Miscellaneous Construction and Renovation work at PHC Kumbhari of Barpali block and Talpadar of Bijepur block in the District of Bargarh Odisha under AMA Hospital Phase-II

Total

GENERAL ABSTRACT

CONSTRUCTION & RENOVATION AT KUMBHARI PHC OF BARPALI BLOCK UNDER IMPLEMENTATION OF AMA HOSPITAL PHASE-II IN THE DISTRICT OF BARGARH, ODISHA.

Total

BILL OF QUANTITIES

DISMANTLING WORKS

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete

(a) Ground Floor

(b) First Floor

Dismantling brick or stone masonry in lime or cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

(a) Ground Floor

(b) First Floor

Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

(c) Second Floor

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing R.C.C. columns beams slab staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead.

(a) Ground Floor

(b) First Floor

Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead

(a) Terace Floor

Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

(a) Terace Floor

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

(a) Ground Floor

(b) First Floor

(c) Second Floor

Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit.

Girth from 300mm to 600mm

Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.

Upto 1.5mtr Depth

From 1.5mtr Depth to 3.0mtr Depth

Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.

(a)Ground Floor

Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge.

(a)Ground Floor

Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre/Post-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.

(a)Ground Floor

Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.

(a)Ground Floor

Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.

Ground Floor

Depth 1.5 to 4.5mtr lvl

Providing and lying Plain Cement Concrete of proportion (1:4:8) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.

Ground Floor

Depth 1.5 to 4.5mtr lvl

Construction of embankment with earth approved material obtained from borrowpits, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

RCC WORK

Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25(minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement & centring shuttering.

Ground Floor

First Floor

Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.

(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.

(a)Ground Floor

R.C.C. Plinth Beam

(a)Ground Floor

(B)R.C.C. Column &cRoof Beam

Ground Floor

First Floor

Second Floor

Mumty Floor

(C) R.C.C. Slab

Ground Floor

First Floor

Second Floor

Mumty Floor

(D)R.C.C. Staircase

Ground Floor

First Floor

Second Floor

Mumty Floor

R.C.C. lintel

Ground Floor

First Floor

Second Floor

Mumty Floor

R.C.C. Wall

Ground Floor

First Floor

R.C.C. Grade Slab

Ground Floor

Double under reamed pile foundation with R.C.C. M25 using 12mm size black hard granite (crusher broken)stone chips including cost of boreholes but excluding cost of M.S. rod/Tor steel and labour chrages for cutting, bending and binding of steel.

450mm Dia & 6.00Mtr Long Per One Pile

For Each Addl. Depth of 0.50Mtr Beyond Initial Depth of 6.0Mtr add Extra to Rate

Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /JINDAL/SHYAM) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge. Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).

Ground Floor

First Floor

Second Floor

Mumty Floor

BRICK WORK

Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.

(a)Ground Floor

Providing and laying Brick masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. ( Excluding Cost Of Steel Reinforcement ).

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

FINISHING WORK

Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 16mm thick cement plaster in cement mortar (1:6) to the surfaces of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.(inner side)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 12mm thick cement plaster in cement mortar (1:6) to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading,royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.(Outer side)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 12mm thick cement plaster in cement mortar (1:4) with neat cement punning including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.

Ground Floor

Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:

Ground Floor

First Floor

Second Floor

PLINTH PROTECTION

Making plinth protection 100 mm thick using of M20 grade cement concrete necessary excavation, levelling & dressing & finishing the top smooth.

(a)Ground Floor

Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

First Floor

Terrace Floor

Providing and Laying of 2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges for all leads as per direction of the engineer-in-charge.

Ground Floor

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Ground Floor

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Mild steel tubes hot finished seamless type)

Ground Floor

Supplying, filling, spreading & leveling stone boulders of size range 40 mm in recharge pit of required thickness including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Ground Floor

Supplying, filling, spreading & leveling stone boulders of size range 20 mm in recharge pit of required thickness including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Ground Floor

FINISHING WORK

Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make: Birla White/J K Wall Putty)

Interior Wall Putty

Ground Floor

First Floor

Second Floor

Mumty Floor

Outer Wall Putty

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance,royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) (Make:Dulux/Nerolac/Berger/Asian Paint)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete. (Make:Dulux/Nerolac/Berger/Asian Paint)

Ground Floor

First Floor

Second Floor

Mumty Floor

Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance,labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use)

Ground Floor

First Floor

Second Floor

Mumty Floor

Painting two coats of synthetic enamel paint on road work over Plaster or RCC Works like (kerb wall,bridge rcc barrier) as per approved shade of approved quality , sand papering, polishing the surface including cost, conveyance,labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints are to be approved before procurement and use)

Ground Floor

Wall painting with Textured Paint of approved quality of pattern as specified in drawing including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

FLOORING WORK

Providing and laying of 600 mm x 600 mm Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying of Vitrified Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 600mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying 300mmx300mm ceramic floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and spacer of 4mm for grouting the joints of tiles using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/RAK/kajaria)

Ground Floor

First Floor

Second Floor

Ceramic wall tile With Epoxy Grout For Toilet Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 400mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and spacer of 4mm for grouting the joints of tiles using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/RAK/kajaria)

Ground Floor

First Floor

Ceramic wall tile Without Epoxy Grout Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 400mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying 300mm x 300mm Chequred Tiles. tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Providing & laying granite stone flooring using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade with typical half nosing and cutting grooves etc including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of granite tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying granite stone flooring in Floors and landing using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of granite tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size upto 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of granite tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying kota stone slabs in floors using 16 mm thick kota stone slab of approved quality, colour and size above 0.10 Sqm laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement : 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying kota stone slabs in dado/Skirting using 16 mm thick Kota stone of approved quality, colour and size above 0.10 Sqm laid over an under layer of 12mm thick cement mortar (1:3) (1 cement: 3 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

BUILT IN JOINERIES

Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Ground Floor

First Floor

Second Floor

Mumty Floor

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma)

Ground Floor

First Floor

Mumty Floor

Supplying and fitting-fixing of factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Ground Floor

First Floor

Mumty Floor

Supply and installig UPVC - 3 tracks sliding windows and 2 sashes (shutter) with SS mesh sash dimension of 58mm x 32mmnand sash dimension of 61mm x 37mm for windows with corners fusions welded, fully reinforced with galvanised steel of 1.2mm to 2mm. The sash will be fitted with 5mm reflective toughened glass of make - Saint Gobain/ AIS/ Goldplus. The windows must be installed complete with all kinds of ironmonergy (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of silicon sealant from inside / outside of dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T & P etc. complete in all respects as per approved drawings and directions of Engineer in charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.. complete in all respect as per the direction of the Engineer-in-Charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

Supplying ,fitting and fixing of openable UPVC door with of door frame of approved make with 6mm thick glass of approval quality complete with frame , shutter and all fitting and fixtures.

