Supply and Installation of Gym Equipment, and Furniture Works at Various Sports Complexes under the Sports Authority of Gujarat. 1. TSC- Pavijetpur, Dist. Chhotaudepur, 2. DSC- Chhotaudepur 3. TSC- Olpad, Dist. Surat

In Figure In Words

1 Supply, Installation, Testing, Commissioning, Transportation of Commercial Motorized Treadmill having 6.00 Nos 2,05,701.65 Rupees Two Lakh Five Thousand

1) Machine have heavy duty AC motor Minimum 4HP continuos duty or more(Min 4 year warranty) Seven Hundred One and Sixty-Five

2) Should have low start up Speed : 1kmh or lesser Paise Only

3) Should have Incline increments of 1% or lesser

4) Low step height : 10" or lower

5) Speed Range : 0-18 Kmh or higher

6) Incline : 0-12 or more

7) Programmes: 10 or more

8) Running Surface - Width: 60"x 23” or more

9) Machine should have audio/vedio playback options

10) Max. User weight: 180 Kg. or more

11) Display: 7-inch LCD smart Screen with feedback for steps incline, pulse, Calories, Distance, Time, Speed, Calories, Heart Rate

12) Must have dedicated display for current speed and current incline in addition to smart screen

13) Product should have EN-957 or ASTM certification for stationary fitness equipment.

14) Must have atleast 5 points of adjustable cushioning for variation in training

• Must have dedicated buttons to control media including track change and volume up down

• Must have at least 3 dedicated keys 4 quick speed increase

• Must have separate central console for atleast incline speed start and stop an other essential controls

• Control for toggling between different screens and functionalities brightness of the screen must be adjustable

• Machine must have virtual running feature with different settings at least of 3 types,

etc. complete as directed by Engineer-in-charge.

2 Supply, Installation, Testing, Commissioning, Transportation of Commercial Cross Trainer (Elliptical Trainer) of self-powered generator type (no external power required during operation), 2.00 Nos 1,39,263.85 Rupees One Lakh Thirty-Nine

equipped with electromagnetic resistance system having Thousand Two Hundred Sixty-Three

1)Machine should have rear wheel design for heavy duty commercial use and Eighty-Five Paise Only

2) Should have minimum resistance level of

3) Machine Weight Atleast 115kg

4) Max User Weight: 180 kg or more

5) Stride Length Atleast 20 of more

6) Step Up Height: 10 or more

7) Should have atleast 7 pre programmed protocols with option for heart rate range control

(8) Machine should have audio/video playback options

9) Display: 7-inch LCD screen with feedback for Time, Distance, RPM (speed), speed, level (number of resistance band) calories, pulse and watts

10) Product should have EN-957 or ASTM Certification for stationary fitness equipemnt.

11) Must have atleast 3 points of adjustable cushioning for variation in training

• Must have dedicated buttons to control media including track change and volume up down

• Control for toggling between different screens and functionalities brightness of the screen must be adjustable

• Machine must have virtual running feature with different settings at least of 3 types and shall be complete with onsite installation, testing, commissioning, calibration, demonstration and

training of staff, etc. complete as directed by Engineer-in-charge.

3 Supply, Installation, Testing, Commissioning, Transportation of Commercial Spin Bike 2.00 Nos 61,327.20 Rupees Sixty One Thousand Three

1) Must have Belt Direct Drive System Hundred Twenty Seven and Twenty

2) Must have Adjustable pedal straps / anti skid pedals. Paise Only

3) Max. User Weight: 125 Kgs. or more.

4)Must have a machine weight of 45 Kg or more

5) Must have Vertical / horizontal adjustments for the handles and seat

6) Must have a fly wheel weight of 24Kg or more

7) Machine Dimension: Atleast (LxWxH): 40" x 23"x 43"or more.

8) Product should have EN-957 or ASTM certification for stationary fitness equipment. and shall be complete with onsite installation, testing, commissioning, calibration, demonstration and

training of staff, etc. complete as directed by Engineer-in-charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

4 Supply, Installation, Testing, Commissioning, Transportation of Commercial Rowing Machine (Air Rower) Having 1.00 Nos 1,11,155.55 Rupees One Lakh Eleven Thousand

1) Console Feedback :strokes per minute, distance time calories and more. One Hundred Fifty-Five and Fifty-Five

2) Should have foot strap adjustments /anti skid foot platform for stability Paise Only

3) Must have adjustable magnetic resistance and free-flow air resistance

4) At least 10 resistance levels.

5) Machine Weight : Atleast 55 Kgs

6) Product should have EN-957 or ASTM certification for stationary fitness equipment. The equipment shall include all standard accessories, safety provisions, fixtures and fittings, and shall be

complete with onsite installation, testing, commissioning, calibration, demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

5 Supply, Installation, Testing, Commissioning, Transportation of Adjustable Weight Bench having 4.00 Nos 28,108.30 Rupees Twenty Eight Thousand One

1) Tripod Style design for stability Hundred Eight and Thirty Paise Only

2) Machine must weigh atleast 35 kgs or more

3) Product should have EN-957 or ASTM certification for stationary fitness equipment.

4) Heavy duty 9 gauge or better structure

5) Machine Dimensions(L x W x H): Atleast 1300 x 760 x 480 mm or more. The equipment shall include all necessary fittings, fixtures and accessories, and shall be complete with onsite

installation, testing, commissioning, demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

6 Supply, Installation, Testing, Commissioning, Transportation of Functional Trainer (Dual Pulley Machine) having 1.00 Nos 2,08,256.95 Rupees Two Lakh Eight Thousand

1) Machine should have 2 weight stacks of 100 kg each or more Two Hundred Fifty-Six and Ninety-

2) Must have Instructions Guide during exercise. Five Paise Only

3) Must have 2 x 28 pulley positions offers more workout positions & versatility.

4) Weight stack tower must have magnetic pull pins and designed for heavy duty use with metal shroud covers.

5) Max User Weight: Atleast 180 kg or more,.

6) Machine Dimensions: Atleast L 173 x W 104 x H 238 cm or more.

7) Product should have EN-957 or ASTM certification for stationary fitness equipment.

8) Must have option for using resistance bands along with weight stack.

9) Must have provision for resistance training only without weight.

The machine shall be complete with all fittings, fixtures, fasteners, safety provisions and consumables, and shall include onsite installation, testing, commissioning, alignment, calibration,

demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

7 Supply, Installation, Testing, Commissioning, Transportation of Leg Curl Machine (Seated/Lying Type) with 1.00 Nos 1,32,875.60 Rupees One Lakh Thirty-Two

1) Heavy duty 9 gauge or better structure with atleast 100 kg weight stack Thousand Eight Hundred Seventy-

2) Should have adjustable vinyl cushioned seats with high quality bearings Five and Sixty Paise Only

3) Weight stack tower must have magnetic pull pins and designed for heavy duty use with metal shroud covers.

4) Atleast 5 levels of start point adjustment and calf roller adjustment with spring release

5) Pulley System : Must operate on pulleys with high strength wires for higher tensile strength and balanced weight distribution

6) Product should have EN 957 or ASTM certification for stationary fitness equipment

7) Machine Dimensions: Atleast L 135 x W 114 x H 162 cm or more.

8) Must have option for using resistance bands along with weight stack.

9) Must have provision for resistance training only without weight The machine shall be suitable for user capacity not less than 150 kg.

The unit shall include all standard fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite installation, testing, commissioning, alignment, lubrication, demonstration

and training of staff, etc. complete as directed by Engineer-in-charge.

