Renovation works of Changampuzha Park,Edappally Ernakulam

Amount

Civil Works 2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

od341479/2022_2023 : Engaging labour - coolie

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

15.58 : Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.2.1 : Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

6.3.1 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With F.P.S. ( non modular ) bricks

13.2.1 : 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

11.26.1 : Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick

8.18.1.1 : Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately).Kota stone slabs exposed face dressed and rubbed.25 mm thick

13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade

30.2.7 : Fine dressing of the ground

30.2.14.3 : Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep

30.2.14.4 : Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 45 cm dia, and 45 cm deep

30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.4.1 : Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm

30.2.57.1 : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)

30.2.57.2 : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Shrubs plants (for 200 nos.=427.45/200)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.10.1 : Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge:In lime mortar

16.78.2 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

2.16.1 : Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements to be taken of the face area timbered).Depth not exceeding 1.5m

2.16.2 : Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements to be taken of the face area timbered).Depth exceeding 1.5 m but not exceeding 3 m

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.4 : Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

11.33.2 : 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with:Second class deodar wood

11.53 : Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in-charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-charge.

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

10.26.1 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

30.2.20 : Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).

30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler

2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

16.4 : Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

11.20.1 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Light shade pigment using white cement

10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

12.20 : Providing and laying pressed clay tiles ( as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat completeProviding and laying pressed clay tiles ( as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 ( 1 cement : 4 coarse sand mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) and finished neat complete

15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

22.23A : Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

8.14.2.5 : Red sand stone - Exposed face machine cut and table rubbed with rough backing.30 mm thick

13.48A.1 : Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

15.18 : Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

11.38 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

9.117.2 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 42x50 mm

9.120.1 : Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters

12.1.3 : Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

17.7.1 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

17.73.2 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms

50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

18.22.2 : Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter

17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern

18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes

18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes

18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes

18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.9.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes

18.9.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work25 mm nominal outer dia pipes

18.9.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work32 mm nominal outer dia pipes

18.9.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes

50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl

50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

18.15.1 : Providing and fixing brass bib cock of approved quality :15 mm nominal bore

17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

17.78 : Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

17.5.4 : Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Range of four half stall urinals with 10 litre PVC. automatic flushing cistern

17.34.1 : Providing and fixing toilet paper holder:C.P. brass

17.77.1 : Providing and fixing M.S.holder bat clamp of approved design to sand cast iron /cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4 nos, 6 mm dia expansion hold fasteners, including drilling necessary holes in brick wall / CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x 1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.Total bracket length 580 mm of approved shape and design ( for single 100 mm dia pipe)

19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore

18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

od345756/2022_2023 : Engaging labour for petty works-Fitter

od345794/2022_2023 : Engaging JCB for relocating Sculptures, Play equipments, OH tank over steel frame, Stone seatings etc..<br>as per the instructions of officers in charge.

od346309/2022_2023 : Supply and laying of Natural Cobble Stones of size 4 x4 x 2 inch over a bedding layer of 50mm PCC for<br>the area as per the given drawings.

od346585/2022_2023 : Supply of healthy, disease free, weed free, well grown minimum 6months to 1 year old specimen size<br>Pearl grass turf . The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same.

od346586/2022_2023 : Spreading of earth, sand and streameal or organic manure <br>in required thickness as per direction of<br>officer-in-charge (cost of manure, sand and earth to be paid separately).

od346594/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Sheflera, Hamelia patterns.

od346595/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Duranta fern leaf.<br>

od346596/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Arralia varieties, Taberna varieties, Exocaria, Pentas<br>lanceolata varieties & canna dwarf

od346597/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Mussanda lutea, Taberna very-broad leaf, Spider lillies<br>variegated, Hibiscus variegated & Draceana varieties

od346598/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Shrubs - Cassia biflora.<br>

od346599/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Shrubs - Hibiscus viceroy

od346600/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Shrubs - Ficus panda.

od346601/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Shrubs - Muraya exotica.

od346602/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Shrubs - Calathea Iutea

od346603/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Shrubs - Heliconia hanging varieties.