Ground Floor

Supplying and fixing of Powder coated 50-60 microns approved colour of Jindal aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass. the rate quoted inclusive of hardwares like antilift, roller, Espag lock cum handle, epdm gaskets, T mullion, Fly Mullion, bottom adopter, mid transom, glazing clip for 12 mm glass felt along with all accessories etc complete. The gap between the wall and window will be filled with silicon weather sealant in the outer side. including the cost of all materials ,hardware fittings,cost of all labour, conveyance, loading, un loading, T&P, etc, complete as per the direction of Engineer-in Charge.(As per Proceeding of C.C.E. Level committee meeting held on dt. 12.02.2024 at 11.30 A.M.)

Ground Floor

Supplying, fitting and fixing of M.S. grill ,Grated doors etc made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb with cost, conveyance, Materials, labour, T&P etc. required for the complete in all respect as per the direction of Engineer-in-Charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

S.S Railing

Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

G.R.C. JALI :- Providing and fixing Glass Reinforced Concrete (GR.C) Screens in approved size pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 4 Kg per Sq Ft and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from '53 grade' White Portland Cement manufactured by JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by 'N.E.G JAPAN or equivalent, Super Plasticizers manufactured by "BASF or equivalent Polymers manufactured by 'BASF or equivalent and UV resistant Synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be 'Dry fixing' Le to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.

Ground Floor

First Floor

Second Floor

TERACE/TOILET WATERPROOFING WORK

modified cementitious waterproofing coating over roof slab/Toilet after carrying out pond test on roof slab/Toilet, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes,Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L including cost of all materials, conveyance, taxes and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge. (Make:Star Chemicals India pvt ltd /Sika/Pidilite)

Ground Floor

First Floor

Second Floor

Terace Floor

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Ground Floor

Supplying and fixing of Colour coated galvalume metal sheets Zinc aluminum alloy coated, Not less than 150 gms/sq.m, having high tensile steel sheet (Fy 550 Mpa) of 0.5 mm minimum thickness (BMT). The outside face (exposed face) shall be permanently color coated with PVF-2 paint of minimum DFT 20 microns over primer and inner side (internal face) shall be coated with same paint of minimum DFT 12 microns ,Colour Coated Flashing & Ridge board with all fasteners and fixtures, scaffolding etc. complete at all heights as per drawings and specification including preparation of bill of materials & shop drawings. (Galvalume Sheets shall be of any reputed make including Kingspan Jindal/'Tata Blue Scope Steel Limited', 'Laj Color Leaf (P) Limited' Loyd Insulations etc.)

Ground Floor

Micro Concreting 1. Surface Preparation Removing all loose and unsound concrete from the damaged area by mechanical means/manual chipping without damaging the parent concrete. Cleaning of reinforcement with rust remover to remove all loose rust and scale. 2. Steel Protection Application of zinc-rich primer over cleaned reinforcement steel to prevent further corrosion. 3. Bonding Coat Application of bond coat consisting of cement slurry mixed with SBR Latex (Dr. Fixit Pidicrete URP or equivalent) over the prepared surface to ensure proper bonding between old and new concrete. 4. Repair Mortar / Micro Concrete Filling of repaired pockets with Polymer Modified Mortar (PMM) for small thickness repairs. For larger sections, use Dr. Fixit Micro Concrete to restore the structural profile. 5. Waterproofing Test After repairs, carry out ponding test on the opposite surface of the roof slab to check for any leakage/seepage. 6. Injection Grouting In case of observed seepage/leakage, carry out pressure injection grouting with suitable grout material (epoxy as specified) to arrest water ingress Complete as per the direction of the Engineer-in-Charge. (Note- Sample of materials shall be approved before procurement and use.)

Ground Floor

Groove cut the existing crack on concrete/masonry surface and remove all dust and loose particles, fill the cracks with Renderoc FC and inject the cracks by pressure grouting using Conbextra Cable Grout using PVC nozzles at speed less than 1 kg/cm2, Cut slits of 3 to 5mm width on the joints of crack line to depth of 15mm and 155mm on either side of crack, fill the groove with Renderoc SP40 and insert Nitoplate Crackfix plate having tensile strength >1000 MPA, fiber content 50 - 60% into the filled groove. Item rate is inclusive of materials all labour, tools and tackles, and transportation etc. complete as per specification and as directed by Engg.-in-charge. Payment shall be made as per actual site measurement. (Note- Sample of materials shall be approved before procurement and use.)

all Floor

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm mesh and required wideth for construction joints and chasing in brick work for electrical conduits or water supply pipes including cement slurry and pegs/nails with nailing machine as required before pastering etc. complete as directed by the Engineer-in-charge. (Note- Sample of materials shall be approved before procurement and use.)

all Floor

Chequred Tiles 300mmx300mm of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

Vetrified industrial floor Tile of premium grade having thickness 15mm to 16mm confirming to IS 4457 of size 600mmx600mm of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/kajaria)

Ground Floor

Finishing with Epoxy paint (Two or more coats) on steel work at all locations prepared and applied as per manufacturer's ecifications including appropriate priming coat(Red Oxide Zinc Chromate) , preparation of surface, etc. complete as per Direction of E.I.C.

Ground Floor

Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma)

Ground Floor

Pressed Steel Doors With Vision Panel Supply installation of pressed steel doors of the specified dimensions and accessories such as hinges,door,stopper,tower bolt,door handle,door closer,dead lock,consedaled flush bolt,shaft lock,martise lock and vision panel etc.complete as mentioned along with warranty coverrage and after sales service etc.inclusive of all costs,delivery charge,fixing,fitting and any other invidental charges etc.complete excluding GST 1. Hinges 2. Tower bolt 3. Door Stopper 4. Mortise Lock 5. Buffer (Make: Tata pravesh,Shaktihormann ETC)

Ground Floor

General Steeldoor Set 1000X2100 mm Single leaf door with vision panel

General Steeldoor Set 2,000.00X2,400.00 mm Double leaf door with vision panel

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.

Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.

Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Fixed window of approved make with 6mm thick glass of approved quality complete with frame, and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Fixed Partition of approved make with 6mm thick glass of approved quality complete with frame, and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying, fitting and fixing of 5.5mm thick hexagonal Aluminium jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminium jally and joiting angle confirming to standrad Aluminium sections etc. complete as directed by the Engineer-in-charge.

Supplying and fixing of Hospital Glow Letter Type Name Board (Acrylic) including cost of designing, material, machine cutting & labour for mounting complete in all respect as directed by the Engineer-in-Charge.(Rate Per Letter)

ACP Paneling - Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, for all heights and all levels etc. including : Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in required shape in metalic colour of approved shades made out of 3mm thick aluminium composite panel material consisting of Aluminium sheet (0.25mm thick). The aluminium composite panel cladding sheet shall be coil coated, with PVDF coating of approved colour and shade as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant (Dowsil 789), backer rods etc.The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge.10Years warrenty with MTC(Make-Viva/Euro Bond or Eq. Brand)

G.R.C. JALI - Providing and fixing Glass Reinforced Concrete (GR.C) Screens in approved size pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 4 Kg per Sq Ft and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from '53 grade' White Portland Cement manufactured by JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by 'N.E.G JAPAN or equivalent, Super Plasticizers manufactured by "BASF or equivalent Polymers manufactured by 'BASF or equivalent and UV resistant Synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be 'Dry fixing' Le to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer. complete in all respect as per specification & direction of the Engineer-in-Charge.