8 Supply, Installation, Testing, Commissioning, Transportation of Leg Press Machine (Horizontal/Incline Type) having 3.00 Nos 1,32,875.60 Rupees One Lakh Thirty-Two

1) Heavy duty 9 gauge or better structure with atleast 100 kg weight stack Thousand Eight Hundred Seventy-

2) Should have adjustable vinyl cushioned seats with high quality bearings Five and Sixty Paise Only

3) Weight stack tower must have magnetic pull pins and designed for heavy duty use with metal shroud covers.

4) Must have seat adjustments with rubber grip handles

5) Accurate & effective weight resistance to build leg muscles

6) Pulley System : Must operate on pulleys with high strength wires for higher tensile strength and balanced weight distribution

7) Product should have EN 957 or ASTM certification for stationary fitness equipment

8) Machine Dimensions: Atleast L 203 x W 141 x H 162 cm or more.

9) Must have option for using resistance bands along with weight stack.

10) Must have provision for resistance training only without weight

The equipment shall include all standard fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite installation, testing, commissioning, alignment, calibration,

demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

9 Supply, Installation, Testing, Commissioning, Transportation of Adductor / Abductor Machine (Dual Function Type) having 1.00 Nos 1,50,762.70 Rupees One Lakh Fifty Thousand

1) Heavy duty 9 gauge or better structure with atleast 100 kg weight stack Seven Hundred Sixty-Two and

2) Should have long arm rubber grip handles providing multiple grip positions Seventy Paise Only

3) Weight stack tower must have magnetic pull pins and designed for heavy duty use with metal shroud covers.

4) Product should have EN 957 or ASTM certification for stationary fitness equipment

5) Pulley System : Must operate on pulleys with high strength wires for higher tensile strength and balanced weight distribution

6) Machine Dimensions: Atleast L 62" x W 63" x H 60"or more.

7) Must have option for using resistance bands along with weight stack.

8) Must have provision for resistance training only without weight.

The equipment shall include all standard fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite installation, testing, commissioning, alignment, calibration,

demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

10 Supply, Installation, Testing, Commissioning, Transportation of Dumbbell Rack fabricated from heavy-duty high-gauge steel sections (rectangular/oval profile) with 3.00 Nos 60,049.55 Rupees Sixty Thousand Forty-Nine

1) Angled for easy pick up and replacement of dumbbells. and Fifty-Five Paise Only

2) Atleast 2 tiers for multiple sets of round-style dumbbells

3) Product should have EN-957 or ASTM certification for stationary fitness equipment.

4) Heavy duty 9 gauge or better structure

5) Machine Dimensions: Atleast (L x W x H) : 74 x 266 x 87 cm or more.

The equipment shall include all necessary fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite installation, alignment, testing, commissioning, demonstration and

handover, etc. complete as directed by Engineer-in-charge.

11 Supply, Installation, Testing, Commissioning, Transportation of Commercial Recumbent Bike Should Have 1.00 Nos 1,16,266.15 Rupees One Lakh Sixteen Thousand

1) Machine must be self-powered with at least 32 levels of resistance Two Hundred Sixty-Six and Fifteen

2) Display feedback of Heart rate, RPM, Resistance, Time, Distance, Speed, Calories, Mets and more Paise Only

3) Should have pre-programmed protocols for Manual, Interval and Heart Rate Programs etc.

4) Machine must have horizontal 28 levels with 1/2" incremental seat position adjustments.

5) Max. User Weight: 180 Kgs. or more.

6)Should have smart dial control with built-in audio & video

7) Product should have EN-957 or ASTM certification for stationary fitness equipment.

8) Must have atleast 3 points of adjustable cushioning for variation in training

• Must have dedicated buttons to control media including track change and volume up down

• Control for toggling between different screens and functionalities brightness of the screen must be adjustable

• Machine must have virtual running feature with different settings at least of 3 typesThe equipment shall include all standard fittings, fixtures, fasteners, safety provisions and consumables,

and shall be complete with onsite installation, testing, commissioning, calibration, demonstration and training of staff,etc. complete as directed by Engineer-in-charge.

12 Supply, Installation, Testing, Commissioning, Transportation of Commercial Upright Bike equipped with 1.00 Nos 1,07,322.60 Rupees One Lakh Seven Thousand

1) Must have supportive elbow pads/arm rests. Three Hundred Twenty-Two and Sixty

2) Display should have 7-inch LCD screen with feedback for steps, pulse, heart rate, time, speed, distance, calories Paise Only

3) Max. User Weight: 180 Kgs. or more.

4) Should have minimum 28 or more seat adjustment levels

5) Machine should have audio/video playback options

6) Product should have EN-957 or ASTM certification for stationary fitness equipment.

7) Must have atleast 3 points of adjustable cushioning for variation in training

• Must have dedicated buttons to control media including track change and volume up down

• Control for toggling between different screens and functionalities brightness of the screen must be adjustable

• Machine must have virtual running feature with different settings at least of 3 types The equipment shall include all standard fittings, fixtures, fasteners, safety provisions and consumables,

and shall be complete with onsite installation, testing, commissioning, calibration, demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

13 Supply, Installation, Testing, Commissioning, Transportation of Lat Pulldown Machine (Commercial Grade) having 1.00 Nos 1,50,762.70 Rupees One Lakh Fifty Thousand

1) Heavy duty 9 gauge or better structure with atleast 100 kg weight stack Seven Hundred Sixty-Two and

2) Should have adjustable vinyl cushioned seats with high quality bearings Seventy Paise Only

3) Weight stack tower must have magnetic pull pins and designed for heavy duty use with metal shroud covers.

4) Must have thigh adjustment with spring release.

5) Product should have EN 957 or ASTM certification for stationary fitness equipment

6) Pulley System : Must operate on pulleys with high strength wires for higher tensile strength and balanced weight distribution

7) Machine Dimensions: Atleast L 120 x W 90 x H 162 cm or more.

8) Must have option for using resistance bands along with weight stack.

9) Must have provision for resistance training only without weight The equipment shall include all standard fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite

installation, testing, commissioning, alignment, lubrication, calibration, demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

14 Supply, Installation, Testing, Commissioning, Transportation of Leg Extension Machine (Commercial Grade) having 1.00 Nos 1,32,875.60 Rupees One Lakh Thirty-Two

1) Heavy duty 9 gauge or better structure with atleast 100 kg weight stack Thousand Eight Hundred Seventy-

2) Should have back pad adjustments with high quality bearings for varying leg lengths. Five and Sixty Paise Only

3) Weight stack tower must have magnetic pull pins and designed for heavy duty use with metal shroud covers.

4) Product should have EN 957 or ASTM certification for stationary fitness equipment

5) Pulley System : Must operate on pulleys with high strength wires for higher tensile strength and balanced weight distribution

6) Machine Dimensions: Atleast L 120 x W 90 x H 162 cm or more.

7) Must have option for using resistance bands along with weight stack.

8) Must have provision for resistance training only without weight The equipment shall include all standard fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite

installation, testing, commissioning, alignment, lubrication, calibration, demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

15 Supply, Installation, Testing, Commissioning, Transportation of Pec Fly / Rear Deltoid Machine (Dual Function Type) having integrated dual functionality for chest (pec fly) and rear shoulder 1.00 Nos 1,50,762.70 Rupees One Lakh Fifty Thousand

(rear deltoid) exercises, with having Seven Hundred Sixty-Two and

1) Heavy duty 9 gauge or better structure with atleast 100 kg weight stack Seventy Paise Only

2) Should have adjustable vinyl cushioned seats with high quality bearings .

3) Weight stack tower must have magnetic pull pins and designed for heavy duty use with metal shroud covers.