od346604/2022_2023 : Supply of healthy, disease free, well grown 6months to 1 year old specimen size Plants in the pot or Poly<br>bags. The rates are inclusive of loading, packing, transporting and unloading at site without any damages<br>to the same. Shrubs – Heliconia St. Vincent Red, Nerieum oleander.<br>

od346605/2022_2023 : Supply of healthy, disease free, well grown 6months to 1 year old specimen size Plants in the pot or Poly<br>bags. The rates are inclusive of loading, packing, transporting and unloading at site without any damages<br>to the same . Shrubs – Melastoma

od346606/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Trees in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Trees - Plumeria

od346607/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Palms in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Palms – Golden becha palm tree

od346608/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Palms in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Palms – Ptychosperma macarthurii & Raphis Palm.

od346609/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Palms in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Palms – Cycad

od346610/2022_2023 : Supply of Streameal or equivalent manure for plants, Shrubs and Trees etc.

od346611/2022_2023 : Supplying and stacking of Sand at site including royalty and carriage upto 5 k.m. lead complete (earth<br>measured in stacks will be reduced by 20% for payment).

od346614/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Ground cover - Zephranthus varieties & Hemigraphis rapanda.<br>

od346615/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Ground cover - Nephrolepis varieties.<br>

od346616/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Ground cover - Miscellanies verities.<br>

od346617/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at <br>site without any damages to the same. Semi Shrubs-Duranta erecta.

od346618/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Semi Shrubs - Spider lilies.

od346619/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Semi Shrubs - Nerium dwarf.

od346620/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Semi Shrubs - Lantana yellow.

od346621/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Semi Shrubs -Acalypha varieties

od346622/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Alocasia varieties & Alocasia kuching mask.

od346623/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Ixora varieties, Eranthimum.

od346624/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Alpinia yellow, Alpinia purpurata & Hydrangea.

od346625/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen size Plants in the<br>pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without<br>any damages to the same. Semi Shrubs - Alpinia purpurata variegated.

od346627/2022_2023 : Supply and fixing approved brand of Open gym equipment - Cross stepper with<br>product zone - 2.00m x 0.70m & play zone - 3.00m x 1.70 m including all cost of materials ( GI Pipes,<br>Polyethylene moulded seats etc..), labour charges and Powder coated surface finishing works.(Concrete for<br>fixing is to be paid seperately)<br>

od346628/2022_2023 : Supply and fixing of approved brand Open gym equipment - Fitness rider with product<br>zone - 1.20m x 0.50m & play zone - 2.20m x 1.50 m including all cost of materials (GI Pipes, Polyethylene<br>moulded seats etc..), labour charges and Powder coated surface finishing works.(Concrete for fixing is to be<br>paid seperately)<br>

od346629/2022_2023 : Supply and fixing of approved brand Open gym equipment - Balance swing with<br>product zone - 1.00m x 0.50m & play zone - 2.00m x 1.50 m including all cost of materials (GI pipes,<br>Polyethylene moulded seats etc..), labour charges & Powder coated surface finishing works. (Concrete for<br>fixing is to be paid seperately)<br>

od346630/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Ground cover - Ribbon grass green & Ribbon grass white.<br>

od346631/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Ground cover - Rheo, Lantana sellowiana, Hemigraphis elternata.

od346632/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Ground cover - Russelia & Yellow variegated ornamental grass.

od346633/2022_2023 : :Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at site without any damages to the same.Ground cover - Spathyfyllum

od346634/2022_2023 : Supply of healthy, disease free, well grown minimum 6months to 1 year old specimen<br>size Plants in the pot or Poly bags. The rates are inclusive of loading, packing, transporting and unloading at<br>site without any damages to the same. Ground cover - Monto grass, Jaqmontia, Pandanus.

