Renovation of Visiting Officer Flats, SIDBI, Ahmedabad

S.NO DESCRIPTION DSR AMOUNT NS AMOUNT

1 CIVIL & ALLIED WORKS ₹ 2,021,561.17 ₹ 871,468.00

2 PLUMBING FIXTURES WORKS ₹ 767,590.00

3 ELECTRICAL & ALLIED WORKS ₹ 410,258.74 ₹ 0.00

4 ELECTRCAL FIXTURE WORKS ₹ 339,232.00

6 GRAND TOTAL Rs with GST ₹ 4,410,109.91

6 GRAND TOTAL Rs with GST ₹ 4,410,109.91

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

1.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 3.00 1123.8 3371.40

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer

work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse

3 8.1 sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an

admixture of pigment to match the marble shade (To be secured to the backing by means of cramps,

which shall be paid for separately)

3.1 8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch

ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete

4.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine

polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform,

6 8.5 vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar No. 2.00 978.7 1957.40

taps etc. including moulding, rubbing and polishing of cut edges etc. complete

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of

7 9.27 aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory

windows with hinges and necessary screws :

7.1 9.27.2 30 mm thick shutters

7.1.1 9.27.2.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood Sqm 40.00 4326.8 173072.00

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including

fixing with necessary screws etc. complete.

8.1 9.114.1 Triple strip vertical type No. 18.00 52.5 945.00

Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer

particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having

10 9.129 one side decorative lamination and other side balancing lamination including IInd class teak wood Sqm 24.00 2307.35 55376.40

lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano

hinges complete as per direction of the Engineer-in-Charge

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer using structural steel etc. as required.

11.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 120.00 172.60 20712.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary

11.2 10.28 accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of Kg 100.00 772.40 77240.00

the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Providing and laying anti skid floor tiles of size 600x600 mm(thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White,

12 11.41A.3.1 Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Sqm 75.00 1464.55 109841.25

jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and

matching pigment etc.,., complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand

& manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement

and matching pigments etc. The tiles must be cut with

the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

11.41A.2 Glazed vitrified floor tiles polished finish of size

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand

& manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

14 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement

and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying

of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system

and rubber mallet for placing the tiles gently and easily.

14.1 11.41A.1 Double charge vitrified tile polished finish of size

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of

floor tiles and jointing with grey cement slurry @ 3.3kg/sqm

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile

adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of

17 11.48 organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including

filling/grouting and finishing complete as per direction of Engineer-in-charge.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV

22 13.48 resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required

shade (Company Depot Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/10 sqm. Over and including priming coat of

exterior primer applied @ 0.90 litre/10 sqm.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand

papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give

an even shade :

28.1 13.99.1 One or more coats on old work. Sqm 21 102.8 2158.80

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden

shade texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd

coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with water to remove excess

sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with

special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to

dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine

polish is applied with compressor pressure spray gun using melamine clear polish and melamine

thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Finalo coat to

be done in 1 or 2 layers without gap of time.)

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and

34 14.81 fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per No. 6.00 288.1 1728.60

direction of Engineer-in-charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as

per directions of Engineer-in- Charge.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as

per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall m 46.00 3.25 149.50

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door

38 14.85 shutters to existing door frames, including replacement of hinges with screws, etc. as required, all No. 10.00 429.1 4291.00

complete as per the direction of the Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead :

43.1 15.12.2 Of area beyond 3 sq. metres No. 50.00 502.75 25137.50

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead

44.2 15.17.2 Channels, angles, tees and flats Kg 250.00 2.3 575.00

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

45.1 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 100.00 73.4 7340.00

45.2 15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 152.00 113.35 17229.20

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful

materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

49 15.60 mechanical means, including loading, transporting, unloading to approved municipal dumping ground Cum 50.00 263.95 13197.50

or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular

plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineer-in-charge.

54 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

54.1 17.28.1 Semi rigid pipe

55 17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

55.1 17.69.1 Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. No. 5.00 115.3 576.50

55.2 17.69.2 Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. No. 2.00 122.4 244.80

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at

53 18.8 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.

53.1 18.8.1 15 mm nominal outer dia .Pipes. m 25.00 497.8 12445.00

53.2 18.8.2 20 mm nominal outer dia .Pipes. m 25.00 537.6 13440.00

53.3 18.8.3 25 mm nominal outer dia .Pipes. m 12.00 627.25 7527.00

53.4 18.8.4 32 mm nominal outer dia .Pipes. m 12.00 739.3 8871.60

54 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and making cast in-situ100mm wide POP Cornice of approved design at the junction of

55 NS ceiling & walls including POP putty and screws etc all complete as directed by rmt 180.00 295.00 53100.00

Banks Engineer as required at site.

