Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.8 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹50.1 L+₹2.2 L (4.69%)Rejected-AOC | L2 | Rejected-AOC second lowest bidder |
Tender Value
₹45.7 L
EMD Value
₹50,000
Closing Date
26 Aug 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer,Mechanical Division,Irrigation,2nd floor,MiniCivil Station,Alappuzha688013
Construction of sluice gate ( 2 nos) at Padannkari Padasekharam in kumbalagi panchayat, Kochi
2023_Irrig_596983_1
IRR/MH/TR/2124/2023_16_1_1/1
Open Tender
Miscellaneous Works
Item Rate
180 days
Padannakari PatasekharWard 12, Kumbalangi Panchayat
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
₹50,000
16 Oct 2023
19 Aug 2023
1 Sept 2023
19 Aug 2023
26 Aug 2023
19 Aug 2023
19 Aug 2023 - 26 Aug 2023
Amount
Providing ring bund and balling out water
OD104/2023-2024:Putting up ring bund with bottom width 4m, top width 1.5 m and height 4m,side protection with full size coconut posts of length 6m driven at 60cm c/c and 2.00m below ground leveltying with 1/3 split coconut wailing pieces 4 rows on either side, tied with coir yarn and 6mm dia 4m long MScross ties at 2.00m intervals and screening with double new coconut cadjan leaves tied with 1/6th splitbamboo reepers 50cm c/c horizontaly and 100cm c/c vertically and filled with contractors own hard stiff clayey soil cutand conveyed from kayal bed and removing the bund after completion of work etc. complete as perthe direction of departmental officers at site
OD105/2023-2024:Putting up temporary bund with bottom width 5m, top width 3 m and height 5.50 m with full size coconut posts of length 8m driven at 60cm c/c and 2.5m below ground level tying with 1/2 split coconut wailing pieces 4 rows on either side, tied with coir yarn and 6mm dia 5m long MS cross ties at 1.00m intervals and screening with double new coconut cadjan leaves tied with 1/6th split bamboo reepers 50cm c/c horizontaly and 100cm c/c vertically and filled with hard stiff clayey soil cut and conveyed from suitable location and top 20 cm thick gravel and removing the bund after completion of work etc. complete as per the direction of departmental officers at site
OD483/2023-2024:Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection, cost of fuel, lubrication oil, and other stores pay of staff, etc complete
Concrete works
15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Supply, Fabrication and Erection of embedded parts
OD470/2023-2024:Supply of MS rod having diameter less than 12mm including cost of conveyance
OD469/2023-2024:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges.
OD504/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.
85.108:Fabrication , erection and commissioning of Structural Steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charge etc complete but exculding cost of materials already supplied
OD471/2023-2024:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,seal seat etc as per approved specifications, drawings and directions of deptl fficer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete
Supply, fabrication and erection of Materials for shutter
OD18/2023-2024:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges.
OD19/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.
OD466/2023-2024:Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied
85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site
Supply and erection of seal
85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing
85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings
85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings
Supply fabrication and erection of hoisting mechanism and platform
OD531/2023-2024:Supply of screw shaft 75mm outer dia,head pitch 12.7mm root dia 62.3mm using EN 8 shaft including cost of all material,labour,tools etc.complete.
OD530/2023-2024:Providing of Double worm and pinion having cast steel worm wheel 250mm dia 50mm thick with and hub on both sides 150mm dia 75mm thick suitable to 75mm screw rod and a lifting speed of around 5.00 cm/min for hand operation /manual operation including cost of all materials, labour, hire charges and conveyance.
OD541/2023-2024:Supply of Plummer blocks SN511 with self aligning ball bearing 1211K, adapter sleeve H211 and locating rings FRB 11.5/100 (2 nos) for shaft of diameter 50mm.
OD394/2023-2024:Supply of MS plates confirming to IS 2062GrB including the cost of conveyance charges.
OD395/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.
OD542/2023-2024:Supply of MS rod having diameter greater than 12mm including cost of conveyance
OD446/2023-2024:Supply and stacking of GI pipe(32mm dia, 4mm thickness) including cost of all material,labour, conveyance,incidental charges etc complete
85.103:Supply of MS checquered plates including cost of conveyance charges
85.124:Fabrication and supply of Hoisting bride unit in structural steel confirming to IS2062 Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc
85.136:Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied
Supply of rollers
OD450/2023-2024:Supplying and fixing cast steel thrust roller assembly having 250mm Dia, 50mm tread width, SS(304) shaft and 22213E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete
Painting
85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
Supply fabrication and erection of ladder
OD16371/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.
85.124:Fabrication and supply of Hoisting bride unit in structural steel confirming to IS2062 Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc
85.136:Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied
OD16394/2023-2024:Supply and stacking of GI pipe(32mm dia, 4mm thickness) including cost of all material,labour, conveyance,incidental charges etc complete
85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
YEM PEES CONTRACTING
Bidder Name
YEM PEES CONTRACTING
ACCURATE INFRASTRUCTURE
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_886119.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .