing etc. complete incl. the cost of form work but

excluding the cost of reinforcement for R.C.C. work for

Providing & laying controlled cement concrete M-250 with

curing etc. complete incl. the cost of form work but

excluding the cost of reinforcement for R.C.C. work for

column up to plinth.

Providing & laying controlled cement concrete M-250 with

curing etc. complete incl. the cost of form work but

excluding the cost of reinforcement for R.C.C. work for

Ground beam & Plinth beams etc.

Providing & laying controlled cement concrete M-250 with

curing etc. complete including the cost of form work but

8 excluding the cost of reinforcement for R.C.C. work in 4.00 cu.m 5746.55

foundation and plinth for Copping & Beam etc.

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork but

9 excluding the cost of reinforcement for R.C.C. work For 4.10 cu.m 5569.06

Walls, from top of foundation level upto floor two level

Filling available excavated earth (excluding rock) in

trenches ,plinth, sides of foundations etc.in layers not

exceeding 20cm in depth consolidating each deposited layer

by ramming & watering.

Filling in foundation and plinth with murrum or selected

11 soil in layers of 20cm thickness including watering 1392.80 Cu.m. 294.38

rammingand consolidating etc. complete

Description Qty Unit Amount

Carring out plinth treatment to post construction existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with

I.S.I specification. Using ehlordene and ehiorpurfiles 20 EC.

As Per 6131_paret-ll eonsentration Weight one percent is

recommended i.e one litre 20 Ee chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical I Sqm of

surface is recommended as per I.S

Providing & laying controlled cement concrete M-250 with

curing etc. complete including the cost of form work but

excluding the cost of reinforcement for R.C.C. work at

Ground Floor for Column.

Providing & laying controlled cement concrete M-250 with

curing etc. complete including the cost of form work but

excluding the cost of reinforcement for R.C.C. work at

Ground Floor for Beam

Providing and Laying controlled Cement Concrete M-250

and curing etc. Complete including the cost of form work

but excluding the cost of reinforcement for R.C.C. work at

Ground Floor for Slabs & Shelves etc.

Providing & laying controlled cement concrete M-250 with

curing etc. complete including the cost of form work but

excluding the cost of reinforcement for R.C.C. work at

Ground Floor for Lintel

Providing and laying cement concrete M.200 for Providing

& laying controlled cement concrete M-250 with curing etc.

17 complete including the cost of form work but excluding the 3.00 cu.m 6445.06

cost of reinforcement for R.C.C. work at Ground Floor for

Providing TMT Bar FE 500/500D reinforcement for R.C.C.

18 work including bending, binding and placing in position 61201.70 Kg 77.29

complete upto floor two level. (upto 10 ton)

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

Extra for brick work in superstructure above plinth level

upto floor two level (B) Conventional (upto 10 ton)

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) and

finishing with a floating coat of neat cement slurry. (upto

Providing 15mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar

22 1:3 (1-cement:3-sand) plastering on ceilings and soffits of 92.00 Sqm 280.46

stairs upto floor two level instead of plastering on walls.

finishing with a floating coat of neat cement slurry.

Description Qty Unit Amount

20 mm. thick sand faced cement plaster on wall upto height

10 meters above ground level consisting of 12mm thick

23 backing coat of c.m. 1 : 3 (1 cement : 3 sand) and 8 mm thick 1524.00 Sqm 352.44

finishing coat of c.m. 1 : 1 (1 cement : 1 sand) etc. complete

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

24 shade after thoroughly brushing the surface to remove all 1524.00 Sqm 120.26

dirt, and remains of loose powdered materials etc. complete

Applying two coats of Birla(white cement based) or Asian

(acrylic lapy putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to

25 give an even shade including thoroughly brushing the 408.00 Sqm 40.59

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

26 surface to give an even shade including throughly brushing 408.00 Sqm 82.85

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete.

(ii) Fully Panelled.

Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement

on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam

done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with fastener sleeve & alluminium

fixtures & fastenings.