od347731/2022_2023 : Supply and fixing of approved brand Open gym equipment - Pull up handles with product zone - 1.60m x<br>0.30m & play zone - 2.60m x 1.30 m including all cost of materials (GI Pipes, Polyethylene moulded seats<br>etc...), labour charges and Powder coated surface finishing works.(Concrete for fixing is to be paid<br>seperately)

od348149/2022_2023 : Dismantling play equipment by mechanical means including stacking of serviceable<br>and disposal of unserviceabe material within 50 meters lead as per direction of engineer in charge.<br>

od348150/2022_2023 : Filling with gravelly earth (Excluding rock)in footpath, trenches, plinth side of<br>foundation etc..in layer not exceeding 20 cm in depth consolidating each deposited layer by ramming and<br>watering lead up to 50m and lift up to 1.50m as per the direction of site engineer in charge

od348151/2022_2023 : Providing & laying Vacuum dewatered flooring ( Tre mix flooring) of RCC M-25 (330kg<br>of cement per cum of finish concrete) including providing side shuttering with MS channels, vibrating<br>concrete by using screed vibrator and suction , dewatering using approved make equipment and finishing<br>the top surface to required level and grade using power trowel of standard make. Rate to include for<br>covering the finished concrete surface with 200micron thick polythene sheet and curing. (Reinforcement<br>shall be measured and paid separately )<br>Data for 6.00x 4.00m = 24.00m2

od348152/2022_2023 : Supply and fixing Play equipment – Double arch swing with Product zone – 3.20m x<br>1.10m & Play zone - 4.20m x 5.00m with following specifications:<br>Legs of the swing are made of 80NB B<br>class GI CHS, Cross bar of the swing is made of 50NB B class GI CHS, Swing clamps are made of PPCP<br>(Poly propylene Co Polymer) Plastic, Stainless steel hook and bearing is provided in the clamp for the<br>smooth functioning, Rubber dipped molded chains are used in the swing in order to prevent it from rusting<br>as well as finger entrapment, Belt seat of the swing is made of 10mm thick rubber material. All metal parts are painted up to min 90 microns. All fasteners used in the assembly are made of stainless steel materials.<br>(Concrete for fixing is to be paid separately)<br>

od348153/2022_2023 : <br>Supply and fixing Play equipment – Double Post swing with Product zone – 3.10m<br>x 0.20m & Play zone - 4.10m x 5.00m with following specifications:<br>Legs of the swing are made of 80NB B<br>class GI CHS, Cross bar of the swing is made of 50NB B class GI CHS, Swing clamps are made of PPCP<br>(Poly propylene Co Polymer) Plastic, Stainless steel hook and bearing is provided in the clamp for the<br>smooth functioning, Rubber dipped molded chains are used in the swing in order to prevent it from rusting<br>as well as finger entrapment, Belt seat of the swing is made of 10mm thick rubber material. All metal parts<br>are painted up to min 90 microns. All fasteners used in the assembly are made of stainless steel materials.<br>(Concrete for fixing is to be paid separately)<br><br>

od348154/2022_2023 : :Supply and fixing Play equipment – S Rail Scrambler with Product zone – 4.30m x<br>2.40m & Play zone – 5.30m x 3.40m with following specifications:<br>Legs of the scrambler are made of<br>50NB B class GI CHS and Railings of the scrambler are made of 25NB & 20 NB B class GI CHS. All metal<br>parts are painted up to min 90 microns. All fasteners used in the assembly are made of stainless steel :Supply and fixing Play equipment – S Rail Scrambler with Product zone – 4.30m x<br>2.40m & Play zone – 5.30m x 3.40m with following specifications:<br>Legs of the scrambler are made of<br>50NB B class GI CHS and Railings of the scrambler are made of 25NB & 20 NB B class GI CHS. All metal<br>parts are painted up to min 90 microns. All fasteners used in the assembly are made of stainless steel:Supply and fixing Play equipment – S Rail Scrambler with Product zone – 4.30m x<br>2.40m & Play zone – 5.30m x 3.40m with following specifications:<br>Legs of the scrambler are made of<br>50NB B class GI CHS and Railings of the scrambler are made of 25NB & 20 NB B class GI CHS. All metal<br>parts are painted up to min 90 microns. All fasteners used in the assembly are made of stainless steel materials. (Concrete for fixing is to be paid separately)<br>

