EI work for Doctors room and toilets regarding RATTIRER SATHI at GMH Kalyani

Amount

Distribution wiring in 1.1 KV grade 3 X 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make - Finolex / RR Kabel / Havells) partly in 20 mm size MMS PVC rigid conduit 'FR' (Precision) [for ceiling portion only] and in 19 mm bore, 3 mm thick polythene pipe [for horizontal & vertical run embedded in wall] to light/fan/call bell points with Piano Key type switch (Anchor) fixed on MS CRC sheet metal (16 SWG) switchboard on wall complete with 3 nos. suitable size “Ph, N & E” copper bar incl. bakelite/ perspex top cover 3 mm thick and incl. 175 mm x 100 mm x 65 mm inspection box, making earthing attachment, painting the MS box and mending the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed). Average run - 6 Mtr.[5(b)/E-15]

Average run - 8 Mtr. [5(c)/E-15]

Distribution wiring in 1.1 KV grade 3 x 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make - Finolex / Havells / RR Kabel) in 20 mm size MMS PVC rigid conduit 'FR' (Precision make) to 6 A flush type plug socket & Piano Key type switch (Anchor) fixed on MS CRC sheet metal (16 SWG) switchboard cum JB on wall incl. bakelite/perspex (wall matching colour) top cover 3 mm thick and incl. painting the MS box and mending well the damages to original finish. On Board - [4(a)/E-15

S & F of MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting. [29/D-14]

S & F of step and socket type fan regulator (Anchor make) on existing sheet metal switch board with bakelite / perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover including making necessary connections etc. [18(a)/E-6]

S & F of 240 V, 6 A plug socket - 2 nos. with separate 6 A switch (Anchor) - 2 nos. on SM switchboard embedded in wall incl. S & F 175 mm x 100 mm x 65 mm MS (16 SWG) switchboard and bakelite top cover of 3 mm thick by brass screws after making housing for the switch by cutting bakelite cover and making necessary connections as required. [10(b)/E-4] & [14(a),15(a)/E-5]

S & F of 240 V, 20 A plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150 mm x 100 mm x 65 mm MS (16S WG) switch board and bakelite/perspex top cover of 3 mm thick by brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-6/22)

S & F of 240 V, 3 nos. 6 A & 1 no 20 A plug sockets with separate 3 nos. 6 A & 1 no. 20 A piano key type switches with indicator & 16 A kit-kat fuse unit (Anchor) on sheet metal switch board embedded in wall incl. S&F of 240 mm X 200 mm X 65 mm MS (16 SWG) switch board and bakelite top cover of 3 mm. thick by brass screw and making necessary connection as required. [E-7/25]

S & F of 240 V, 20 A Piano key type Plug Socket (Anchor) on sheet metal switch board incl. S & F 100 mm x 100 mm x 65 mm MS (16 SWG) switch board and bakelite top cover of 3 mm thick by brass screws after making housing for socket by cutting bakelite cover and making necessary connections as required (For AC Machine). [17(b) / E-6]

Supply & Fixing of following ways 415 V, double door VTPN MCB DB (Make - Make - Legrand / ABB Elegance / Schneider / Siemens) for 160 A MCCB incomer, 63 A SP/TP MCB outgoing with IP-43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [15/D-11] 6 Way

S & F of 415 V, 32 A per way double door HTPN MCB Distribution Board with IP-43 protection (Make - Legrand / ABB Elegance / Schneider / Siemens), concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment --- [14/D-10] 4 Way

S & F of 240 V, 6-16 A per way, (2+10) way double-door SPN MCB Distribution Board with IP-43 protection (Make - Legrand/ABB Elegance/Schneider / Siemens), concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [13/D-9]

S & F of 4 way (Make - L&T/ABB/Siemens) MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. [11/D-9]

S & F of 415 V, FP MCCB (Make - Legrand / ABB/ Schneider / Siemens) of breaking capacity 36 kA with adjustable thermal and fixed magnetic setting in VTPN DB and necessary connection. [10/D-8] 100 A

S & F of following 240/415 V, DP/FP, MCB type Isolator (Make - Legrand / ABB / Schneider / Siemens) on din rail of SPN DB and necessary connection. [6/D-5] 240 V, 32 A, DP