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm (Jindal

Section:2434, @ Wt. 0.643 Kg/mt) with colour Powder

Coated alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

Providing and laying polished kota stone slab flooring over

20 mm (average) thick base of cement mortar 1 : 6 (1

30 cement : 6 course sand) laid over and jointed with grey 70.40 Sqm 1019.39

cement slurry including rubbing and polishing etc. complete

(A) 25 mm thick (upto 10 ton)

Description Qty Unit Amount

Providing and laying Mirror polished Machine polished

Telephone Black Madras Granite stone slab 18mm

(Average) thick for Door / Windows Sill & Jams Cladding as

per Design incl. full moulded round front edge in trade of

31 steps laid on 10 mm thick cement mortar 1: 3 (1 cement: 3 45.00 Sqm 2705.45

coarse sand) jointed with grey cement slurry including

rubbing and polishing etc. complete. For Door / Windows

Sill & Jams Cladding.

Providing and fixing window having extruded aluminium

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg /

Rmt), horizontal two track member size 61.85 mm x

mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x

1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt)

with sliding shutters of horizontal member size 40mm x

32 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 20.00 Sqm 1713.70

0.456Kg/mt), vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/

Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc.

complete for window.

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

33 spacings and frame alround, square or round bars with 3242.00 Kg 106.23

round headed bolts and nuts or by screws (A) Plain Grill.

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

34 interior to give an even shade including cleaning the surface 81.00 Sqm 92.20

an even shade including cleanicn the surface of all dirt, dust

and other foreign matter.

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar cream out upto surface using

white cement including rounding off junctions and

extending them upto 15 cm along the wall, clearing with

water and oxalic acid etc. as directed.

Providing, Supplying, Installation, Testing and

Commissioning of Fully Electronic Pitless Type

Weighbridge, 50 MT Capacity, 12 m × 3 m Platform Size,

kg Division, complete with heavy-duty bolted steel platform

structure, 08 Nos. digital load cells, intelligent weighing

terminal, junction box, keyboard, communication cables, all

necessary accessories, transportation, fitting, Government

stamping and all incidental works required for complete

satisfactory operation, as directed by the Engineer-in-

Description Qty Unit Amount

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

38 channels angles Tees, flats, with connecting plates or angle 483.20 Q. 9108.48

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and 1.5M. deep including C.I.

cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not

less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-

Coarse sand) (3) C type depth 2.25 Metre for 150mm

diameter sewer.

Description Qty Unit Amount

Providing, supplying, installing, testing and commissioning

a complete High Pressure Misting Odour Control System for

Municipal Solid Waste Transfer Station/Waste Transfer

Shed, comprising an 11 LPM high-pressure piston pump

operating at 80 bar with a 2.2–2.5 kW, 3-phase electric

motor, automatic electrical control panel with cyclic timer,

dry-run protection, auto/manual operation, pressure

regulator and all necessary controls, SS-304 high-pressure

misting pipeline (12.7 mm dia.), SS-304 fogging nozzles

(0.30 mm orifice), three-stage water filtration unit, valves,

fittings, hoses, supports and all accessories, designed to

uniformly atomize an eco-friendly odour-neutralizing

41 solution (OdoServe or approved equivalent) for effective 753.00 Sq.m 3302.70

suppression of hydrogen sulphide, ammonia, mercaptans

and other foul odours generated from municipal solid

waste, including complete installation, testing,

commissioning, performance trial, operator training and all

labour, materials, tools and equipment required for

satisfactory operation, complete in all respects, excluding

only civil works, water storage tank and incoming electrical

power connection as specified complete installation, as

approved by the Engineer-in-Charge.

Providing, Laying, spreading and compacting graded

stone aggregates 150 mm compacted thick wet mix

macadam [using B.T. M.C. aggregates - 22.4 to 53 mm

(27.5%), Stone dust below 2.36 mm size (22.5%) -

times loose volume / Cmt. of compacted volume], as per

42 M.O.R.T. & H. specification including premixing the material 417.50 Cum 1282.55

with water at OMC in mechanical mix plant, carriage of

mixed material by tippers to site, laying in uniform layers

with paver / mortar grader in sub base / base course

on well prepared surface and compacting with vibratory

roller to achieve the desired density.