od348155/2022_2023 : Supply and fixing Play equipment – Standard Seesaw with Product zone – 2.60m x<br>0.30m & Play zone – 3.60m x 1.30m with following specifications:<br>Main frame of Seesaw is made up of<br>80NB, 15NB & 25NB B class GI CHS, leg is made of 50NB B class GI CHS, Seat of the Seesaw is made of<br>Fibre reinforced plastic (FRP) . Both ends of the main frame is closed using pipe end caps which are made of<br>PPCP ( Poly propylene Co Polymer ) Plastic. Good quality nylon bushings are provided in the Seesaw for<br>smooth functioning. All metal parts are painted up to min 90 microns. All fasteners used in the assembly are<br>made of stainless steel materials. (Concrete for fixing is to be paid separately)<br>

od348156/2022_2023 : <br>Supply and fixing Play equipment – Merry go round with Product zone – 2.00m x<br>2.00m & Play zone – 3.00m x 3.00m with following specifications:<br>Main frame of MGR is made up of<br>40NB, 25NB & 20NB B class GI CHS, leg of MGR made of 80NB B class GI CHS, Seats of MGR is made of<br>Fibre reinforced plastic (FRP) . They have 5mm wall thickness, SKF bearings are provided in the assembly<br>for smooth rotation, Bearing seal is provided for preventing the entry of foreign particles in the mechanism<br>which may cause damage to the bearings. All metal parts are painted up to min 90 microns. All fasteners<br>used in the assembly are made of stainless steel materials. (Concrete for fixing is to be paid separately)<br>

od348157/2022_2023 : Supply and fixing Play equipment – 3 feet straight slide with Product zone - 2.60m x<br>0.60m & Play zone - 4.60m x 2.60m with following specifications:<br>Slide made of Fibre reinforced Plastic<br>(FRP), 5mm wall thickness, Ladder steps made off 2mm thick GI sheets, Ladder handrails are made of 15NB,<br>20NB & 25NB B class CHS, Platform of the slide is made of 3mm thick GI sheets, Pillar of the platform is<br>made of 80NB B class GI hollow section, end stay pipes are made of 20NB B class GI CHS, All metal parts<br>are painted up to min 90 microns. All fasteners used in the assembly are made of stainless steel materials.<br>(Concrete for fixing is to be paid separately)<br>

od348158/2022_2023 : Providing installation of Polypropylene modular tiles of available standard colors for<br>multisport of MVC make as per below specifications:<br>ITF certified, Double layered, Total thickness of<br>15.7mm, weight g / piece >= 340, length 304.8mm & width 304.8mm, tile structure material – modified<br>propylene polymer connection inter-lock, warranty 5 years (including material, required side profile kerbs,<br>line marking, transportation & labour excluding unloading at site, crew accommodation)<br>

od348159/2022_2023 : Supply and installation of 6mm thick EPDM + 30mm SBR system over Concrete sub<br>base. 1) Primer with PU Binder over sub base. 2) 30mm thick Black SBR Granules mix with PU Binder as per<br>the manufacturer's instructions. 3) 6mm thick Ecolastic EPDM 1-4mm Granules size mix with P U Binderas<br>per the manufacturer's instructions.

od348160/2022_2023 : Supplying and fixing of the Stone Column of dia 38cm & height 263 cm as per the<br>given drawings and instructions of engineer-in-charge. (Concrete for fixing paid seperately)

od348161/2022_2023 : Providing and laying wooden finish floor tiles in different sizes (thickness to be<br>specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of<br>approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand),<br>including grouting the joints with white cement and matching pigments etc., complete.<br>Size of Tile 600 x<br>600 mm.Details of cost for 1 sqm.<br>

od348162/2022_2023 : Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the<br>material within 50 metres lead of : Mangalore pattern Roofing tile<br>Details of cost for 10 sqm

od348163/2022_2023 : Providing and fixing PVC floor trap (multi trap) ,110 mm outer dia with CP grating and<br>150mm square grating ring including all charges.

od348486/2022_2023 : Mixing earth, sand and streameal or organic manure in the required proportion specified or directed by<br>the Officer-in-charge

CUBE INDIA ENGINEERING

MUJEEB RAHIMAN