S & F of following rating MCB of breaking capacity 10 kA & C characteristics (Make - Legrand / ABB / Schneider /Siemens) on din rail of VTPN / HTPN / SPN DBs and necessary connection. [7/D-6] 240 V, 6/10/16/25/32 A SP MCB

415 V, 63 A TP MCB

415 V, 32 A TP MCB

Supplying and fixing double door sheet steel (16 SWG), powder coated cable end box for horizontal / vertical TPN DB enclosure with IP-43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [16/D-12]. for 6 way HTPN MCB DB

for 4/6/8 way VTPN MCB DB

Supply and installation of 240 V, 12-way, double door, SS enclosure, powder coated, IP-43 protection Timer DB with neutral bar, Din Rail and comprising with 1 no. 20/25 A DP MCB ('C' Curve,10 kA,), 1 no. 24-hour digital Time Switch, 1 no. 20/25 A DP contactor, 1 no. 20/25 A AC Starter (Make - ABB/Schneider/Legrand/Siemens) & internal wiring by suitable size copper wire, 1 no. Auto Mannual bypass Toggle Switch, provision for earthing attachment, LED indication light on on-off condition. (For AC Machine)

Cutting Channel of following size on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge polythene pipe using anchoring chemical (Hilti/Sika), GI 'U' hooks of 8 SWG, 18 SWG GI wire as fish wire and mending good damages to original finish by using own tools and tackles - Channel size - 40 mm x 40 mm and 19 mm diameter 3 mm thick polythene pipe without earth continuity wire.[6(b)/E- 3]

Channel size - 43 mm x 43 mm and 25 mm diameter 3 mm thick polythene pipe without earth continuity wire. [6(a)/E- 3]

S & F of PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [7/E-16] 20 mm size

25 mm size

Making up to 50 mm dia holes on 125 mm depth RCC ceiling. [9(b)/E-3]

S & F of sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. 100 mm x 100 mm x 65 mm. [11(a)/E-4]

150 mm x 100 mm x 65 mm. [11(b)/E-4]

175 mm x 100 mm x 65 mm. [11(c)/E-4]

Supplying and Drawing 1.1 KV Gr. single core stranded 'FR' PVC insulated & unsheathed stranded copper wire (Make - Finolex / Polycab / Havells) of the following sizes in the pre-laid polythene pipe as per GS. 3 x 1.5 sq. mm [1(b)/E-9]

2 x 2.5 sq. mm + 1 x 1.5 sq. mm. [1(s)/E-9]

2 x 4 sq. mm + 1 x 2.5 sq. mm. [1(v)/E-9]

2 x 6 sq. mm + 1 x 4 sq. mm. [1(y)/E- 9]

4 x 16 sq. mm + 2 x 10 sq. mm [1(g1)/E- 9]

S & F of bakelite/perspex top cover on existing inspection box by brass screws- 100 mm x 100 mm x 65 mm. [13(a)/E-5]

150 mm x 100 mm x 65 mm. [13(b)/E-5]

175 mm x 100 mm x 65 mm. [13(c)/E-5]

Finishing of the following PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets and tapes. [9/F-5] 2 x 2.5 sq. mm + 1 x 1.5 sq. mm

2 x 4 sq. mm + 1 x 2.5 sq. mm

2 x 6 sq. mm + 1 x 4 sq. mm

4 x 16 sq. mm + 2 x 10 sq. mm

Supply and delivery of the following sizes 1.1 kV Gr. 4 Core 50 sq. mm PVC/XLPE Insulated & Sheathed Armoured Aluminium Conductor Cable (Make - Polycab/Havells/Universal / RR Kabel)

S & F of perforated 300 mm x 50 mm x 1.25 mm (18 SWG) GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6 mm dia MS suspender, bolts & nuts, steel fastener etc. as required incl. Al painting (two coats) of MS support with 25 mm x 25 mm x 3 mm angle iron support. [34(a)(ii)/D-14]

Laying of 4 core 50 sq. mm cables after cutting floor/pavement/wall and making holes including embedding the cable at an average depth of 75 mm in floor/pavement / wall and mending well the damages to original finish incl. removing the rubbish. [5(ii)/F-3]