Construction of dry lean cement concrete Sub-base over a

prepared sub-grade with coarse and fine aggregate

conforming to IS: 383, the size of coarse aggregate not

exceeding 25 mm aggregate cement ratio not to exceed

15:1, aggregate gradation after blending to be as per

table 600-1, cement content not to be less than

43 KG/Cum, optimum moisture content to be determined 417.50 Cum 2863.42

during trial length construction, concrete strength not to be

less than 10 Mpa at 7 days, mixed in a batching plant,

transported to site, laid with a concrete sensor paver

method, compacting with 8-10 tonne vibratory roller,

finishing and curing etc. complete.

Description Qty Unit Amount

Construction of M40 Grade Thine White Topping With Plain

Cement Concrete pavement over existing surface with

approve grade cement @ 440 kg per cum and as per IRC SP -

76, Coarse and Fine aggregate confirming to IS

maximum size of fine aggregate not exceeding 25 mm,

mixed in a batching and mixing plant as per approved mix

44 design, transported to site, laid with a fixed form or slip 557.00 Cum 8985.97

from, spread, compacted and finished in a continuous

operation including provision of contraction joint, joint

filler, sealant primer, joint sealant, admixtures as approved,

curing compound, finishing to lines etc. and grades as per

Saw cutting, H/ 3mm depth, in pannel size of 1.25m x

45 m for any size of Road by saw cutting machine with all 4468.56 Rmt 35.35

Providing and fixing to wall ceiling and floor

kgf/cSmt working pressure polythelene pipes of the

following outside dia low density complete with special

flage compression type fittings, wall clips etc. including

making good the wall celling and floor. (G) 110mm dia.

Providing cement vata (10 cm x 10 cm size) quarter round

47 in cement mortar 1 :1 including neat cement finishing 35.00 Rmt 24.28

watering etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in

skitring risers of steps and dado on 10 mm thick

49 cement plaster 1 : 3 (1 cement : 3 coarse sand) and pointing 76.00 Sqm 985.47

in white cement jointed with white cement slurry.

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fitting and clamps including making

good the wall, ceiling and floor etc. complete. [C] 25 mm

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fitting and clamps including making

good the wall, ceiling and floor etc. complete. [A] 15 mm

Providing and fixing in position cowel vent to pipes. (B)

Providing and fixing in position cowel vent to pipes. (C)

Providing and fixing cast iron (spun) nahni trap of the

following nominal diamter of self cleaning design with C.I

54 screwed down or hinged grating including cost of cutting 5.00 Nos 634.71

and making good the walls and floors 100 mm. inlet and

Description Qty Unit Amount

Providing and fixing wash down water closet (European

type, W.C. Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) including providing & fixing plastic seat and

cover for wash down WC w

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S. brackets painted white including sutting

holes and making good the same but excluding fittings.(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Providing and fixing screw down bib taps of follwing size

58 (A) Brass screw down bib tap polished bright. (ii) 20 mmdia 10.00 Nos 214.81

Providing and fixing brass screw down stop tap. (A) 15mm

Providing and fixing gun metal check or non return fullway

wheel valve (C) 25 mm. dia.

Providing and fixing gun metal check or non return fullway

wheel valve (E) 40 mm. dia.

Providing and fixing chromium plated brass half turn flush

62 cock of approved quality including fixing in pipe line etc. 5.00 Nos 263.77

complete (ii) 25 mm dia

Providing and fixing ball cock of approved quality as

directed. (A) Copper Metal (i) 25 mm. dia.

Providing and fixing C.I. Manhole cover 0.60m x 0.45m. size

having weight not less than 35 kgs.

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge.

65 Pipe shall be fixed on the wall with the help of clamp 140.00 Rmt 72.65

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge.