4) Product should have EN 957 or ASTM certification for stationary fitness equipment

5) Pulley System : Must operate on pulleys with high strength wires for higher tensile strength and balanced weight distribution

6) Machine Dimensions: Atleast L 77" x W 35" x H 100"or more.

7) Must have option for using resistance bands along with weight stack.

8) Must have provision for resistance training only without weightThe equipment shall include all standard fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite

installation, testing, commissioning, alignment, calibration, demonstration and training of staff, etc. complete as directed by Engineer-in-charge.

16 Supply, Installation, Testing, Commissioning, Transportation of Rubber Coated Dumbbells Set (Commercial Grade) comprising complete set of paired dumbbells in standard incremental range 2040.00 KG 211.09 Rupees Two Hundred Eleven and

from 2.5 kg to 40 kg, suitable for continuous and heavy-duty usage in commercial gym environments, including 2.5 kg, 5 kg, 7.5 kg, 10 kg, 12.5 kg, 15 kg, 17.5 kg, 20 kg, 22.5 kg, 25 kg, 27.5 kg, Nine Paise Only

30 kg, 32.5 kg, 35 kg, 37.5 kg and 40 kg, with one pair of each weight. total: 16 Pairs (32 Dumbbells), Approx. Total Weight: 680 kg (for full commercial set). The dumbbells shall be of solid cast

iron/steel core construction with high-quality rubber or urethane coating, providing durability, resistance to wear and corrosion, and protection against floor damage and noise during

handling.Each dumbbell shall be provided with ergonomically designed chrome-plated handles (straight or contoured type) with precision knurled anti-slip grip, ensuring firm and secure

handling during exercise. The heads shall be hexagonal or round type (as approved) with anti-roll design, and shall have clearly embossed or laser-marked weight identification on both sides

for easy visibility. The rubber/urethane coating shall be uniform, non-porous, odor-resistant, abrasion-resistant and impact-absorbing, suitable for intensive commercial usage without cracking

or peeling. The complete set shall be compatible with and properly arranged on the approved heavy-duty dumbbell rack provided under this BOQ, ensuring systematic storage and efficient

space utilization. The equipment shall include all necessary accessories, fittings and handling provisions, and shall be complete with onsite delivery, positioning, checking, demonstration and

handover, etc. complete as directed by Engineer-in-charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

17 Supply, Installation, Testing, Commissioning, Transportation of Full Body Exercise Cycle / Air Bike (Commercial Grade) having fan-based air resistance system, where resistance is directly 2.00 Nos 1,03,489.65 Rupees One Lakh Three Thousand

proportional to user effort, suitable for high-intensity interval training (HIIT) and continuous commercial gym usage. The machine shall be provided with a large diameter steel fan wheel Four Hundred Eighty-Nine and Sixty-

enclosed within a safety protective guard, ensuring smooth airflow resistance and complete user safety during operation. The resistance shall be variable and self-adjusting without manual Five Paise Only

control, increasing progressively based on pedaling and arm movement speed. The unit shall be equipped with a multi-function digital console/display showing parameters such as time,

distance, speed, calories burned, RPM and watts, along with pre-set workout programs, interval training modes and manual mode, facilitating structured training sessions. The equipment shall

feature dual action mechanism with synchronized moving arms and pedals, enabling full-body workout engaging both upper and lower body muscle groups. The bike shall be provided with

ergonomic adjustable seat with vertical and horizontal adjustment, multi-grip handles with non-slip coating, and heavy-duty pedals with adjustable straps ensuring secure and comfortable

operation for users of different physiques. The structure shall be fabricated from heavy-gauge steel frame with anti-corrosive powder coated finish, designed for high durability, stability and

vibration-free performance under intense usage conditions, with user weight capacity not less than 150 kg. The unit shall be provided with integrated transport wheels for easy movement, non-

slip rubber base supports for floor protection, and fully enclosed moving parts ensuring safety during operation. The equipment shall include all standard fittings, fixtures, fasteners, safety

provisions and consumables, and shall be complete with onsite installation, testing, commissioning, calibration, demonstration and training of staff, etc. complete as directed by Engineer-in-

18 Supply, Installation, Testing, Commissioning, Transportation of Olympic Barbell Set (Commercial Grade) comprising minimum total weight of 190 kg or higher, including one Olympic barbell 3.00 Set 76,333.78 Rupees Seventy-Six Thousand Three

and complete set of rubber/urethane coated weight plates, suitable for heavy-duty strength training applications in commercial gym environments. The set shall include Olympic barbell (20 kg Hundred Thirty-Three and Seventy-

approx.) with 50 mm diameter sleeves, made of high tensile alloy steel, chrome plated or hard chrome finished, with knurled grip handles for anti-slip performance, and shall be designed for Eight Paise Only

minimum load capacity of 300 kg or higher. The bar shall be provided with smooth rotating sleeves with high-quality bearings/bushings, ensuring safe and efficient lifting performance. The

weight plates shall consist of rubber coated or urethane coated plates of standard increments, compatible with 50 mm Olympic bar, and shall include the following minimum configuration (or

equivalent approved set achieving total weight):

2.5 kg × 2 Nos.

5 kg × 2 Nos.

10 kg × 2 Nos.

15 kg × 2 Nos.

20 kg × 2 Nos.

25 kg × 2 Nos.

(or equivalent combination to achieve minimum total 190 kg weight including bar)

The plates shall be of solid cast iron/steel core construction with uniform rubber/urethane coating, providing resistance against impact, wear, corrosion and floor damage. Each plate shall have

precision-machined center hole of 50 mm diameter and shall be provided with clear permanently embossed or laser-marked weight identification for easy recognition. The coating shall be

abrasion-resistant, non-porous and odor-free, ensuring long service life without cracking or peeling under continuous heavy usage. The set shall be compatible with the plate tree and barbell

rack provided under this BOQ, ensuring proper storage and handling. The equipment shall include all required accessories such as locking collars/clips (minimum 1 pair) for securing plates

during lifting, and shall include all fittings, fixtures and safety provisions. The entire system shall be complete with onsite delivery, installation, inspection, testing, commissioning,

demonstration and handover, etc. complete as directed by Engineer-in-charge.

19 Supply, Installation, Testing, Commissioning, Transportation of Barbell Rack / Holder for vertical storage of Olympic barbells, fabricated from heavy-duty high-gauge steel sections with robust 3.00 Nos 63,882.50 Rupees Sixty-Three Thousand Eight

welded construction, designed for continuous use in commercial gym environments. The rack shall be designed to accommodate minimum 8–10 Olympic barbells (50 mm diameter sleeves) in Hundred Eighty-Two and Fifty Paise

vertical storage configuration, with individual protected holding slots/tubes lined with high-density plastic/urethane inserts or rubber bushings to prevent damage to barbell sleeves and reduce Only

noise during placement. The structure shall be provided with a wide and reinforced base frame ensuring stability against overturning, and shall be equipped with non-slip rubber foot pads for

floor protection and vibration control. The unit shall have a compact, space-saving design, allowing efficient placement within limited gym area, and shall be suitable for easy access and safe

handling of barbells. All exposed edges and corners shall be smooth finished and rounded, ensuring user safety and eliminating risk of injury during operation. The structure shall be finished

with anti-corrosive powder coating, providing high resistance to wear, impact and corrosion for long service life under indoor gym conditions.The rack shall be designed to withstand heavy

loading conditions with adequate load-bearing capacity, suitable for commercial-grade barbells used in strength training. The equipment shall include all necessary fittings, fixtures, anchors (if

required) and safety provisions, and shall be complete with onsite installation, positioning, testing, demonstration and handover, etc. complete as directed by Engineer-in-charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