Providing and making cast in situ pop false ceiling with required g.i frame work ,g.i mesh and

56 NS finishing of same with pop in layers to Sqm 30.00 2950.00 88500.00

achieve proper level /finishing as per site requirement all complete.

Providing and applying pop punning on wall 5 mm thick in proper line and level with required

material ,t&p , labour etc. all complete

Supplying and fixing SS Curtain rod on door and windows with required SS bracket. Rate also

include s/f end funnels /cap of approve design as per site requirement

Supply & fixing of 18 mm HDMR ply of size 1500 mm X 1200 mm having set top box holder size 1200

mm X 200 mm placed 100 mm from TV unit. All side with with 2mm laminate of approved colour &

provision of 6/16 Amp socket at top , Tv cable with switch plate. Two number of 6/16 Amp socket with

one control switch above set top box point as per site condition

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying :

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @

0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @

0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48

(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry.)

71 NS MODULAR KITCHEN WORK

Providing and fixing modular kitchen units for the kitchen platform and top wall units to be

fabricated by using HDHMR board of thickness 18 mm for making cabinets of required sizes to

match with the sizes SS kitchen jali units and size of the SS sink as per following details :-

Front bottom , top sides and shelf partitions of the modular cabinets shall be of 18 mm thick

HDHMR boards of Mls Green panel Industries or approved equivalent and back portion shall

be of 8 mm thick HDHMR board or approved equivalent with necessary fittings , screws , pasting

materials, finishing all exposed cut surfaces with self adhesive PVC tape in matching shade as that of

laminate . The shutters and the pull out units shall be fixed 50 mm above the kitchen floor level .

All the inner portions of the cabinets shall be finished with 0.8 mm thick laminate of white colour

and approve make..The front face of the cabinet shall be finished with1.0 mm ultra gloss

laminate shade 21162 MR+ & 21069 MR+ Merino make The fittings like handles , telescopic

channels SS baskets , auto closing hinges shall be paid separately under respective items

below . Quoted rates shall be inclusive of labour , materials wastage scaffolding fixing

arrangements of top and bottom units with necessary dash fasteners , repairing the damages,

shifting the debris out of colony , CP , taxes etc all as required for the execution of the work . Note :-

Only front elevation area shall be measured for payment purpose.

a. Below platform units of depth 610 mm approx , Sqm 6.80 29500.00 200600.00

b Top wall units of depth 300 mm approx. with shelves Sqm 6.80 21240.00 144432.00

Providing and fixing stainless steel baskets and other fittings , accesories of modular kitchen of Mls

Hettich or approved equivalent make as per below mentioned details :-

a SS 304 cutlery baskets 15 x20 x4 inch Each 2.00 2950.00 5900.00

b, SS 304 Plain basket 15 x20 x6 inch Each 2.00 3540.00 7080.00

c SS 304 thali basket 15 x20 x8 inch Each 2.00 5310.00 10620.00

d SS 304 plain baskets 19 x20 x4 inch Each 5.00 3540.00 17700.00

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Unit Qty Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

e SS 304 plain basket 19 x20 x 6 inch Each 2.00 4130.00 8260.00

f SS 304 plain basket 19x 20 x8 inch Each 3.00 4720.00 14160.00

g SS baskets S —Corner basket Each 2.00 9440.00 18880.00

h SS detergent pullout Each 2.00 2360.00 4720.00

i SSdustbin ring Each 2.00 1770.00 3540.00

j Bottle Pull out basket set of width 9" with standard depth pair 2.00 8850.00 17700.00

k SS Handle 12 inch size Basic price 400 No 20.00 590.00 11800.00

l SS auto close hinges soft close of all variety of Hettich or approved make pair 17.00 708.00 12036.00

m telescopic channels 20 " size Hettich pair 20.00 885.00 17700.00

n S/F Chimney 600 mm wide Zenith model Faber make with vent pipe Basic price 22500 Each 2.00 29500.00 59000.00

S/F granite kitchen sink 36 x18 x8 with drain board Emarald black model Hindware make

Basic price 13500

Removing the existing plumbing fixtures carefully and stacking the reusable fixture at safe/designated

place, including dicardeding the unusable fixture after approval from Engineer In Charge

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire

9.147D.2 mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness Sqm 30 12,254.90 367647.00

of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series)

9.147A.1 frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane Sqm 15 10,993.95 164909.25

glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

MULTIPLYING FACTOR FOR labour cess 0.973 1962680.743

COST INDEX @ 103 2021561.165

Grand Total of Civil Works 2021561.17 871468.00

Grand Total of Civil Works 2021561.17 871468.00

Digitally signed by AMIT

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Supplying and fixing looking mirror of 5 mm thick looking glass with bevelled

edges and holes as per site requirement of Modi Gaurd or other approved equivalent

B/1 Rates are inclusive of fixing of glass with SS stud all complete as directed by Sqft 25.00 354.00 8850.00

Engineer Incharge

Providing and fixing in position quality Towel rod of 24" length with brackets fixed

B/2 over tiles with rowel plug and approved quality screws including cutting and Each 5.00 1652.00 8260.00

making good the tiles.