66 Pipe shall be fixed on the wall with the help of clamp 410.00 Rmt 91.84

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40 mm

dia. U.P.V.C. Pipe (SCH - 40 ) including fittings of PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent make or as

approved by Engineer In Charge. Pipe shall be fixed on the

67 wall with the help of clamp at every two meter C/C or shall 220.00 Rmt 148.12

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Description Qty Unit Amount

Providing laying and jointing in true line and level

diameter U.P.V.C. SWR Type B pipe conforming to IS 13592-

1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be

68 fixed on wall using of PVC clamp of the size 160 mm 210.00 Rmt 834.38

diameter x 210 mm length x 196 mm high at every

mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes

etc. includingtesting of pies and joints and jointed with

adhesive solvent cement including cost of all materials

Providing and fixing PVC SWR Nahni trap IS 14735 for drain

- 100mm diameter with jali of the following nominal

69 diameter of selfcleansing design with C.I scread down or 6.00 Nos 586.27

hinged grating includingthe cost of cutting and making good

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

70 300mm x 300mm size (inside) with standard weight.(i) 6.00 Rmt 1246.92

Square mouth traps.(B) 150mm x 100mm size P or R type

Constructing brick masonray road gully chamer

71 mm x 450 mm x 660 mm including 500mm x 450mm 3.00 Nos 2017.19

C.I. horizontal grating with frame complete.

Constructing brick masonary road gully chamer 1100 mm

x 500 mm x 775 mm including 500 mm x 450 mm

C.I.horizontal grating with frame and vertical grating

Providing erecting and fixing double coated Syntex or

equivalent PVC. (ISI) mark water tank of reqd capacity each

with all necessary fittings & connection etc. comp on terrace

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan

lines and two diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed to

posts with G.I,staples including fixing the postsin ground

with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete.

Box cutting the Road surface to proper slope and camber for

making a base of road work including removing the

excaveted stuff and dipositing on the road side slopes

directed upto 50 mtrs.lead.

Drilling of pilot 250/325 mm dia bore hole in all strata

including dual over burdan strata by combination DR / DTH

76 Rig. including lowering of 200/250 mm dia MS ERW pipes 55.00 Mtr. 1495.81

in bore hole as suggested by Hydrologist.

Providing 200 mm dia GRADE HEAVY cage type wire

77 wound low carbon galvanized screen pipe as per GWSSB 13.00 Mtr. 2001.82

78 Providing 200 mm dia UPVC casing pipe CM type. 15.00 Mtr. 1458.44

79 Supply of gravel of selected size 4 mm. To 6 mm 0.30 Cu.m 2049.29

Clamp made from MS plate with 3 holes on either side with

80 nuts & bolts of standard make & suitable to 200mm dia 1.00 Pair 1643.99

pipe. size 750mm x 75mm x 16mm.

Description Qty Unit Amount

Bore plug having 100mm height made from MS plate with

Holes at equal distance on circumference for nut bolts type,

locking arrangement with nuts-bolts & lock nuts of

standard make etc. complete suitable for 200 mm ERW

pipes (Thickness of plate is minimum 05 mm for top also).

Reducer made from 6 mm thick plate (M.S.) for ERW pipes

82 of size 200 mm dia. X 250 mm dia.X 600 mm length 1.00 No 1884.27

Steel bent plates suitable to 200 mm dia size pipes. size

150mmx150mmx6mm.

Motor rating 3 HP pump having capacity of 106 LPM at

84 mt head suitable for 32mm dia . Delivery pipe. Cat II 1.00 No 14425.83

Geohydrological ground water investigation .(with vehicle

85 charges ) ii .(200/250mm dia deep tubwell (with water 1.00 No 14428.86

Flat PVC cable for submarsible pump as per detailed

specification as per GWSSB R/C (3) 1X3X4 sq mm

Bore developing by air comppressor of capac ity 400 CFM /

88 Providing and laying HDPE PIPE 63mm dia (PE-80) 50.00 MTR 131.30

Lowering of submersible motor pump set complete with

required nos and size of casing pipes ereced by means of

proper chainpulley block and pipe wrenches after checking

of thread of each pipe with coupling to take the load of the

pump set and pipes assembly filld up with water.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic /

90 Wooden box, single mounting base frame covered with 110.00 Pt. 582.77

textured / metallic / white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type

switch and hum free EME four or more step type electronic

fan regulator with separately mounted and accessories

with earth continuity of following type erected on PVC /

91 Metallic/Wooden box, single mounting base frame covered 25.00 Pt. 809.01

with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Description Qty Unit Amount

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall / ceiling

complete Cat-III

Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A Modular

type switches and following type of accessories erected on

PVC / Metallic/Wooden box, single mounting base frame

94 covered with textured / metallic/white front plate modules 10.00 Pt. 725.18

erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or

H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete Cat-III

Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate , modules

erected with necessary connection. As desired by Engineer

In charge (9) 16 Amp. SP one way switch. Cat.III

96 (10) 6/16Amp. Universal socket. Cat.III 35.00 Ea 199.98

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed.(a) 20 mm

Providing & erecting PVC Corrugated Flexible Conduit with

99 required nos. of coupling, PVC bushes, Check-nuts etc. 50.00 Mtr. 17.17

complete of following sizes.(1) 20 MM

Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

100 necessary end caps Internal and external bend, flat bends, 120.00 Mtr. 428.24

coupler, tee etc..All necessary accessories and measuring of

following sizes(2) 100 mm x 50 mm trunking

Description Qty Unit Amount

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/ceiling, with

101 sq. mm copper conductor FRLS PVC insulated stranded wire 1450.00 Mtr. 104.03

of green colour for earth continuity of following size (a)

with medium class Rigid PVC pipe and accessories. (B)

wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper

102 conductor FRLS PVC insulated stranded wire of green 650.00 Mtr. 140.39

colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories. (a) 2 wire

Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

required.(e) One wire 6.00 sq. mm

105 (g) One wire 16.00 sq. mm 30.00 Mtr. 177.76

106 (h) One wire 25.00 sq. mm 20.00 Mtr. 295.93

Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed.e) 1.50 Sq.mm 3 core round

PVC sheathed. (White Only)

Supplying & erecting approved make LAN cable of following

108 size in existing pipe as per direction.[C] CAT - 6 120.00 Mtr. 47.47

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board

erected on PVC / Metal board with 3 mm thick PC

(Polycarbonate) / Acrylic sheet erected as directed

109 1 no. 6A/16A universal plug-switch combined. 8.00 Ea 1133.22

4 nos. 6A Switch

4 nos. 6A 5 pin Plug.. [B] For Modular Type Accessories.

Decorative call bell Ting-tong box type 250 volts complete

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 120 to

V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K to

111 6500K, Luminaire efficacy> 85 lumens/watt , LED efficiency- 60.00 Nos 373.70

110 lumens/watt LED driver efficiency > 85 % CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux

make LED used for luminaire. ( fitting required LM-79 & LM-

80 Certificates) (A) Tube Light with integral driver (iv) 22-

24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Description Qty Unit Amount

(iv) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete. IP20 (vi)

36 watts, 24" x 24", Surge- 2KV CAT-III

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii) 48 -

59 Watts Cai-III

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (iv) above 90 to 119 watts.Cat-III

Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with Fixed

115 thermal & magnetic release suitable to work on A.C. supply 12.00 Nos 6790.23

50 c/s. with all internal connections & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

116 thermal & magnetic release suitable to work on A.C.supply 6.00 Nos 8861.74

50 c/s. with all internal connections & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat

Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V . having

normal current rating up to 250A. with variable thermal &

117 magnetic release suitable to work on A.C.supply 50 c/s. with 2.00 Nos 23041.13

all internal connections & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

supply of Approved make Iron Clad or metal clad four pole

118 change over switch 415V. confirming to IS of following 1.00 Nos 17915.38

capacity (A) 200 A / 250 A Cat-lll

Erection & connection charges for 200A/ 250A / 300 A

119 /325 A HRC TPN as following (b)Erection on New angle 1.00 Nos 172.71

iron frame duly painted with red oxide .

