Replacement of existing damaged/deteriorated doors with Wood Polymer Composite (WPC) flush doors in Anamudi A block at IISER TVM campus, Vithura

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws and removing tower bolts and handles from existing doors and fixing the same on the WPC doors etc., all as per direction of Engineer-In- Charge. (Note: Including cost of stainless steel butt hinges and necessary S.S screws and including cost of removal of existing doors from rooms, shifting and stacking of the same at ground floor of A block).

30 mm thick

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. 250 x 10 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc 300 x 16 mm

Please Enable Macros to View BoQ information