20 Supply, Installation, Testing, Commissioning, Transportation of Plate Tree / Weight Stand (Olympic Plate Storage Rack) fabricated from heavy-duty high-gauge steel sections with robust 3.00 Nos 63,882.50 Rupees Sixty-Three Thousand Eight

welded construction, designed for organized storage of weight plates in commercial gym environments.The rack shall be provided with multiple chrome-plated storage horns (minimum 6–8 Hundred Eighty-Two and Fifty Paise

pegs or more as required) compatible with Olympic weight plates of 50 mm diameter, ensuring systematic arrangement of different plate sizes. The storage horns shall be high-strength solid Only

steel rods with chrome plating or equivalent corrosion-resistant coating, designed to withstand heavy loading conditions without bending or deformation. Each horn shall be provided with end

caps or stoppers to prevent accidental slipping of plates. The structure shall be designed with a wide, reinforced base frame ensuring high stability and anti-topple performance, and shall

include non-slip rubber foot pads for floor protection and vibration control during loading and unloading of plates. The rack shall be of compact, space-efficient design, allowing easy access to

plates while optimizing gym floor area usage. All edges and corners shall be properly finished and rounded, ensuring user safety and eliminating risk of injury during handling. The structure

shall be finished with anti-corrosive powder coating, providing resistance to wear, impact and environmental factors for long service life under indoor commercial conditions. The rack shall be

designed to support adequate load-bearing capacity for commercial weight plate sets, ensuring stable and safe storage under full load conditions. The equipment shall include all standard

fittings, fixtures, fasteners and safety provisions, and shall be complete with onsite installation, positioning, testing, demonstration and handover,

etc. complete as directed by Engineer-in-charge.

21 Providing and Fixing Electric Pully Range Setup with all Necessary Fixing as Directed by Engineer-in-Charge. including necessary electrical work and fixtures. Complete as directed by engineer- 15.00 No. 33,480.49 Rupees Thirty-Three Thousand Four

in charge. Hundred Eighty and Forty-Nine Paise

22 Providing wood work in teak wood frames wrought framed and fixed in position with hold fast lugs or dash fasteners of required dia & length (hold fast lugs or dash fastener shall be 3.45 Cmt 1,39,380.00 Rupees One Lakh Thirty-Nine

Incluiding). Thousand Three Hundred Eighty Only

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

23 Providing & Fixing Baffel wall/Ballistic wall of comparising of 38 to 40mm thick Teak wooden planks, Rubber tier sheet & 1mm thick MS sheet as per detailed drawings & required position 69.00 Smt 8,885.98 Rupees Eight Thousand Eight

including all required material and labour for fixing etc. complete. Hundred Eighty-Five and Ninety-Eight

Paise Only

24 Providing, supplying and fixing acoustic wall paneling on vertical surfaces using factory-manufactured polyester fiber (PET) fabric-finish acoustic panels, installed as a complete composite 1647.95 Sqmt 4,141.00 Rupees Four Thousand One Hundred

system, of approved make, as per drawings and directions of Engineer-in-Charge. Forty-One Only

Material & System Specification

Panel thickness: 9–12 mm PET acoustic panels

Density: ≥180 kg/m³

Finish: fabric finish (colour and texture as approved)

Fire rating: Class A or equivalent

Complete Acoustic System

The paneling shall be installed as a full wall acoustic system comprising:

Metal framework (channel/strut system) fixed to wall Acoustic infill layer (polyester fibre infill) within framework Backing substrate board (minimum 10 mm thick) fixed over framework

Exterior PET acoustic panels fixed using approved adhesive/mechanical fixing to achieve overall system thickness of approximately 30 mm. Rate including Framework, acoustic infill, backing

board, and panel fixing complete

Edge trims, jointing, alignment, patterning, and finishing Cut-outs and adjustments for electrical, HVAC, and other services All fasteners, anchors, adhesives, accessories, scaffolding, labour,

T&P, and handling

Complete installation in line, level, and plumb, as per drawings and specifications Acoustic Performance

System NRC: not less than 0.80 (approx. up to 0.85 with full backing system) Suitable for mid and high frequency sound absorption on vertical surfaces Performance Criteria (Space Level) The

acoustic treatment including wall treatment shall be capable of achieving:

Reverberation Time (RT): < 1.0 second

Ambient Noise Level: NC 35 (~40 dBA)

25 Cabin Desk : 2.00 No. 20,907.00 Rupees Twenty Thousand Nine

Providing and Fixing of Office Table 1500mm W X 750mm D X 750mm H Worktop Made from 25 mm Thick Plywood. All the edges are sealed with 2 mm thick PVC edge band all around, Side Hundred Seven Only

Panels Made from 25 mm Thick Plywood. All the edges are sealed with 2 mm thick PVC Edge band on the user side and 1mm on the Top and Bottom Side. The side panels have 2 glide screws

each for leveling of the desk. Modesty Panel Made from 18 mm Thick Plywood. All the edges are sealed with 0.8 mm thick PVC edge band all around Freestanding Pedestal The freestanding

pedestal is made from 18 mm Plywood with a combination of 2mm and 0.8 mm PVC Edge band on all the exposed surfaces as per requirement. The drawers are provided with suitable slides

for smooth operation. All the pedestal drawers are locked with a key. The entire desk unit is assembled with suitable KD fittings and hardware. Each side panel is provided with a cutout for

laying cables for the monitor and other computer accessories . Complete as directed by engineer- in charge.

26 Office Desk 12.00 No. 16,261.00 Rupees Sixteen Thousand Two

Providing and Fixing Workstation with following description Hundred Sixty-One Only

size:- 1200mm(W) x 600mm(D) x 750mm With

TABLE TOP :- 25mm thick E1 grade PLPB table top with PVC edge Banding and aluminum flip up provision of size:- 500mm(W) x135mm(D) only anodized finish.

UNDERSTRUCTURE : Aluminium Powder coated SOLE STRAIGHT / SLANT LEG legs and fixed with die-cast connector which makes asthetic design and MS Powder coated 30x40mm beams are

considered to support table top.

MODESTY :- Below table top MS powder coated metal Modesty of 450H is considered.

WIRE MANAGEMENT : MS-Powder coated wire tray with switch plate and vertical cable raisers / PVC wireguard are considerd for wire management. Complete as directed by engineer- in

27 Visitor Chair 20.00 No. 6,736.70 Rupees Six Thousand Seven Hundred

Thirty-Six and Seventy Paise Only

Providing & Supplying of Fabric finish Visitor Chairs, having single touch adjustable seat of appropriate sizet, , Frame construction should be of nylon & black in color having dimenssion of Seat

Having 761mm(W)X961-1136mm(H)X761mm(D) Backrest Height from Seat: 570±10mm, Backrest Width: 425±10mm. It should have Nylon base Arms, Armrest is T fixed It should have

minimum 5 years warranty. Complete as per instructions given by the Architect & Engineer Incharge & as per shown in the View. Samples should be approved by the Architect & Engineer

Incharge. Please see the Attached Make List for Apporoved Makes Make: Hoff - Model No. Eone, or wipro, Godrej. MEDIUM BACK WITH FABRIC FINISH VISITOR CHAIR WITH FIBER LEG

REVOLVING. Complete as directrd by Engineer in charge

* Alpha Medium PP (Black) Back Chair

* Fabric Upholstered Cushion Seat

* Centre Tilt Mechanism

* Fixed Arms

* Nylon Base

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

28 HIGH BACK CHAIR:- 4.00 No. 18,584.00 Rupees Eighteen Thousand Five

Supply and installation of a HIGH back latherite cushion Chair Overall Dimensions - 680mm(W) x 660mm(D) x 980-1080mm(H), Seat Dimension 520 W x 500 D x 430/530, Back Dimension 520 W Hundred Eighty-Four Only

x 700 H, 550, having cushioned seat and back upholstered with good quality latherite of approved color. The seat and back shall be made of moulded foam with integrated lumber support

having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam. The HR polyurethane

foam shall be moulded with density= 25±2 kg/cu.m.stroke gas lift for seat height adjustment with an adjustment stroke of 100mm., Centre Tilt mechanism with upright position locking, 360-

degree revolution, Tilt tension adjustment, The twin wheel castors shall be injection moulded in Black Nylon 65mm Diameter. The chair shall have PP fixed armrest. etc. complete as directed by

architect and engineer in-charge.