Gypsum Board False Ceiling - Providing fitting and fixing of gypsum board false ceilling with aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete in all respect as per specification & direction of the Engineer-in-Charge.

Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures.

Providing & fixing G.C.I. Sheet in roof including fixing of ridges wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample shall be approved before procurement and use.)

Ply Board & Mica Work :- Ply work with mica Finishing including cost of all materials, labour & T&P etc complete as per direction of the Engineer-in-charge.

Heavy Duty Rope Clothesline Ideal for Drying Heavy Clothes 4 mm Thickness Nylon ClotheslineWhite.

Supplying and fixing of Hospital Glow Letter Type Name Board (Acrylic) mentioning "PRIMARY HEALTH CENTER " size as per specification including cost of designing, material, machine cutting & labour for mounting complete in all respect as directed by the Engineer-in-Charge.

Supplying and fixing of Hospital Glow Letter Type Name Board (Acrylic) mentioning "REGISTRATION COUNTER" size as per specification including cost of designing, material, machine cutting & labour for mounting complete in all respect as directed by the Engineer-in-Charge.

Supplying and fixing Rain Water Harvesting System including gutters, pipes, filters, and storage tanks, machinaries, as well as installation charges etc complete as directed by the Engineer-in-charge.

Supplying Master Layout Map in vinyl printing cum pasting colored pictures, text and symbols including fixing, installing and transportation complete as per the direction of the Engineer-in-charge.

Grass

Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge.

SITE PREPARATION

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) .

Screened through sieve of I.S. designation 20 mm

Screened through sieve of I.S. designation 16 mm

Screened through sieve of I.S. designation 4.75 mm

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.

PLANTATION

Medicinal plant

Providing and Stacking of Curry leaf of height 75-90 cm in poly bag of size 25 cm as perdirection of the officer-in-cha

Providing and Stacking of Adusha of ht. 30 cm with multi branches in Poly bag of size 20 cm. as per direction of the officer-in-charge.

Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and Stacking of Peepli well developed in poly bag of size 20cm as per direction of the officer-in-charge.

Providing and Stacking of Shivnath well developed in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and Stacking of Marwa Dona of ht. 30cm with multi branches in Poly bag of size 20 cm.as per direction of the officer-in-charge

Providing and Stacking of Nirgundi well developed in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and Stacking of Ficus panda plant of height 90 -105 cm. multibranches, well developed in poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Mimusops elengi (Maulsri) of height 180-195 cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge

Providing and stacking of Foxtail palm of ht. 120-150 cm bottom girth 15- 20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.

Holes 90 cm dia, and 90 cm deep

Holes 45 cm dia, and 45 cm deep

Nilkamal Plastic Manual-Lift Wheel Garbage Dustbin (Green, Blue, 60 L)

Furniture

Godrej Make- High Back Chair Aero

Godrej Make- Mid Back Chair Aero

Godrej Make- Visitor Chair Versa Neo

Godrej Make- Traverse 3 Seater 2 Arms Mild Steel Public Seating

GODREJ MAKE - 3 SEATER WAITING CHAIR MATRIX

Godrej Make- Study Table T-31

Nilkamal Mystique Plastic Arm Chair

Godrej Make- Table Aristo Main Desk (1350x600x750)

Branding

Supplying Master Layout Map in vinyl printing cum pasting colored pictures, text and symbols including fixing, installing and transportation complete as per the direction of the Engineer-in-charge.

Supplying, fitting and fixing of 6mm ACP board framing with vinyl pasting (eco solvent printing) on back side of board including all accessories complete as per the direction of the Engineer-in-charge.

Supplying ,fitting and fixing of sun board with vinyl pasting (eco solvent printing) on back side of board including all accessories complete as per the direction of the Engineer-in-charge.

Supplying ,fitting and fixing of 3D acrylic logo with UV printing including all accessories etc complete as per the direction of the Engineer-in-charge.

Supplying and fixing Service Delivery Board Eco Flex made with blockout PVC material with printing colored pictures, text and symbols including mounting, installing and transportation complete as per the direction of the Engineer-in-charge.

Supplying and fixing sunboard/acrylic sandwich board with vinyl printing cum pasting colored pictures, text and symbols including mounting, installing and transportation complete as per the direction of the Engineer-in-charge.

Supplying Shoppers MS Black Magazine/Newspaper Stand With 3 Levels, back support, mesh design and wheels complete as per the direction of the Engineer-in-charge.

Supplying Periodical Display Rack made with CRCA Steel, 5 Levels having sizes W x H x D (cm) 90 x 183 x 45 complete as per the direction of the Engineer-in-charge.

Total

Providing and fixing Clorinated Polyvinyl Chloride [CPVC] pipes SDR-11 conforming to IS:15778, having thermal stablity for hot & cold water supply , including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes and fittings with one stp CPVC solvent cement and testing of joints complete as per specification and direction of Enfineer-in-charge.

20 mm PVC sch-80 pipes

25 mm PVC sch-80 pipes

32 mm PVC sch-80 pipes

50 mm PVC sch-80 pipes

Supplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification.

250mm Thick

Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including for passing GI / PVC pipes and fittings etc. and repairing the holes after insertion of pipes etc. with cement concrete 1:2:4 including finishing complete to make it leak proof leak to the damages all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification.

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge.

Supplying fitting fixing of C.P health facuet high pressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification.

15mm dia CP Health Faucet of 1mtr long PVC tube

Providing and fixing of Rational moulded polyethylene cylendrical vertical water storate tanks confirming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and proviidng extra sockets and jam nuts , fixing ball volve ete. including hoisting up to a hite of 5.00metes above ground level and placing the tank to the required position etc. all complete as per specification and direction of the engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.

110mm diameter PVC SWR pipes

75mm diameter PVC SWR pipes

110mm PVC door Tee

75mm PVC door Tee

110mm PVC offset

110mm PVC door bend

75mm PVC door bend

110mm PVC plain shoe bend

75mm PVC plain shoe bend

110mm PVC vent cowl

75mm PVC vent cowl

110mm S-trap

110mm P-trap

110mm SWR Pipe Clip

75mm SWR Pipe Clip

110/75 mm Dia Reducer/Connector

90mm Nahani Trap

Supplying all materials,labour and T&P for fixing of PVC 10 ltr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification.

10 Liters capacity PVC cistern

Supplying all materials,labour and T&P for fixing water closet ,squatting pan(Indian type.W.C.pan or Orissa pan) confirming to IS 2556 : Part-3-2004 duly embedded in cement concrete (1:4:8) using 40mm.nominal size h.b.g. chips [including foot rest for I.W.C. and trap] all complete as per specificationand directon of theEngineer - in - charge.