Providing and fixing in position quality Towel ring fixed over tiles with rowel

plug and approved quality screws including cutting and making good the

B/3 damages of tiles etc. all complete as required at site as directed by the Engineer-in- Each 5.00 1475.00 7375.00

Providing and fixing in position Chlorinated Poly Vinyl Chloride (CPVC) pipe SD-

11 of approved make in desired thickness having thermal stability for hot and cold

water supply of including all CPVC plain & brass threaded approved fittings and

fixing the pipe with clamps & screws as per the site requirements

at 1.00 meter C/C etc. all complete.

(a) 20mm nominal dia Rmt 30.00 472.00 14160.00

(b) 40 mm Nominal dia Rmt 20.00 590.00 11800.00

c) 65 mm dia pvc pipe with fitting Rmt 10.00 590.00 5900.00

d)15. mm dia brass ball valve in kitchen + toilets No. 5.00 1180.00 5900.00

Supplying and fixing position the following approved make fittings & fixtures,

B/5 including carefully removing the existing old/damaged fittings & fixtures and

handing over the same

15mm dia. C.P. Brass Pillar Cock with CP

(i) flange of continental series of approved equivalent make. Each 5.00 1239.00 6195.00

15 mm dia. C.P. Brass bib cock with nozzle wall CP. flange of approved equivalent

15 mm dia. C.P angle valve with wall CP. flange of continental series of

approved equivalent make.

Digitally signed by AMIT

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

15 mm dia. C.P. Brass central hole single lever wash basin mixer of approved

(iv) equivalent make including plumbing fittings and 450 mm long braided hoses etc. Each 5.00 4720.00 23600.00

all complete as required at site.

15 mm dia. C.P. 4 way high flow single lever divertor with cover plate ,c.p pin .

(v) Including all plumbing fittings& fixtures etc all complete as required at site as Each 5.00 7670.00 38350.00

directed by ENGINEER IN CHARGE

15 mm dia C.P spout of approve design with C.P Handshower and c.p flexible

tube of required length

(vii) C.P Overhead shower 150 X150 mm with 450 mm long C.P Shower Arm J No. 5.00 6844.00 34220.00

100mm dia. Heavy quality stainless steel Jali (grating) with or without holes for

(viii) waste pipe of floor / Nahani trap etc all complete as required at site as directed by Each 15.00 177.00 2655.00

Engineer In charge

(ix) Heavy quality CP Soap dish of approved equivalent make. Each 5.00 1062.00 5310.00

15 mm dia .C.P brass two way bib cock with hand shower (health faucet) with flange

(x) of Jaquar or approved equivalent make etc all complete as required at site as Each 5.00 5310.00 26550.00

directed by the Engineer-in-Charge.

(xi) 15 mm dia. C.P brass conceled stop cock with upper body plate Each 5.00 2124.00 10620.00

Providing and fixing glass shelf of including bracket etc. all complete as directed by

ENGINEER IN CHARGE.

(xiii) Providing and fixing table mounted sink mixture Each 5.00 7080.00 35400.00

xiv S/F 450 mm long pvc connection Each 40.00 177.00 7080.00

Providing & fixing in position 1st quality vitreous china glazed wall mounted

European WC of standard size with either P trap as per site requirement and

providing & fixing conceled cistern with required material ,labour etc i/c cover plate

all complete Model Enigma Hindware

Same as above but using extended wall mounted model with cistern

complete set Model Enigma with cistern Hindware

Providing and fixing in position 100 mm dia. and 75mm outlet pvc Nahani/ floor

trap having seal of 40 mm to 50mm, approved equivalent ISI mark having necessary

B/7 length of extension pipe wherever required including cutting of concrete and Each 10.00 885.00 8850.00

repairing with concrete after completion all complete.

Digitally signed by AMIT

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Supplying and fixing table top square washbasin 40x40 cm of with c.p waste

B/8 coupling and heavy duty waste pipe all complete as required at site as directed Each 5.00 8850.00 44250.00

by Engineer-in-Charge

Carefully removing the existing wash basin along with all accessories & fixing of 1st

quality centre hole white vitreous wash hand basin of size: 550 mm x 400 mm [approx.]

of approved equivalent make with a pair of C.I. / M.S brackets, 32mm dia C.P. waste

B/9 coupling of premium quality, connections pipes ,waste pipe etc including providing Each 5.00 4130.00 20650.00

and fixing in position the required length 40 mm diameter CPVC waste pipe upto

existing Nahani Trap etc all complete as required

Fabricating ,supplying and fixing Vanity of required size approx 30 x 20 inch

made up of 18 mm HDHMR board ,.8 mm laminate on all internal faces and 1.0mm

on shutter with auto closing hinges and fixing of same with fastner etc. Rate are

inclusive of s/f galaxy black granite on top of vanity and making of

moulding all complete.