29 RECEPTION TABLE 2.00 No. 32,522.00 Rupees Thirty-Two Thousand Five

Supply and installation Reception Table with MAIN TABLE SIZE: 2400mm W X 1080mm H X 870 Dmm Hundred Twenty-Two Only

SIDE COMBO STORAGE SIZE: 700mm L X 450mm D X 750mm HT

BACK STORAGE- 400 X 2800 X 750MM

Specificaions:

Table top - Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface provided with machine pressed 2mm thick pvc

edge banding.

Under-structure - MMS powder coated Integrate Legs.

Modesty : Pre Laminated Modesty Panel of 450Ht (300mm above floor)

Wire Management : PVC cable tray for power and data, Switch plate to mount the switches / sockets as per requirement. Vertical wire entry cover with removable metal cover for wire uptake

to PVC Cable Tray from floor and 450mm Aluminium Flip Up for switch access.etc. complete as directed by architect and engineer in-charge.

30 WAITING AREA CHAIR 6.00 Set 8,130.50 Rupees Eight Thousand One Hundred

Thirty and Fifty Paise Only

Supply and installation WAITING SITTING- 3 SEATER: seat shell : the seat shell should be a welded assembly of seat, back and side frame. the seat and back should be made of 0.12±0.013cm thk

cr steel sheet with oblong perforations. they should be welded to side frame of size 3.2±0.05cm x 0.5 ± 0.05 cm thk hr steel. the welded assembly should be powder coated ( dft 40-60 microns ).

the seat has a front water fall edge to provide popliteal clearance for comfortable seating. it also has a buttock support curve that not only provides rear support but also prevents small

children from falling through the gap between seat and back. clean and flat surfaces of seat and back aids in easy maintenance.

seat size : 47.8 cm (w) x 44.6 cm (d) back size : 41.6 cm (w) x 23.0 cm (h) complete as directed by architect and engineer in-charge.

31 Providing and Supplying Arm Chair Which have Size of Dimensions 800(H)mmX 590(W)mmX590(D)mm 35.00 No. 1,161.50 Rupees One Thousand One Hundred

with Suitable Colour. complete as directed by architect and engineer in-charge Sixty-One and Fifty Paise Only

32 Providing and supplying wheelchair as specified specification.It shuld be folding MS powder coated frame with fixed arm and footrest,superior quality spoke wheels with united brackets,seats 4.00 No. 20,907.00 Rupees Twenty Thousand Nine

width 46cms (approx.),Maximum load bearing : 100 kgs(approx.)Net weight of wheelchair:18 kgs(approx.) complete as directed by architect and engineer in-charge Hundred Seven Only

33 Supplying & Installing Storage as specified: Full height storage : Gain Full Height Storage 450mmW main with 450mm Add-on height 2025mm*500D with metal Doors complete as directed by 8.00 No. 24,391.50 Rupees Twenty-Four Thousand Three

architect and engineer in-charge Hundred Ninety-One and Fifty Paise

34 Supply & Installation of Shoe rack with Five Perforated Shelves as per tender specification and as Direcited by Engineer in Charge. Dimension Of reck is 900(L)mmX260(W)mmX900(H)mm. 4.00 No. 11,615.00 Rupees Eleven Thousand Six Hundred

Fifteen Only

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

35 Metal Lockers (4-Tier Unit with Cam Lock) 54.00 Unit 14,141.01 Rupees Fourteen Thousand One

Providing, supplying, installing and commissioning of modular M.S. powder-coated locker units, fabricated from high-quality mild steel sheets with minimum 22 gauge thickness for body and 20 Hundred Forty-One and One Paise

gauge for doors, including internal shelf, partitions, and complete assembly. Only

Each locker unit shall consist of one vertical module having 4 individual lockers stacked one above the other (4-tier arrangement). Multiple such units shall be aligned side-by-side to form the

complete locker bank as per approved drawings and 3D design intent.

Each locker compartment shall be provided with:

Individual cam lock with key for each locker

Ventilation slots for air circulation

Label holder and numbering provision

Smooth finished edges with anti-corrosive treatment

The locker shall be finished in approved colour scheme as per design and 3D views, with the following indicative shades:

RAL 5024 – Pastel Blue (accent panels)

RAL 7024 – Graphite Grey (middle band/panels)

RAL 7044 – Light Grey (main body)

(Colour placement to be strictly as per approved 3D view and sample.)

Typical dimensions (per 4-tier unit): approx. 1830 mm (H) × 380 mm (W) × 450 mm (D) or as per approved make and shop drawings.

The rate shall include:

Base support / skirting

Alignment, fixing and anchoring to floor/wall

All necessary hardware, fittings, fasteners, and accessories

Handling, protection and complete installation

Execution: Complete in all respects as per approved drawings, 3D views, colour scheme, and instructions of Engineer-in-Charge

36 Stainless Steel dustbin 14.00 No. 1,841.23 Rupees One Thousand Eight Hundred

Providing and Supplying High Quality stainless Steel Dustbin 30 Liters capacity Forty-One and Twenty-Three Paise

37 Plactic dustbin Big 6.00 No. 2,613.88 Rupees Two Thousand Six Hundred

Providing and Supplying High Quality Plastic Dustbin-46-50 Liters capacity Thirteen and Eighty-Eight Paise Only

38 Providing and Fixing Analog Wall Clock wit, model Number make Ajanta Orpat - 4047 Print or 4047 or equivalent model Silent Sweep Movement QUARTZ - Wall Clock with following 6.00 No. 1,271.59 Rupees One Thousand Two Hundred

specifications Seventy-One and Fifty-Nine Paise

Material of the frame: Plastic, Material of the transparent face: Glass Only

Power Source- including Battery 1 AA Batteries

Dial Color- White, Case Bezel Material- PLASTIC,Case Color brown

Number of Hands-

Other Dimensions

Height-34 cm,Width-34 cm

Other Features

Material of the frame: Plastic, Material of the transparent face: Glass

Warranty Summary: Warranty is available only on machine (movement)

Warranty Service Type: Change of machine-1 Year

etc. complete as directed by Engineer in-charge and PMC.