Supplying all materials,labour and Supplying all materials,labour and T&P for fixing in cement mortar (1:3) a pair of white vitereous china (250x130x30mm.) foot rest for squatting water closet. etc. all complete as per specificationand direction of the Engineer-in-charge.

Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral "S" or "P" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. All complete as per specification .

600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion)

Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed with chromium plated brass brackets fixed to wooden plugs with cromium plated brass screws complete as per specification.

Supplying all materials,labour and T&P for fixing of cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws as per specification.

Supplying all materials,labour and T&P for fixing standard size C. P. towel ring fixed fixed to wooden plugs with cromium plated brass screws complete as per specification.

Supplying all materials,labour and T&P for fixing of liquid soap container - glass container or plastic container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws as per specification.

Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good to the walls etc. all as per specification including cost of sink with all accessories.

Supplying fitting fixing of cromium plated CP over head shower rose with arm including polishing and complete as per specification and direction of the Engineer in charge.

Supplying all labour and T&P for fixing CP Concealed stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete.

Supplying all materials,labour and T&P for fixing Porcelain Flat Back Stall Type Urinal respectively with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing Drinking Water Purifier Stall Type etc. all complete as per specification.

Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification and direction of the Engineer in charge.

Supply and fixing of Geyser 2000 Watt (10 Lit.) of approved brand complete as per specification and direction of the Engineer in charge.

Supplying fitting fixing of cromium plated CP Wall Mixture 2 in 1 with out Telephonic Shower with arm including polishing and complete as per specification.

Total Rs.

Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.

250mmx250mm with RCC cover

Constructing inspection chamber with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Inspection Chamber inside size 750mm x 750mm and 450mm

Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes.

Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Construction of 100 Users Septic Tank (1No.s)

Constructing RCC soak way pit with R.C.C top slab in (1:2:4) mix, inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, complete as per specification.

Borewell

Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89

Total Rs.

WATER PURIFIER FACILITY(HOT & COLD TYPE)

Supply, installation,testing & commisioning of water cooler cum purifier with chiller in floor of following capacity including fixing the same on the floor with necessary water connection & waste waste arrengments with all labour, T&P etc.all complete as per the specification & direction of EIC. Storage Cooler cum UV Water Purifier 120 lit Capacity 40 ltr per hr cooling capacity, 120 ltr storage (40 ltr warm, 40 ltr cold, 40 ltr normal) Model- AG Green Pure Chill 120 PSS UV (Eureka Forbes/Kent

Supplying and fixing Drinking Water Signage made with sunboard/acrylic sandwich board with vinyl printing cum pasting colored pictures, text and symbols including mounting, installing and transportation complete as per the direction of the Engineer-in-charge.

SUB TOTAL

Internal P.H.,External P.H. & Sanitary Work

CONSTRUCTION & RENOVATION AT KUMBHARI PHC OF BARPALI BLOCK UNDER IMPLEMENTATION OF AMA HOSPITAL PHASE-II IN THE DISTRICT OF BARGARH, ODISHA.

INTERNAL ELECTRICAL WORK

INTERNAL WIRING.

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq) With 10Years Warenty

Group C

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr

Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group c

Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group C

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group C

Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group C

Call bell point

Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

SUB TOTAL

SUBMAIN.

Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 4 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) (For Switch Board Looping)

SUB TOTAL

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 5Years Warenty)

SUB TOTAL

CABLE .

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required.(Make-polycab/KEI/Rhino cable/Eq)

SUB TOTAL

END TERMINATION

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.

4C x 16 sq.mm

SUB TOTAL

EARTHING

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.

SUB TOTAL

FIXTURE

Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-JAQUAR/Bajaj/Eq.With 5Years Warenty.

Ceiling mounted indoor type batten type LED Luminaire with LED Lamp Similar to JAQUAR Cat No. LGLZ01X024XW or equivalent.

Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to JAQUAR Cat No.LBLK02X010XW or equivalent.

Supply, Installation, testing and commissioning of 10W Mirror Light Similar to JAQUAR Cat no-LGLZ01X010XW/Equivalent.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.Model -USHA ENERGIA 32 BLDC 5 STAR.

Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.Model-Usha AEROCLEAN.

Supply & fixing of 18W LED Down Light (S/R) similat to Jaquar Cat no-LNRO02S018SW/Equivalant With all accessories.

Supply & fixing of LED 36w 2'x2' Surface/Recessed Mounted Light similar to jaquar cat no-LULU2SL036XC / Equivalent. etc as required .

Supply & fixing of 6W LED Down Light (S/R) similat to Jaquar Cat no-LLCN01R006XC/Eq. model of Bajaj/Eq.with all accessories.

Supply, Installation, testing and commissioning of wall fan of 400 mm sweep as required.Model-400mm STRIKER HI SPEED.

Supply & fixing of 90W LED Street light For Building Premises Light Similar to Jaquar Cat no-LSRT015090XC with all accessories.

SUB TOTAL

Perforated type cable tray

Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays

Size of Cable Tray :300 mm x 50 mm

Size of Cable Tray :150 mm x 50 mm

SUB TOTAL

TV /TEL & DATA

Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.

Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.

Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.

Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. ( Tel junction Box)

Supplying & Commissioning of Telephone Hand Set.

Supplying & installation of 100 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.

SUB TOTAL

TOTAL INTERNALELECTRICAL WORK=

EXTERNAL ELECTRICAL WORK.

SUBMAIN.

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.

SUB TOTAL

CABLE .

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4core 16 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-Finolex /Polycab/ KEI/RR Cables / Havels/Eq.)

Laying of one number of PVC insulated and PVC seathed /COPPER XLPE power cable of 1.1 KV grade of 3Core 6 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-Finolex /Polycab/ KEI/RR Cables / Havels/Eq.)

SUB TOTAL

END TERMINATION

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.

4C x 16 sq.mm

SUB TOTAL

EARTHING

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.

SUB TOTAL

EXTERNAL LIGHTING (Make-JAQUAR/Havells/wipro/Ledure/Equivalant.)

Supply & fixing of LED Bollards light Similar to Jaquar Cat no-LBLD05R601XW/Equivalent Model of philips/wipro/Bajaj/Klite/ Halonix/Equivalent LED with all accessories.

Supply & fixing of 90W LED Street light Similar to Havells with 6M GI OCTAGONAL POLE and all accessories.

Supplying and fixing of of 50mm G.I pipe (Medium Class) along with accessories in ground including cutting & making good the same as required.

Supplying and fixing of of 32mm HDPE pipe ) along with accessories in ground including cutting & making good the same as required.

TOTAL

TOTAL LANDSCAPING ELECTRICAL=

AC WORK

Supply of A,C with indoor and outdoor unit

1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-18000)with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi/Carrier)

REFRIGRANT PIPING

Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job.

1 TR to 3 TR high wall split A.C

FRAME WORK

Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.

1 TR to 3 TR high wall split A.C

DRAIN PIPING

Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.