Description Qty Unit Amount

Supplying and erecting triple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(C) Suitable for 300 Amp. capacity

providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

121 having breaking capacity 10 KA to be erected in existing 25.00 Nos 123.22

box. confirming to IS 8828/1996 with ISI Mark. CAT III

Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity.(B) 40 Amp. CAT-III

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (b)40 Amp. CAT-III

124 (c)63 Amp. Cat.III 4.00 Nos 811.03

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

125 appropriate nos. of MCBs.(The DBs should be used of same 8.00 Nos 2913.85

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (ii)6

Providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA and suitable

for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP CAT III

Providing and erecting required size Aluminium strip for

127 earthing of H.T. , OCB / ACB / Transformer, LT panel board, 8.00 Kg. 225.23

Motors etc. using copper clamp.

Providing and erecting HOT deep Galvanised iron strip wire

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

For using salt and charcoal / coke as required for pipe type

Description Qty Unit Amount

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test

131 certificate) & having back filling compound of (B) Inner 6.00 Nos 4591.46

chemical (CCM Compound)- Resistivity:- 0.2 / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted. (a) For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr Back filling compound -

Nos Bag of 15 Kg.

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions

& cable alley as per requirements & instruction of engineer-

in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder coating.(The

rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following

approved manufacturers with following size. (A) locally

fabricated panel board (i) with 350mm depth

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

133 laid on wall with necessary clamps or in existing trench / 50.00 Mtr. 341.38

pipe of following size of cables (C) 3 1/2 core 50 Sq. mm (

25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

134 laid on wall with necessary clamps or in existing trench / 1200.00 Mtr. 168.67

pipe of following size of cables .(c) 4 core 10 Sq. mm

Description Qty Unit Amount

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

135 laid on wall with necessary clamps or in existing trench / 358.00 Mtr. 229.27

pipe of following size of cables(B) 4 core 25 Sq. mm

Making trench in soft soil of suitable width of 90 cms deep

for laying cable or locating the fault all over the run and

backfilling the same and making the surface as normal

Supplying following size of Light duty “A” Class G.I . Pipe &

137 erecting as directed by Engineer-in-charge. (A) 25 mm dia 10.00 Mtr. 172.71

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II ) with necessary connecting accessories of same

139 material at required depth for laying of cable. below ground 550.00 Mtr. 62.62

/ road surface for enclosing cable and back filling the same

to make ground as per original.(A)50 mm dia

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

140 having 3blades with aluminium blades with , canopy & 30 25.00 Nos 1948.29

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each side

142 and pierced through a 16 Gauge M.S. box / Heavy Duty PVC 25.00 Nos 108.07

box complete erected concealed in Ceiling with necessary

Supplying & erecting approved make low noise decorative

exhaust fan having square frame ABS body with inbuilt

lowers & square frame. 200mm with 1350RPM

Providing recess in wall or window frame suitable for

erection of Exhaust fan complete with plastering and colour

washing to match the colour of the wall or window

complete with expanded metal in order to render the fitting

in accessible and the room water-proof.

Supply of Fibreglass Step (A Type) Ladder - 10 FT having

following specifications : It should have nonconductive

Structural moulded top, with Slots to keep tools close at

hand, inside Spreader Braces, Aluminium Feet with thick

rubber tread, nonconductive Full channel Fibreglass, two

pairs of gusset support at the bottom step and All gussets

are heavy duty steel. Capacity : 300 lbs. Step Size : 3” Width

: 29” Approx. Spread : 66”Approx. Wt. : 19 Kg Approx. Cube :

Description Qty Unit Amount

Supplying & erecting Galvanized iron pipe post “B” class

88.9 mm O.D 6 mtr. Long duly painted with two coats of

146 aluminium paint complete with metallic base- plate of 300 10.00 Nos 4440.97

mm x 300 mm x 4mm thick for using as a compound light

pole with approx. weight 47 Kg.