39 Providing and fixing of approved quality roller blinds using phifer or equivalent fabric of premium grade, with roller tube, bottom bar leveller made of extruded aluminium alloy an Idler, Insert 82.80 Smt 1,336.23 Rupees One Thousand Three

Type- Brackets, PVC chain etc. all complete at all floor and heights as per approved specification. Roller Tube Control, Clutch, Idler Side by side or single Roller Tube of extruded Aluminium Hundred Thirty-Six and Twenty-Three

38mm inner dia - 41mm outer dia minimum wall thickness of 1.6mm. Roller blind - roller blind fabric should be made up of 35% FibreGlass, 65% PVC, it should have specific low emissivity Paise Only

treatment and lead free with Greenguard gold certification. It should have 3% to 5% openness, fabric thickness should be 0.43 mm, mesh weight approx 400 gms/ sqmtr. It should cut UV rays,

with antimicrobial properties preferably with Microban. The fabirc should be Flame retardant and Lead Free. It should be GreenGuard certified with Gold Standard for low chemical emissions

for indoor use. including all accessories, material, labour,installation etc..and complete the work satisfactorily as per instruction of architect or Engineer-in charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

40 Supply and Installation of High Density Poly Ethylene Stadium seating in Fixed Bucket Construction with Slim Profile size of 19” +/- 0.5” and seat height from Floor should not be more than 4” 180.00 No. 2,979.50 Rupees Two Thousand Nine Hundred

+/- 0.5”. It should be available with the option to fix directly on Civil Made Steps or to be fixed on Floor Mount by Help of suitable Aluminium Ultra High Pressure Die cast Brackets or to be fixed Seventy-Nine and Fifty Paise Only

on Wall of Raiser of Steps by suitable Aluminium Ultra High Pressure Die cast Brackets. Seat construction is comprised of High Density Poly Ethylene Material fastenedsecurely to the metal

structural steel Brackets to the Main Metal Structure. The seat Pan Size should be of 47 cm x 40 cm x 35 cm +/- 1 cm. complete as directed by engineer in charge

41 Providing and fixing beveled 6 mm thick, superior quality, copper-free mirror with bevelled edges of approved make and size, mounted on backing of approved quality plywood sheet and fixed 57.50 Sqmt 6,397.34 Rupees Six Thousand Three Hundred

to wall using mirror adhesive of approved make, including providing and fixing minimum 4 Nos. stainless steel (SS 304 grade) clamps/brackets or as directed by Engineer in-charge and Architect Ninety-Seven and Thirty-Four Paise

as safety support, fixed with wooden plugs, C.P. brass screws and washers to ensure proper holding and preventing accidental falling of mirror; including all materials, labour, tools and tackles, Only

complete as per approved drawings and directions of Engineer-in-Charge

42 Providing And Supply Desk As Specification Given below:- 15.00 Nos 12,195.75 Rupees Twelve Thousand One

Size Of Desk is 1050mm(L)X500mm(W)X600mm(H), Colour of Desk Should be Black/Brown ,Material is Particle- and fibreboard with honeycomb paper filling with Fibreboard with Acrylic paint Hundred Ninety-Five and Seventy-

having Plastic edging, Complete as Directed by Engineer In Charge. Five Paise Only

43 Supply Installation Testing and Commissioning of Storage Rack with Five Perforated Shelves 1000m(L) x 600(W)m x 1900(H)m as per tender specification and as Direcited by Engineer in Charge 8.00 Nos 3,484.50 Rupees Three Thousand Four

Hundred Eighty-Four and Fifty Paise

44 Providing, Supplying, Installation, Testing, Commissioning of Single Line Marking Machine (Field Marking Equipment) suitable for marking straight lines on sports grounds, courts or activity 3.00 Nos 23,810.75 Rupees Twenty Three Thousand Eight

areas, complete with all necessary accessories and fixing arrangements, designed for smooth, uniform and precise application of marking material. Hundred Ten and Seventy Five Paise

The machine shall be manually operated push-type or equivalent, fabricated from heavy-duty mild steel frame with anti-corrosive powder coated or painted finish, ensuring durability and long Only

service life under outdoor conditions.

The unit shall be provided with adjustable marking width mechanism (typically 50 mm to 100 mm or as required), capable of producing sharp, continuous and uniform lines without spillage or

The machine shall be equipped with a marking tank/container made of non-corrosive material (plastic / stainless steel / fibre type) suitable for holding marking material such as lime powder,

chalk powder or liquid paint (as applicable), with controlled dispensing mechanism. The equipment shall be provided with smooth rolling wheels (minimum 2 or 3 wheels configuration)

ensuring easy maneuverability and stability during operation, along with ergonomic handle for pushing and guiding the machine.

The unit shall include adjustable flow control system for marking material, allowing consistent output and minimizing wastage during operation. The machine shall be designed for easy

cleaning, maintenance and refilling, and shall include necessary provisions for safe storage when not in use. The equipment shall include all necessary fittings, fixtures, accessories and fixing

arrangements, complete in all respects, and shall be suitable for immediate use upon installation. The item shall be complete with onsite delivery, assembly, testing, demonstration and

handover, etc. complete as directed by Engineer-in-charge.

45 Providing and fixing 100mm thick partition which includes Gyptech 48mm Stud of 0.50mm thick having one flange of 36mm and another flange of 36mm fixed between 0.50mm thick Gyptech 38.00 Sq.M 2,312.90 Rupees Two Thousand Three

floor channel (25mmx50mmx25mm)& 0.50mm thick deflection head ( 45mmx50mmx45mm) at 456mm c/c distance , the floor channel and deflection head shall be fixed with expansion Hundred Twelve and Ninety Paise

fastners of 8mm dia @ 450mm c/c the stud shall be cut 15mm shorter than sofiit height to make deflection movement in the top. 50mm thick Rockwool insulation of 48kg/m³ density shall be Only

properly inserted between the studs within the partition cavity to provide thermal and acoustic insulation.

Two layer of 12.5mm thick standard Gyptech Gypsum board on both sides shall be screwed with a dry wall screw of 25mmx6mm and 38mmx6mm c/c at 300mm c/c respectively. Finally , the

edges of the Board are to be jointed and finished with Gyptech jointing Compound and fiber tape. etc, complete as per drawing and as directed by engiener in-charge.

46 Providing and fixing frosted glass /Texture Glass of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications 6.00 Sq.M 1,919.00 Rupees One Thousand Nine Hundred

including providing and fixing EPDM quality rubber/silicon sealant/structural sealant of 3M tape on the periphery of the glass as per the required thickness etc. complete a tall Nineteen Only

floors/alllevels/all heights as per the directions of Architect. Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage. etc, completed as per drawings

and design supplied by architect and instruction given by authority and E.I.C.(a) 8 mm thick toughen glass

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

47 Providing, supplying and fixing single shutter cabin door comprising 12 mm thick toughened glass panel with wooden peripheral border of approved hardwood (minimum 75–100 mm / 3–4 8.00 Sq.M 15,150.00 Rupees Fifteen Thousand One

inch width) all around. Hundred Fifty Only

The work shall include providing and fixing wooden frame/border with smooth finish, edge polishing and necessary grooves to hold glass panel, complete with melamine/polish finish.

The door shall include necessary hardware such as hinges/pivots, handle, lock, fasteners and fixtures as required. All joints shall be properly finished and aligned.

The rate shall include all materials, labor, fabrication, polishing, glass fixing, installation and finishing, complete in all respects as per drawings and instructions of Engineer-in-Charge.