25mm nom. Dia pipe

Supply and fixing of 4kVA Voltage stabilizer (Make-V-Guard/Microtek

Total:

Smart Led

Supplying (55Inch) Smart TV having Resolution: 4K Ultra HD (3840 x 2160) Resolution,Refresh Rate : 50 Hertz,Connectivity : 3 Hdmi Ports For Seamless Connectivity With External Devices | 1 X Usb-A Usb Ports To Connect Hard Drives Or Other Usb Devices |Wi-Fi | Bluetooth | Anynet+ (Hdmi-Cec)| Ethernet (Lan) Port| Rf In (Terrestrial / Cable Input / Satellite Input) Sound: 20W Output- 2CH | Powerful Speakers with Q-Symphony Smart TV Features : Bixby | Web Browser | SmartThings Hub / Matter Hub / IoT-Sensor FuntionalityApple AirPlay | Daily+,Display: Crystal Processor 4K | HDR | Support | Mega Contrast | UHD Dimming | Contrast Enhancer | Motion Xcelerator | 4K Upscaling | Filmmaker Mode complete in all respect as per the direction of the Engineer-in-charge. (Samsung/LG/Haier or eq. brand) Warranty Information :1 Year Standard Warranty + 1 Year additional warranty on Panel from the date of purchase

Supplying and fixing Scrolling Led Display mounting, installing and transportation complete as per the direction of the Engineer-in-charge.

SUB TOTAL

Internal & External Building Electical

GENERAL ABSTRACT

CONSTRUCTION & RENOVATION AT TALPADAR PHC OF BIJEPUR BLOCK UNDER IMPLEMENTATION OF AMA HOSPITAL PHASE-II IN THE DISTRICT OF BARGARH, ODISHA.

Total

BILL OF QUANTITIES

DISMANTLING WORKS

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete

(a) Ground Floor

(b) First Floor

Dismantling brick or stone masonry in lime or cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

(a) Ground Floor

(b) First Floor

Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

(c) Second Floor

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

Dismantling and removing R.C.C. columns beams slab staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead.

(a) Ground Floor

(b) First Floor

Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead

(a) Terace Floor

Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead

(a) Ground Floor

(b) First Floor

(a) Terace Floor

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

(a) Ground Floor

(b) First Floor

(c) Second Floor

Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit.

Girth from 300mm to 600mm

Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.

Upto 1.5mtr Depth

From 1.5mtr Depth to 3.0mtr Depth

Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.

(a)Ground Floor

Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge.

(a)Ground Floor

Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre/Post-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.

(a)Ground Floor

Construction of embankment with earth approved material obtained from borrowpits, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.

(a)Ground Floor

Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.

Ground Floor

Depth 1.5 to 4.5mtr lvl

Providing and lying Plain Cement Concrete of proportion (1:4:8) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.

Ground Floor

Depth 1.5 to 4.5mtr lvl

RCC WORK

Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25(minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement & centring shuttering.

Ground Floor

First Floor

Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.

(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.

(a)Ground Floor

R.C.C. Plinth Beam

(a)Ground Floor

(B)R.C.C. Column &cRoof Beam

Ground Floor

First Floor

Second Floor

Mumty Floor

(C) R.C.C. Slab

Ground Floor

First Floor

Second Floor

Mumty Floor

(D)R.C.C. Staircase

Ground Floor

First Floor

Second Floor

Mumty Floor

R.C.C. lintel

Ground Floor

First Floor

Second Floor

Mumty Floor

R.C.C. Wall

Ground Floor

First Floor

R.C.C. Grade Slab

Ground Floor

Double under reamed pile foundation with R.C.C. M25 using 12mm size black hard granite (crusher broken)stone chips including cost of boreholes but excluding cost of M.S. rod/Tor steel and labour chrages for cutting, bending and binding of steel.

450mm Dia & 6.00Mtr Long Per One Pile

For Each Addl. Depth of 0.50Mtr Beyond Initial Depth of 6.0Mtr add Extra to Rate

Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /JINDAL/SHYAM) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge. Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).

Ground Floor

First Floor

Second Floor

Mumty Floor

BRICK WORK

Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.

(a)Ground Floor

Providing and laying Brick masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. ( Excluding Cost Of Steel Reinforcement ).

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

FINISHING WORK

Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 16mm thick cement plaster in cement mortar (1:6) to the surfaces of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.(inner side)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 12mm thick cement plaster in cement mortar (1:6) to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading,royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.(Outer side)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing 12mm thick cement plaster in cement mortar (1:4) with neat cement punning including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.

Ground Floor

Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:

Ground Floor

First Floor

Second Floor

PLINTH PROTECTION

Making plinth protection 100 mm thick using of M20 grade cement concrete necessary excavation, levelling & dressing & finishing the top smooth.

(a)Ground Floor

Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.

Ground Floor

First Floor

Terrace Floor

Providing and Laying of 2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges for all leads as per direction of the engineer-in-charge.

Ground Floor

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Ground Floor

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Mild steel tubes hot finished seamless type)

Ground Floor

Supplying, filling, spreading & leveling stone boulders of size range 40 mm in recharge pit of required thickness including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Ground Floor

Supplying, filling, spreading & leveling stone boulders of size range 20 mm in recharge pit of required thickness including cost of material, labour, carriage, royalty, etc complete as directed by the Engineer-in-charge.

Ground Floor

FINISHING WORK

Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make: Birla White/J K Wall Putty)

Interior Wall Putty

Ground Floor

First Floor

Second Floor

Mumty Floor

Outer Wall Putty

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance,royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) (Make:Dulux/Nerolac/Berger/Asian Paint)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete. (Make:Dulux/Nerolac/Berger/Asian Paint)

Ground Floor

First Floor

Second Floor

Mumty Floor

Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance,labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use)

Ground Floor

First Floor

Second Floor

Mumty Floor

Painting two coats of synthetic enamel paint on road work over Plaster or RCC Works like (kerb wall,bridge rcc barrier) as per approved shade of approved quality , sand papering, polishing the surface including cost, conveyance,labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints are to be approved before procurement and use)

Ground Floor

Wall painting with Textured Paint of approved quality of pattern as specified in drawing including cost of all materials, labours ,T&P, carriage, royalty, taxes etc. required for the work all complete as per direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

FLOORING WORK

Providing and laying of 600 mm x 600 mm Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying of Vitrified Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 600mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying 300mmx300mm ceramic floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and spacer of 4mm for grouting the joints of tiles using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/RAK/kajaria)

Ground Floor

First Floor

Second Floor

Ceramic wall tile With Epoxy Grout For Toilet Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 400mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and spacer of 4mm for grouting the joints of tiles using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/RAK/kajaria)

Ground Floor

First Floor

Ceramic wall tile Without Epoxy Grout Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 400mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and laying 300mm x 300mm Chequred Tiles. tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Providing & laying granite stone flooring using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade with typical half nosing and cutting grooves etc including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of granite tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying granite stone flooring in Floors and landing using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of granite tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size upto 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of granite tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying kota stone slabs in floors using 16 mm thick kota stone slab of approved quality, colour and size above 0.10 Sqm laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement : 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing & laying kota stone slabs in dado/Skirting using 16 mm thick Kota stone of approved quality, colour and size above 0.10 Sqm laid over an under layer of 12mm thick cement mortar (1:3) (1 cement: 3 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

