CA NO.CWE BLY/ GE (W) /41 OF 2025-26PROVN OF LINK ROAD TO CWTS TRG SIMULATOR IN DOGRAI COY TRG AREA (APPROX 300 MTR) OF JRC BAREILLY UNDER GE (WEST) BAREILLY

Excavation over areas n.exc.1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated material to a dist n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.

Rolling and consolidation of formation surface in cutting incl watering with 8 to 12 tonne power road roller complete all as specified and as directed.

M&L for soiling (or sub grade) 150 mm thick spread thickness in two layers of 75 mm each with broken boulders or quarried stone 63mm nominal size, interstices filled, surface formed and rolled and consolidated with 8 to 12 tonne power to req gradient and camber complete all as specified and as directed.

M&L for 150mm thick (consolidated thickness) WMM in 2 layers of 75mm each with granite, trap or basalt coarse aggregate of grading 2 (63 to 40mm size) spread, rolled and consolid-ated with 8 to 12 tonne power roller to req gradient & camber complete all as specified and as directed.

M&L for preparing surfaces by brushing with wire brushes for removing caked mud, etc., sweeping with brooms and finally fanning clear surface with gunny bags and applying priming/tack coat with bituminous primer at 10kg/10 sqm using paving bitumen complete all as specified and as directed.

M&L for premix BM (consolidated thickness 75 mm or less) thick using binder content @ 4.50% paving bitumen of any penetration laid/rolled compacted to req gradient & camber with 8 to 10 Tonne power roller complete all as specified and as directed.

M&L for Preparing of black top bituminous surfaces by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc incl removing mud etc to a distance minimum 1.50m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanisum, supplying, laying, spreading 30 mm consolidated thickness of semi dense asphaltic bituminous concrete carpet (VG-30) with 0.406 cum crushed and graded coarse aggregates with design mix formula with bitumen not less than 5.5% binder content using paver with mechanical paver all as specified in clause device for automatic leveling and profile control within the specified tolerance as mentioned in SSR Part-I , rolled with 8 to 10 tone powar Roller to uniform smooth surface and consolidated to required camber and gradient with power roller for uniform smooth surface complete all as specified and directed.

Material and labour for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic exc 10 cm wide n exc 15cm wide road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed.

S&F for delineator 1200mm long made of 2 mm thick steel sheet rectangular OD size 75 x 100mm. Bottom plate 2mm thick of size 150 x 150 mm for firm grip welded to base. Top end closed with 2mm steel sheet. At top on both sides diamond grade cube corner micro white reflector of size 75 x 125mm laminated in 2mm deep cavity to make it scratch resistant. Post to have two bands all around of white/yellow/red reflective sheet of width 225mm by keeping black coat as bands for greater night visibility. All coated with heat process and baked to 120°C or powder coated to make all weather resistant and fixing in PCC(1:2:4) with size of block 150mm x 150mm x300mm deep including required excavation and earthwork complete all as specified and directed. Make :- Cat part No GPL-11-16 of Greenlite or equivalen make of 3M/ Dark eye. Note: The rate of PCC and earth work is included in this item and nothing shall be paid extra.