48 Supplying Examination Bed as specified: Single Bed, Wooden Ply, CRCA Pipe Frame, Powder Coated, PPCP shoes, min. dimension 2050(L) X 900(B) X 610(H) etc complete as per drawings and 2.00 No. 16,196.36 Rupees Sixteen Thousand One

design supplied by architect and instruction given by authority and Engineer in-charge. Contractor have to approve sample from architect and client before execution. Hundred Ninety Six and Thirty Six

Paise Only

49 Supplying of 4" thick single bed matress made from 40 density u-fom with cotton cloth cover and Quilte cover with all required hardware like chain etc material and labour. 2.00 No. 2,690.64 Rupees Two Thousand Six Hundred

(A) Dual Comfort Mattress- Single | 72" x 34" x 4" | 1.83m x 85 cm x 10.2cm Ninety and Sixty Four Paise Only

50 Supplying and Laying pillow of medium size 20" x 30" as per the instruction and As per approved by Architect and approved by Engineer In-charge. 8.00 No. 408.04 Rupees Four Hundred Eight and Four

Paise Only

51 Supplying and Placing medicine trolley with overall min. dimension: - 902(L) X 532(B) X 915(H) mm. Top shelf & bottom shelf is made of SS304 sheet with 1mm thickness & 1.2mm. Rest of the 2.00 No. 6,060.00 Rupees Six Thousand Sixty Only

components like supporting legs, horizontal bar handle is made of SS 304 pipe having dia 31.8, 12.7 mm respectively. The castors is of high quality plastic injected molded, & the static having

the dia of 125mm.Handles is made of SS 304 pipe having section of 16mm & thickness of 1.2mm. etc.complete as per drawings and design supplied by architect and instruction given by

authority and E.I.C.

52 Providing and Placing stainless steel IV stand made of SS 304 with telescopic height adjustment, 4 hooks, five-leg stable base with castor wheels, complete with all fittings, accessories, 2.00 No. 2,323.00 Rupees Two Thousand Three

transportation, labour, and placing in position Hundred Twenty Three Only

53 Providing and Placing stainless steel stool 24'' made of SS 304 tubular frame with circular SS seat, complete with rubber shoes, all fittings, accessories, labour, transportation and placing in 4.00 No. 3,136.05 Rupees Three Thousand One

position Hundred Thirty Six and Five Paise

54 Supplying and placing of NOTICE BOARD 900(L) X 600(H) Green (SOFT BRD 3 x 2) etc complete as per drawings and design supplied by architect and instruction given by authority and 8.00 No. 6,565.00 Rupees Six Thousand Five Hundred

Engineer in-charge. Contractor have to approve sample from architect and client before execution. Sixty Five Only

55 Providing, laying, fixing, testing and commissioning of point wiring and shifting/modification of switch boards including necessary cutting, chasing, zari work, and making good, incidental work 2.00 job 15,150.00 Rupees Fifteen Thousand One

etc. complete as per drawings and as directed by the Engineer-in-Charge. Hundred Fifty Only

56 Supply and Installation of wall padding to all projected columns of the hall size of 500 x 570 x 500 mm x 1.98-meter height made BY 25 mm 23 density. PU foam on top 50 mm EPE foam over 12 235.75 Sqmt 5,226.75 Rupees Five Thousand Two Hundred

mm thick plywood covered with PVC cloth. including all required material, hardware labor installation etc. complete Twenty Six and Seventy Five Paise

57 Providing and supplying Single bed mattress protector of approved quality, water‑resistant and breathable, fitted type with elastic edges, washable and hygienic, suitable for institutional use, 2.00 No 1,011.01 Rupees One Thousand Eleven and

complete in all respects as per directions of the Engineer‑in‑Charge. One Paise Only

58 Providing and fixing pre-cast Rubber moulded inter locking concrete block 80mm thick with grade of concrete M40 pnumatic compressed by mechanically pressed and as per approved design 100.00 Sqmt 895.13 Rupees Eight Hundred Ninety Five

including 75mm sand layer for levelling and filling the joint with sand in proper line and level etc. complete and including cost of carting of debrises in out side of premises with all lead & lift as and Thirteen Paise Only

directed by engineer in charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

59 Cement Concrete Pavement: Providing and Laying of un-reinforced, dowel jointed, M30 pavement cement concrete pavement over a prepared sub base with 53 grade cement with coarse and 120.00 Cmt 6,551.87 Rupees Six Thousand Five Hundred

fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved approved mix design, transported to site, Fifty One and Eighty Seven Paise Only

laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler,

separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing Compound, finishing to lines.etc complete as per drawing and as

directed by engineer in charge/ PMC.

60 Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and curing complete including cost of form work in (A) Foundation and 107.65 Cmt 3,637.77 Rupees Three Thousand Six Hundred

plinth Thirty Seven and Seventy Seven Paise

61 Providing and laying TMT Bar FE-500D reinforcement for R.C.C. work and bending, binding & placing in position completed upto any floor any level Thermo Mechanical Treated Bars as per I.S. 6900.00 Kg 77.29 Rupees Seventy Seven and Twenty

Standard. ALL FLOOR Nine Paise Only

62 Providing & construction Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant of 4' to 6' height 450.00 Nos 407.03 Rupees Four Hundred Seven and

stack it well, maintain it for 3 month name of plants Neem, Nagor, Avonla, Aritha, Garmala, Neem, Nagor, Avonla, Aritha, Garmala, Neem, Nagor, Avonla, Aritha, Garmala, etc Three Paise Only

completed as dircted by E.I.C/PMC.

63 Ayurvedic shrubbery Clinning the bed, mixing of the fertilizer and pesticides, digging the pit planting the good quality of plant at required distance, maintain it for 3 month name of plants 150.00 Nos 203.01 Rupees Two Hundred Three and One

Tulsi, Brahmi, Aloe vera, Ardusi, Asparagus, Panputti, Nagar vel, Phudina, Ashwagandha, Gugal, Wedellia, Jecomentia, Umbrella palm, etc completed as dircted by E.I.C/PMC. Paise Only

64 Planting of exoitic palm trees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of cow dong and pesticide.planting the following plant of 8' to 10' height stack it well, 150.00 Nos 1,928.09 Rupees One Thousand Nine Hundred

maintain it for 3 month Bottle palm, Coconut, Sopari, Fish tail, Fox tail, Phonix, Date palm, Bismarkia, Shampagon, Latania,etc completed as dircted by E.I.C/PMC. Twenty Eight and Nine Paise Only

65 Planting of Ornamental shurbs Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of cow dong and pesticide.planting the following plant of 8' to 10' height stack it well, 150.00 Nos 203.01 Rupees Two Hundred Three and One

maintain it for 3 month Golden bamboo, Green bamboo, Ficus spp.Ixora spp., Hibiscus spp., Allamanda spp.Bougainvella spp., Nerium spp, Plumeria spp. etc completed as dircted by Paise Only

E.I.C/PMC.

66 Providing pesticides ,dust as directed by architect engineer incharge 900.00 Kg 122.21 Rupees One Hundred Twenty Two

and Twenty One Paise Only

67 Providing pesticides ,liquid as directed by architect engineer incharge. 900.00 liter 709.02 Rupees Seven Hundred Nine and Two

Paise Only

68 Excavation in all types of soil– soft, hard murrum, Dense soil or sand up to a depth of 1.50 m. from existing ground level including sorting out and stacking of useful materials and refilling the 57.60 Cmt 200.16 Rupees Two Hundred and Sixteen

sides of trenches with excavated earth or disposing of the excavated stuff upto all lead as directed by Engineer in-charge Paise Only

Up to 1.5 Mt.Depth

69 Supplying of precast U shape surface Storm Water Drain of FUJI Silvertech or equivalent brand ,having size of 300 mm X 300 mm X 2000 mm long, T-6 load carrying capacity light motor vehicle 170.00 Rmt. 3,473.39 Rupees Three Thousand Four

confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting concrete of M-40 cylinder strength/M-50 cube strength & Fe 500D shall Hundred Seventy Three and Thirty

be used for reinforcement.. The product shall have tie shape groove 10-20 mm width, 25 mm depth as per JIS on both sides of each for jointing two precast units using cement mortar or Nine Paise Only

suitable non shrink grout. The precast U shape storm water drain must consist of special in built insert at appropriate location for fixing De-shackle for mechanical installation , including supply

,transportation on specific location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge.