First Floor

Second Floor

Mumty Floor

BUILT IN JOINERIES

Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Ground Floor

First Floor

Second Floor

Mumty Floor

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete

Ground Floor

First Floor

Second Floor

Mumty Floor

Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma)

Ground Floor

First Floor

Mumty Floor

Supplying and fitting-fixing of factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Ground Floor

First Floor

Mumty Floor

Supply and installig UPVC - 3 tracks sliding windows and 2 sashes (shutter) with SS mesh sash dimension of 58mm x 32mmnand sash dimension of 61mm x 37mm for windows with corners fusions welded, fully reinforced with galvanised steel of 1.2mm to 2mm. The sash will be fitted with 5mm reflective toughened glass of make - Saint Gobain/ AIS/ Goldplus. The windows must be installed complete with all kinds of ironmonergy (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of silicon sealant from inside / outside of dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T & P etc. complete in all respects as per approved drawings and directions of Engineer in charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.. complete in all respect as per the direction of the Engineer-in-Charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

Supplying ,fitting and fixing of openable UPVC door with of door frame of approved make with 6mm thick glass of approval quality complete with frame , shutter and all fitting and fixtures.

Ground Floor

Supplying and fixing of Powder coated 50-60 microns approved colour of Jindal aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass. the rate quoted inclusive of hardwares like antilift, roller, Espag lock cum handle, epdm gaskets, T mullion, Fly Mullion, bottom adopter, mid transom, glazing clip for 12 mm glass felt along with all accessories etc complete. The gap between the wall and window will be filled with silicon weather sealant in the outer side. including the cost of all materials ,hardware fittings,cost of all labour, conveyance, loading, un loading, T&P, etc, complete as per the direction of Engineer-in Charge.(As per Proceeding of C.C.E. Level committee meeting held on dt. 12.02.2024 at 11.30 A.M.)

Ground Floor

Supplying, fitting and fixing of M.S. grill ,Grated doors etc made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb with cost, conveyance, Materials, labour, T&P etc. required for the complete in all respect as per the direction of Engineer-in-Charge.

Ground Floor

First Floor

Second Floor

Mumty Floor

S.S Railing

Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

G.R.C. JALI :- Providing and fixing Glass Reinforced Concrete (GR.C) Screens in approved size pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 4 Kg per Sq Ft and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from '53 grade' White Portland Cement manufactured by JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by 'N.E.G JAPAN or equivalent, Super Plasticizers manufactured by "BASF or equivalent Polymers manufactured by 'BASF or equivalent and UV resistant Synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be 'Dry fixing' Le to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.

Ground Floor

First Floor

Second Floor

TERACE/TOILET WATERPROOFING WORK

modified cementitious waterproofing coating over roof slab/Toilet after carrying out pond test on roof slab/Toilet, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes,Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L including cost of all materials, conveyance, taxes and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge. (Make:Star Chemicals India pvt ltd /Sika/Pidilite)

Ground Floor

First Floor

Second Floor

Terace Floor

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Ground Floor

Supplying and fixing of Colour coated galvalume metal sheets Zinc aluminum alloy coated, Not less than 150 gms/sq.m, having high tensile steel sheet (Fy 550 Mpa) of 0.5 mm minimum thickness (BMT). The outside face (exposed face) shall be permanently color coated with PVF-2 paint of minimum DFT 20 microns over primer and inner side (internal face) shall be coated with same paint of minimum DFT 12 microns ,Colour Coated Flashing & Ridge board with all fasteners and fixtures, scaffolding etc. complete at all heights as per drawings and specification including preparation of bill of materials & shop drawings. (Galvalume Sheets shall be of any reputed make including Kingspan Jindal/'Tata Blue Scope Steel Limited', 'Laj Color Leaf (P) Limited' Loyd Insulations etc.)

Ground Floor

Micro Concreting 1. Surface Preparation Removing all loose and unsound concrete from the damaged area by mechanical means/manual chipping without damaging the parent concrete. Cleaning of reinforcement with rust remover to remove all loose rust and scale. 2. Steel Protection Application of zinc-rich primer over cleaned reinforcement steel to prevent further corrosion. 3. Bonding Coat Application of bond coat consisting of cement slurry mixed with SBR Latex (Dr. Fixit Pidicrete URP or equivalent) over the prepared surface to ensure proper bonding between old and new concrete. 4. Repair Mortar / Micro Concrete Filling of repaired pockets with Polymer Modified Mortar (PMM) for small thickness repairs. For larger sections, use Dr. Fixit Micro Concrete to restore the structural profile. 5. Waterproofing Test After repairs, carry out ponding test on the opposite surface of the roof slab to check for any leakage/seepage. 6. Injection Grouting In case of observed seepage/leakage, carry out pressure injection grouting with suitable grout material (epoxy as specified) to arrest water ingress Complete as per the direction of the Engineer-in-Charge. (Note- Sample of materials shall be approved before procurement and use.)

Ground Floor

Groove cut the existing crack on concrete/masonry surface and remove all dust and loose particles, fill the cracks with Renderoc FC and inject the cracks by pressure grouting using Conbextra Cable Grout using PVC nozzles at speed less than 1 kg/cm2, Cut slits of 3 to 5mm width on the joints of crack line to depth of 15mm and 155mm on either side of crack, fill the groove with Renderoc SP40 and insert Nitoplate Crackfix plate having tensile strength >1000 MPA, fiber content 50 - 60% into the filled groove. Item rate is inclusive of materials all labour, tools and tackles, and transportation etc. complete as per specification and as directed by Engg.-in-charge. Payment shall be made as per actual site measurement. (Note- Sample of materials shall be approved before procurement and use.)

all Floor

Providing and fixing GI chicken wire mesh 24 gauge and 12 mm mesh and required wideth for construction joints and chasing in brick work for electrical conduits or water supply pipes including cement slurry and pegs/nails with nailing machine as required before pastering etc. complete as directed by the Engineer-in-charge. (Note- Sample of materials shall be approved before procurement and use.)

all Floor

Chequred Tiles 300mmx300mm of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.)

Ground Floor

Vetrified industrial floor Tile of premium grade having thickness 15mm to 16mm confirming to IS 4457 of size 600mmx600mm of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/kajaria)

Ground Floor

Finishing with Epoxy paint (Two or more coats) on steel work at all locations prepared and applied as per manufacturer's ecifications including appropriate priming coat(Red Oxide Zinc Chromate) , preparation of surface, etc. complete as per Direction of E.I.C.

Ground Floor

Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma)

Ground Floor

Pressed Steel Doors With Vision Panel Supply installation of pressed steel doors of the specified dimensions and accessories such as hinges,door,stopper,tower bolt,door handle,door closer,dead lock,consedaled flush bolt,shaft lock,martise lock and vision panel etc.complete as mentioned along with warranty coverrage and after sales service etc.inclusive of all costs,delivery charge,fixing,fitting and any other invidental charges etc.complete excluding GST 1. Hinges 2. Tower bolt 3. Door Stopper 4. Mortise Lock 5. Buffer (Make: Tata pravesh,Shaktihormann ETC)

Ground Floor

General Steeldoor Set 1000X2100 mm Single leaf door with vision panel

General Steeldoor Set 2,000.00X2,400.00 mm Double leaf door with vision panel

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.

Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.

Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Fixed window of approved make with 6mm thick glass of approved quality complete with frame, and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Fixed Partition of approved make with 6mm thick glass of approved quality complete with frame, and all fitting and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supplying, fitting and fixing of 5.5mm thick hexagonal Aluminium jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminium jally and joiting angle confirming to standrad Aluminium sections etc. complete as directed by the Engineer-in-charge.

Supplying and fixing of Hospital Glow Letter Type Name Board (Acrylic) including cost of designing, material, machine cutting & labour for mounting complete in all respect as directed by the Engineer-in-Charge.(Rate Per Letter)

ACP Paneling - Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, for all heights and all levels etc. including : Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in required shape in metalic colour of approved shades made out of 3mm thick aluminium composite panel material consisting of Aluminium sheet (0.25mm thick). The aluminium composite panel cladding sheet shall be coil coated, with PVDF coating of approved colour and shade as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant (Dowsil 789), backer rods etc.The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge.10Years warrenty with MTC(Make-Viva/Euro Bond or Eq. Brand)

G.R.C. JALI - Providing and fixing Glass Reinforced Concrete (GR.C) Screens in approved size pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 4 Kg per Sq Ft and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from '53 grade' White Portland Cement manufactured by JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by 'N.E.G JAPAN or equivalent, Super Plasticizers manufactured by "BASF or equivalent Polymers manufactured by 'BASF or equivalent and UV resistant Synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be 'Dry fixing' Le to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer. complete in all respect as per specification & direction of the Engineer-in-Charge.

Gypsum Board False Ceiling - Providing fitting and fixing of gypsum board false ceilling with aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete in all respect as per specification & direction of the Engineer-in-Charge.

Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures.

Providing & fixing G.C.I. Sheet in roof including fixing of ridges wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample shall be approved before procurement and use.)

Ply Board & Mica Work :- Ply work with mica Finishing including cost of all materials, labour & T&P etc complete as per direction of the Engineer-in-charge.

Heavy Duty Rope Clothesline Ideal for Drying Heavy Clothes 4 mm Thickness Nylon ClotheslineWhite.

Supplying and fixing of Hospital Glow Letter Type Name Board (Acrylic) mentioning "PRIMARY HEALTH CENTER " size as per specification including cost of designing, material, machine cutting & labour for mounting complete in all respect as directed by the Engineer-in-Charge.

Supplying and fixing of Hospital Glow Letter Type Name Board (Acrylic) mentioning "REGISTRATION COUNTER" size as per specification including cost of designing, material, machine cutting & labour for mounting complete in all respect as directed by the Engineer-in-Charge.

Supplying and fixing Rain Water Harvesting System including gutters, pipes, filters, and storage tanks, machinaries, as well as installation charges etc complete as directed by the Engineer-in-charge.

Supplying Master Layout Map in vinyl printing cum pasting colored pictures, text and symbols including fixing, installing and transportation complete as per the direction of the Engineer-in-charge.

Grass

Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge.

SITE PREPARATION

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) .

Screened through sieve of I.S. designation 20 mm

Screened through sieve of I.S. designation 16 mm

Screened through sieve of I.S. designation 4.75 mm

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.

PLANTATION

Medicinal plant

Providing and Stacking of Curry leaf of height 75-90 cm in poly bag of size 25 cm as perdirection of the officer-in-cha

Providing and Stacking of Adusha of ht. 30 cm with multi branches in Poly bag of size 20 cm. as per direction of the officer-in-charge.

Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and Stacking of Peepli well developed in poly bag of size 20cm as per direction of the officer-in-charge.

Providing and Stacking of Shivnath well developed in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and Stacking of Marwa Dona of ht. 30cm with multi branches in Poly bag of size 20 cm.as per direction of the officer-in-charge

Providing and Stacking of Nirgundi well developed in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and Stacking of Ficus panda plant of height 90 -105 cm. multibranches, well developed in poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Mimusops elengi (Maulsri) of height 180-195 cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge

Providing and stacking of Foxtail palm of ht. 120-150 cm bottom girth 15- 20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.

Holes 90 cm dia, and 90 cm deep

Holes 45 cm dia, and 45 cm deep

Nilkamal Plastic Manual-Lift Wheel Garbage Dustbin (Green, Blue, 60 L)

Furniture

Godrej Make- High Back Chair Aero

Godrej Make- Mid Back Chair Aero

Godrej Make- Visitor Chair Versa Neo

Godrej Make- Traverse 3 Seater 2 Arms Mild Steel Public Seating

GODREJ MAKE - 3 SEATER WAITING CHAIR MATRIX

Godrej Make- Study Table T-31

Nilkamal Mystique Plastic Arm Chair

Godrej Make- Table Aristo Main Desk (1350x600x750)

Branding

Supplying Master Layout Map in vinyl printing cum pasting colored pictures, text and symbols including fixing, installing and transportation complete as per the direction of the Engineer-in-charge.

Supplying, fitting and fixing of 6mm ACP board framing with vinyl pasting (eco solvent printing) on back side of board including all accessories complete as per the direction of the Engineer-in-charge.

Supplying ,fitting and fixing of sun board with vinyl pasting (eco solvent printing) on back side of board including all accessories complete as per the direction of the Engineer-in-charge.

Supplying ,fitting and fixing of 3D acrylic logo with UV printing including all accessories etc complete as per the direction of the Engineer-in-charge.

Supplying and fixing Service Delivery Board Eco Flex made with blockout PVC material with printing colored pictures, text and symbols including mounting, installing and transportation complete as per the direction of the Engineer-in-charge.

Supplying and fixing sunboard/acrylic sandwich board with vinyl printing cum pasting colored pictures, text and symbols including mounting, installing and transportation complete as per the direction of the Engineer-in-charge.

Supplying Shoppers MS Black Magazine/Newspaper Stand With 3 Levels, back support, mesh design and wheels complete as per the direction of the Engineer-in-charge.

Supplying Periodical Display Rack made with CRCA Steel, 5 Levels having sizes W x H x D (cm) 90 x 183 x 45 complete as per the direction of the Engineer-in-charge.

Total

Providing and fixing Clorinated Polyvinyl Chloride [CPVC] pipes SDR-11 conforming to IS:15778, having thermal stablity for hot & cold water supply , including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes and fittings with one stp CPVC solvent cement and testing of joints complete as per specification and direction of Enfineer-in-charge.

20 mm PVC sch-80 pipes

25 mm PVC sch-80 pipes

32 mm PVC sch-80 pipes

50 mm PVC sch-80 pipes

Supplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification.

250mm Thick

Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including for passing GI / PVC pipes and fittings etc. and repairing the holes after insertion of pipes etc. with cement concrete 1:2:4 including finishing complete to make it leak proof leak to the damages all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification.