Laying of 4 core 50 sq. mm cable Ar. Al. the cable on the wall/surface incl. S & F MS saddles/clamps with earthing attachment in 2 x 10 SWG GI (Hot-Dip) wire, making holes etc. as necy. mending good damages and painting. [2(c)/F-1]

Laying of 4 core 50 sq. mm cable on existing Cable Tray and binding with suitable size GI wire. [6(i)/F-3]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of 4 core 50 sq. mm XLPE/PVÇ Armoured cables. [7(b)/F-4]

Finishing the end of 4 core 50 sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. [8(b)/F-5]

Supply of 240 V, 1200 mm (48") sweep AC Ceiling fan [Make - Crompton Riviera High Speed / Usha Striker Plus / Orient Energy Star, Colour - Brown] complete with all accessories but without regulator.

Supply of 240 V, 18" (450 mm) dia whole metal body and metal blade (4 blade) industrial type wall bracket fan (Make - EPC Electrical Pvt. Ltd.). NS

Supply of 240 V, 16" (400 mm) dia whole metal body and metal blade industrial type wall bracket fan (Make - EPC/Orient/Crompton). NS

Supply of 240 V, 18" (450 mm) dia whole metal body and metal blade (4 blade) Air-Circulator Pedestal Fan complete with all accessories such as Regulator, Cord and 3-pin Top (Make - EPC Electrical Pvt. Ltd., Heavy Duty/USHA/Crompton).

Supply of 240 V, 1420 RPM, 300 mm (12") dia A. C. Exhaust Fan (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty).

Supply of 240 V, 1370 RPM, 225 mm (9") dia A. C. Exhaust Fan (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty).

Supply of box type, 4 ft. long, single T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 1 x T-LED 22 W / Crompton, Cat No. IGP161 LT8-16/Wipro, Cat No. WIO912208]. [NS]

Supply of box type, 4 ft. long, twin T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 2 x T-LED 22 W / Crompton, Cat No. IGP162 LT8-16/Wipro, Cat No. WIO922208]. [NS]

Supply of 4 ft. long 18/20 Watt, polycarbonate LED T-8 lamp (Make - Philips Master LED tube model no. 18W 865 T8 I 2100 lm / Wipro, Cat No. LL13-181-65SESL / Crompton cat no. LTT8-20]. [NS]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F 3x1.5 sq. mm PVC insulated copper wire up to 30 cm and making necessary connection as required by. [21(a)/C-3]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. [29/C-4]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12"). [28(b)/C-4]

Supplying and fixing Al. louver shutter for following exhaust fan on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 30 cm (12") Exhaust fan. [32(a)/D-4]

23 cm (9") Exhaust fan. [32(a)/D-4]

Fixing only single/twin LED light fitting complete with all accessories directly on wall/ceiling by “Z” type (50+25+50) mm (length) x 25 mm (width) x 3 mm (thick) MS clamp whose one side fixed on wall/ceiling by 4 nos. fastener & other side with the fitting by 4 nos. nut-bolt and making connection by PVC insulated stranded copper wire (3 x 1.5 sq. mm up to 1 mt. length through the polythene pipe) with mending good damages to original finish incl. S&F the necessary fixing materials. NS

Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 nos. 20 mm dia EI conduit (16 SWG) supports fixed with “L” type (65 +75) mm (length) x 25 mm (width) x 3 mm (thick) MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size 4 nos nut-bolt and making connection by PVC insulated stranded copper wire (3 x 1.5 sq. mm up to 1 mt. length through the polythene pipe) with mending good damages to original finish incl. S&F the fixing materials, panting etc as required. NS

Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil. [1(a)/G-1]

Earthing with 50 mm dia GI pipe (Tata Medium), 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. [2(a)/G-1]

S & F of earth bus bar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [4(b)/G-2]

Connecting the equipment body to earth bus bar including S&F 25 mm x 6 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipment incl. drilling holes, with bolts, nuts, washers etc. [5(d)/G-3]

Connecting the equipment body to earth bus bar including S&F 20 mm x 3 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipment incl. drilling holes, with bolts, nuts, washers etc. [5(c)/G-3]

Connecting the equipment to earth bus bar including S & F 4 SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [5(a)(i)/G-2)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Stranded GI wire:7/14 SWG [5(b)/G-2].

MALLICK ENTERPRISE (BID ID -5660404)

BARAI ENTERPRISE (BID ID -5660344)