Total Rs. 767590.00

Digitally signed by AMIT

ELECTRICAL & ALLIED WORKS

S.No. 2022EM Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs)

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

1 1.10 conduit, with modular switch, modular plate, suitable Gl box

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable Gl box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable

etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 1.12 recessed medium class PVC conduit along with 1 No. 4 sq. mm 250.00 Metre 334.00 83500.00

FRLS PVC insulated copper conductor single core cable for loop

earthing as required.

Wiring for circuit/ submain wiring along with earth wire with

the following sizes of FRLS PVC insulated copper conductor,

single core cable in surface/ recessed medium class PVC conduit

1.14.2 2 X2.5 sq. mm + 1X2.5 sq. mm earth wire 125.00 Metre 275.00 34375.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 70.00 Metre 334.00 23380.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 35.00 Metre 439.00 15365.00

1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 25.00 Metre 570.00 14250.00

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

Digitally signed by AMIT

ELECTRICAL & ALLIED WORKS

S.No. 2022EM Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

9 1.19 copper braid and protected with PVC sheath in the existing 100.00 Metre 47.00 4700.00

surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along

with accessories in surface/recess including painting in case of

10 1.20 surface conduit, or cutting the wall and making good the same

in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular

switch, connections etc. as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

13 1.32 fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A 15.00 No. 586.00 8790.00

modular switch, connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, V,

complete as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

15 1.51 existing surface/ recessed Steel/ PVC conduit as required.

Digitally signed by AMIT

ELECTRICAL & ALLIED WORKS

S.No. 2022EM Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs)

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

16 1.55 conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A

modular switch, connections etc. as required. (For light plugs to

be used in non residential buildings).

Supplying & fixing suitable size Gl box with modular plate and

cover in fronton surface or in recess including providing and

17 1.57 fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" 10.00 No. 727.00 7270.00

curve including connections, painting etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/lsolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

19 2.10.1 following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Digitally signed by AMIT

ELECTRICAL & ALLIED WORKS

S.No. 2022EM Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs)

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

20 2.15 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Total Rs 396542.00

MULTIPLYING FACTOR FOR 18 % GST 0.973 410258.7447

Grand Total of Civil Works 410258.74

Grand Total of Civil Works 410258.74

Digitally signed by AMIT

ELECTRICAL FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Dismantling Carefully disconnection and removing all fans, fittings, decorative lights,

water purifier, geysers, wires, conduits, casing capping , switch boards/ DB etc. in flat

and keeping reusable items like exhaust fans ceiling/wall fans, LED batten

water purifier, geyser etc.

Supplying ,Fixing, testing and commissioning of following Electrical items with

necessary hardware

SITC of LED tube light fixture of 4’ length 36 Watt white colour LED tube light on

new white colour square PVC block and using two/three core copper conductor

PVC insulated preferably white colourcable from tube light fixture to ceiling rose as

directed by Engineer In Charge.

SITC of 48 inch BLDC Ceiling fan of approve shade with all necessary mounting

B accessories with step regulator To provide 3 mm thick Bakelite round plate with No 10.00 2950.00 29500.00

required hardware near the ceiling fan hook.

PVC exhaust fan of 200MM size with pvc louver protection complete with

required fittings and hardware etc. and using two/three core copper conductor

PVC insulated preferably white colourcable from exhaust fan to ceiling rose as

directed by Engineer In Charge.

SITC of 25 litre horizontal/vertical geyser i/c all necessary hardware material etc .all

3 3 litre instant geyser No 1.00 4500.00 4500.00

SITC of 15 watt LED panel light at entrance, balconies and kitchen both surface and

conceled type i/c connection and testing complete.

SITC OF 18/20 Watt LED light on ceiling with required hardware material all

complete (Dinning room)

C SITC of cabin fan 12 inch size on ceiling bwith required materia No 2.00 2950.00 5900.00

4 SITC of fancy fittings of approve make No 14.00 5900.00 82600.00

5 LED tube light

6 10 Watt 2 ft led fitting, White Colour No 4.00 354.00 1416.00

Copper piping along with insulation, Drain Pipe up to 32 dia along with insulation and

power cable 3 crore 4 sqmm suitable for 2 Tr Split ACs to be installed .

Total Rs 339232.00

Digitally signed by AMIT