70 Supplying of factory made FUJI Silvertech or equivalent Precast Lid having size of 500 mm X 410 mm X 60 mm thick, suitable for placing on U - Shape 300 mm X 300 mm, T-6 load carrying 170.00 Rmt. 1,138.27 Rupees One Thousand One Hundred

capacity - (light motor vehicle load) confirming to JIS having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500D shall be used for Thirty Eight and Twenty Seven Paise

reinforcement. The precast Lid should have special arrangement at appropriate location for mechanical/manual installation including supply, transportation, at site in line, level, gradient and Only

plumb with necessary testing commissioning etc. complete as per instruction of engineer in charge.

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

71 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2 Rmt. 1,968.38 Rupees One Thousand Nine Hundred -

watering and laying (to level or slopes) of class NP3 of following internal daimeters.(iii) 600mm dia. Sixty-Eight and Thirty-Eight Paise Only

72 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including 600.00 Rmt. 374.92 Rupees Three Hundred Seventy-Four

excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. and Ninety-Two Paise Only

weeds and fit for mowing including supplying farm clay up 300 mm thick, sludge, manure,pesticides , extra earth, disposal of rubbish, trench excavation and all labour with lead and lift etc. Paise Only

complete as directed by EIC.

Nineteen Paise Only

75 Providing and laying rubble soling, 230 mm thick, in a compact manner,foudation, road, footpath etc. using 200 to 230 mm. cut size stones including filling the gaps with 40mm metal and 13.80 Cmt 2,646.20 Rupees Two Thousand Six Hundred

packing with stone chips with murrum covering and levelling the surface after filling the voids including watering, ramming well and consolidating each layer, as directed by Engineer in-charge Forty-Six and Twenty Paise Only

76 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) including primer to give an required shape even shade after thoroughly brushing the surface to remove all 5237.33 Sqmt 303.66 Rupees Three Hundred Three and

dirt, and remains of loose powdered materials.including primer etc complete Sixty-Six Paise Only

77 Providing and fixing fencing (35 x 35 x 5 MS Angle, Y Type, height 2'6", painted with red oxide or any color 14 Gauge Barbered Wire,600 mm Concertina Coil with all) over compound wall. etc 250.00 Rmt. 871.63 Rupees Eight Hundred Seventy-One

complete. as directed by engineer in-charge. and Sixty-Three Paise Only

78 SECTION 1.00 POINT WIRING 4.00 Nos. 167.66 Rupees One Hundred Sixty Seven and

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of Sixty Six Paise Only

pipe to be erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

79 Point wiring in Copper (Modular) 6.00 Nos. 485.81 Rupees Four Hundred Eighty Five and

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in Eighty One Paise Only

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

80 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of 6.00 Nos. 510.05 Rupees Five Hundred Ten and Five

pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe Paise Only

erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

81 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of 14.00 Nos. 871.63 Rupees Eight Hundred Seventy One

pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe and Sixty Three Paise Only

erected with following type of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

82 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white 6.00 Nos. 257.55 Rupees Two Hundred Fifty Seven and

front plate modules erected on / in wall / ceiling with following type accessories Cat-III Fifty Five Paise Only

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

83 Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules 2.00 Nos. 42.42 Rupees Forty Two and Forty Two

erected with necessary connections as per site situation directed by Engineer In charge. Paise Only

Call bell gong type suitable for 230 volts, 50 c/s. AC supply complete Erected

84 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming BS with necessary end caps Internal 50.00 Mtr. 428.24 Rupees Four Hundred Twenty Eight

and external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following sizes and Twenty Four Paise Only

(2) 100 mm x 50 mm trunking

85 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, 100.00 Mtr. 153.52 Rupees One Hundred Fifty Three and

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size Fifty Two Paise Only

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

86 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm 160.00 Mtr. 112.11 Rupees One Hundred Twelve and

copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (FRLS) Eleven Paise Only

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm (FRLS)

Item No Rate

Quantities estimated

Description of Item (with brief specification and reference to book of specifications) but may be more or Unit Amount

In Figure In Words

87 SECTION 4.00 LIGHT FIXTURE AND FAN 4.00 Nos 1,794.77 Rupees One Thousand Seven

ALL LIGHT FIXTURES SHALL COMPLY TECHNICAL PARAMETERS AS MENTIONED BELOW: Hundred Ninety Four and Seventy

1.The Fixture and driver should be of same make only. Seven Paise Only

2.The manufacture should provided Complete TTC and quality assurance Plan for Fixtures during supply.

3.The Warranty letter for 5years should be provided by the Manufacturer.

4.Fixture should be warrantied for 5yrs for 50,000 hrs @ L70 ( LM79 from NABL accredited Lab to be submitted along with Letter from Manufacturer for the Life class claim of L70 @

5.The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . (Approved Led source Nichia , Cree,

Lumileds , Osram, Bridgelux Only the Invoice copy of the Purchase of Led modules from these manufacturer's need to be submitted).) 6. PF >=0.95 and THD <=10 % ( Certificate need to be

submitted from NABL Accredited lab)

7. The manufacturer should be ISO 9001 -2015 and ISO 14001 -2004 Company 8. The manufacturer should have its own NABL accredited Laboratory & Inhouse Type C Goniometer. 9. The

manufacture should have BIS of all the Lighting products. 10.Dust free air conditioned environment for assembly of LED modules and PCBs 11. Automatic temperature controlled re flow owen

for surface mounted devices 12. Automatic Pick and Place machine for LEDs and electronic components. 13. Environment chamber for life cycle testing of LED lights under different

environmental conditions of ambient temperature (-40 to 100oC) and humidit (upto 95%). Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

24", Surge- 2KV cat-III

88 BRACKET FANS. 2.00 Nos 6,438.75 Rupees Six Thousand Four Hundred

Supplying and erecting approved make double ball bearing oscillating type Heavy duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s wall mounted with height adjustment and rotary Thirty Eight and Seventy Five Paise

tilting device complete with guard, wall bracket,mounting accessories as directed. Only

Total Amount

Total Amount

Rupees Two Crore Fourty Three Lakh Thirty Seven Thousand Two Hundred Thirty Two and Fifty Three Paise Only

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

*Estimated Amount *Estimated Amount

Put On Tender Rs. 2,43,37,232.53 Put On Tender Rs.

Deduct………. % Below Rs. ………………………………. Add ……….. % Above Rs. …………………………..

Net Rs.:……………………………… Total Rs. : ………………………………………

In Words : …………………………………………………. In Words : ………………………………………………….

(* Please strike out whichever is not applicable.)

Note-1 All works shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

GM\Wv! AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALÒ BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Note-2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

GM\WvZ VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL S\8=FS8Z[ 5MTFGL ;CL SZJLP

Note-3 Rates quoted include clearance of site (prior commencement of work and at its close)in all respects and hold good for work under all conditions, site, moisture, weather etc.

[ F NZDF\4 :Y/GL sSFDGF VFZ\E[ VG[ 5]~ YFI T[ JBT[f NZ[S ZLT[ ;FO;}OL SZJFGM ;DFJ[X YFI K[4 VG[ T[ NZ TDFD 5lZl:YlT4 :Y/4 E[H4 CJFDFG JU[Z[ C[9/ SFD DF8[ VD,DF\ ZC[X[P

Note-4 To be continued on additional sheets, if found necessary.

GM\ Wv૪ H~Z H6FI JWFZFGF SFU/M HM0L RF,]\ ZFBJ]\P

`Signature of Contractor with Seal Signature of Contracting Authority with Seal