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge.

Supplying fitting fixing of C.P health facuet high pressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification.

15mm dia CP Health Faucet of 1mtr long PVC tube

Providing and fixing of Rational moulded polyethylene cylendrical vertical water storate tanks confirming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and proviidng extra sockets and jam nuts , fixing ball volve ete. including hoisting up to a hite of 5.00metes above ground level and placing the tank to the required position etc. all complete as per specification and direction of the engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.

110mm diameter PVC SWR pipes

75mm diameter PVC SWR pipes

110mm PVC door Tee

75mm PVC door Tee

110mm PVC offset

110mm PVC door bend

75mm PVC door bend

110mm PVC plain shoe bend

75mm PVC plain shoe bend

110mm PVC vent cowl

75mm PVC vent cowl

110mm S-trap

110mm P-trap

110mm SWR Pipe Clip

75mm SWR Pipe Clip

110/75 mm Dia Reducer/Connector

90mm Nahani Trap

Supplying all materials,labour and T&P for fixing of PVC 10 ltr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification.

10 Liters capacity PVC cistern

Supplying all materials,labour and T&P for fixing water closet ,squatting pan(Indian type.W.C.pan or Orissa pan) confirming to IS 2556 : Part-3-2004 duly embedded in cement concrete (1:4:8) using 40mm.nominal size h.b.g. chips [including foot rest for I.W.C. and trap] all complete as per specificationand directon of theEngineer - in - charge.

Supplying all materials,labour and Supplying all materials,labour and T&P for fixing in cement mortar (1:3) a pair of white vitereous china (250x130x30mm.) foot rest for squatting water closet. etc. all complete as per specificationand direction of the Engineer-in-charge.

Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral "S" or "P" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. All complete as per specification .

600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion)

Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed with chromium plated brass brackets fixed to wooden plugs with cromium plated brass screws complete as per specification.

Supplying all materials,labour and T&P for fixing of cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws as per specification.

Supplying all materials,labour and T&P for fixing standard size C. P. towel ring fixed fixed to wooden plugs with cromium plated brass screws complete as per specification.

Supplying all materials,labour and T&P for fixing of liquid soap container - glass container or plastic container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws as per specification.

Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good to the walls etc. all as per specification including cost of sink with all accessories.

Supplying fitting fixing of cromium plated CP over head shower rose with arm including polishing and complete as per specification and direction of the Engineer in charge.

Supplying all labour and T&P for fixing CP Concealed stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete.

Supplying all materials,labour and T&P for fixing Porcelain Flat Back Stall Type Urinal respectively with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing Drinking Water Purifier Stall Type etc. all complete as per specification.

Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification and direction of the Engineer in charge.

Supply and fixing of Geyser 2000 Watt (10 Lit.) of approved brand complete as per specification and direction of the Engineer in charge.

Supplying fitting fixing of cromium plated CP Wall Mixture 2 in 1 with out Telephonic Shower with arm including polishing and complete as per specification.

Total Rs.

Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.

250mmx250mm with RCC cover

Constructing inspection chamber with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Inspection Chamber inside size 750mm x 750mm and 450mm

Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes.

Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Construction of 100 Users Septic Tank (1No.s)

Constructing RCC soak way pit with R.C.C top slab in (1:2:4) mix, inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, complete as per specification.

Borewell

Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89

Total Rs.

WATER PURIFIER FACILITY(HOT & COLD TYPE)

Supply, installation,testing & commisioning of water cooler cum purifier with chiller in floor of following capacity including fixing the same on the floor with necessary water connection & waste waste arrengments with all labour, T&P etc.all complete as per the specification & direction of EIC. Storage Cooler cum UV Water Purifier 120 lit Capacity 40 ltr per hr cooling capacity, 120 ltr storage (40 ltr warm, 40 ltr cold, 40 ltr normal) Model- AG Green Pure Chill 120 PSS UV (Eureka Forbes/Kent

Supplying and fixing Drinking Water Signage made with sunboard/acrylic sandwich board with vinyl printing cum pasting colored pictures, text and symbols including mounting, installing and transportation complete as per the direction of the Engineer-in-charge.

SUB TOTAL

Internal P.H.,External P.H. & Sanitary Work(LS)

CONSTRUCTION & RENOVATION AT TALPADAR PHC OF BIJEPUR BLOCK UNDER IMPLEMENTATION OF AMA HOSPITAL PHASE-II IN THE DISTRICT OF BARGARH, ODISHA.

INTERNAL ELECTRICAL WORK

INTERNAL WIRING.

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq) With 10Years Warenty

Group C

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr

Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group c

Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group C

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group C

Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group C

Call bell point

Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

SUB TOTAL

SUBMAIN.

Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 4 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) (For Switch Board Looping)

SUB TOTAL

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 5Years Warenty)

SUB TOTAL

CABLE .

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required.(Make-polycab/KEI/Rhino cable/Eq)

SUB TOTAL

END TERMINATION

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.

4C x 16 sq.mm

SUB TOTAL

EARTHING

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.

SUB TOTAL

FIXTURE

Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-JAQUAR/Bajaj/Eq.With 5Years Warenty.

Ceiling mounted indoor type batten type LED Luminaire with LED Lamp Similar to JAQUAR Cat No. LGLZ01X024XW or equivalent.

Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to JAQUAR Cat No.LBLK02X010XW or equivalent.

Supply, Installation, testing and commissioning of 10W Mirror Light Similar to JAQUAR Cat no-LGLZ01X010XW/Equivalent.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.Model -USHA ENERGIA 32 BLDC 5 STAR.

Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.Model-Usha AEROCLEAN.

Supply & fixing of 18W LED Down Light (S/R) similat to Jaquar Cat no-LNRO02S018SW/Equivalant With all accessories.

Supply & fixing of LED 36w 2'x2' Surface/Recessed Mounted Light similar to jaquar cat no-LULU2SL036XC / Equivalent. etc as required .

Supply & fixing of 6W LED Down Light (S/R) similat to Jaquar Cat no-LLCN01R006XC/Eq. model of Bajaj/Eq.with all accessories.

Supply, Installation, testing and commissioning of wall fan of 400 mm sweep as required.Model-400mm STRIKER HI SPEED.

Supply & fixing of 90W LED Street light For Building Premises Light Similar to Jaquar Cat no-LSRT015090XC with all accessories.

SUB TOTAL

Perforated type cable tray

Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays

Size of Cable Tray :300 mm x 50 mm

Size of Cable Tray :150 mm x 50 mm

SUB TOTAL

TV /TEL & DATA

Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.

Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.

Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.

Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. ( Tel junction Box)

Supplying & Commissioning of Telephone Hand Set.

Supplying & installation of 100 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.

SUB TOTAL

TOTAL INTERNALELECTRICAL WORK=

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Miscellaneous Construction and Renovation work at PHC Kumbhari of Barpali block and Talpadar of Bijepur block in the District of Bargarh Odisha under AMA Hospital Phase-II

Please Enable Macros to View BoQ information