Providing 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 45 x

45 x 100 cm. Deep in below ground level with plinth of

147 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level 10.00 Nos 809.01

with necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

148 having locking arrangements with mounting clamp with 10.00 Nos 515.10

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (b)

250mm x 200mm x 100mm [deep]

Supplying and erecting Street light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size

of pole top having nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint

with following nos of arms.[A] Single Arm bracket 0.5 Mtr

Providing & erecting water cooler having storage capacity

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 450 C. The outlet temp. of the water should drop by

15^C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet &

outlet connection. The body of water cooler will be made

from Stainless Steel.

Supply Installation Testing & Commissioning of 2MP IR

Dome Camera(2.8mm Lens with Aperture of F1.6 (By

Default)/F2.0(On demand)),Audio Support, 1/2.8” SONY -

CMOS, 2MP, 0Lux with IR LED on, 2.8mm IR Distance up to

50m, Video Analytics: Trip Wire, Intrusion

Detection and Motion Detection, H.265/H.264/M-JPEG

Video Compression, PoE Support, NAS Storage, SD

Card(512GB), Quad Stream Support, 1/1 Audio I/O, 1/1

Alarm I/O, True WDR, 3D Noise Reduction, Adaptive

Streaming, Smart Streaming and ROI, SNR > 70 dB, ER

Compliant & Cyber Secured as per ISO / IEC 27402, BIS, CE,

FCC, RoHS, IK10, IP67, UL, NEMA 4X, NDAA Compliant &

STQC Certified.

Description Qty Unit Amount

Supply Installation Testing & Commissioning of 2MP IR

Bullet Camera (6.0mm Lens with Aperture of F1.6 (By

Default) / F2.0 (On demand)), Audio Support, 1 / 2.8”

SONY - CMOS, 2MP, 0Lux with IR LED on, 6.0mm, IR

Distance up to 50m, Video Analytics: Trip Wire, Intrusion

Detection and Motion Detection, H.265 / H.264 / M-JPEG

Video Compression, PoE Support, NAS Storage, SD Card

(512GB), Quad Stream Support, 1/1 Audio I/O, 1/1 Alarm

I/O, True WDR, 3D Noise Reduction, Adaptive treaming,

Smart Streaming and ROI, SNR > 70 dB, , BIS, CE, FCC, RoHS,

IK10, IP67, UL, NEMA 4X, NDAA Compliant & STQC

Supply Installation Testing & Commissioning of 64 Channel

NVR with 4K Support and 8 HDD Slots, 64 IP Channel

Inputs; 4K HDMI, 1/1 Audio I/O and 2/1 Alarm I/O, 12MP,

8MP, 5MP, 4MP, 3MP, 2MP, 720p, D1 and CIF Recording

Resolution, 4x 4K/ 10x 3MP/16x 1080p Local Decoding,

SATA HDD Support (Maximum 18TB Capacity per Slot, Hard

153 Disk Not Included), Save Storage Space with Adaptive 1.00 Ea 69552.64

Recording and Camera-wise Recording Retention, SMS &

Email Notification, Video Pop-up, Alarms and Instant Calling

from Mobile Application, Throughput - 512Mbps Uplink,

512Mbps Downlink, ONVIF and support for other camera

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit

RJ45/SFP Combo ports Advanced L2 switching and security

154 features L2+ Static Routing Optional “standard mode” or 4.00 Ea 32316.77

“surveillance mode” management user interface 193 W PoE

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully

Supply, Installation, Testing and Commissioning of 10TB

HDD Enterprise / Surveillance Harddisk

Supply, Installation, Testing and Commissioning of 43" 4K

Supply, Installation, Testing and Commissioning of 9U

158 Indoor Rack with required accessories like fan, 6 socket 2.00 Ea 9374.82

5/15amp PDU, hardware packet

Total Amount Without GST :

Total Amount Without GST :