PROVIDING MINI HIGH MAST IN NINE VERIOUS PLACE UNDER EDAMULACKAL GRAMA PANCHAYATH

Amount

PROVIDING MINI HIGH MAST IN NINE VERIOUS PLACE UNDER EDAMULACKAL GRAMA PANCHAYATH.

Supply, conveyance, installation, testing and commissioning of Hot dipped Galvanised ( internally and externally) seamless,Octagonal pole of overall height 9 Mts with Four arm ring type breaket of 1.5mts length 48mm dia x 3.25mm thick with standard arm cap. The top dia 70 mm, bottom dia 155mm having sheet thickness 3mm. The pole shall be with base plate of 225x225x16 mm and 4 nos required size of foundation bolt. The pole shall be mounted on suitable size oundation (design to be got approved) with 4A SP 'c' curve MCB, loop in loop out terminals block, required dia GI/ PVC pipe shall be provided in the foundation for taking cable in & out from the pole, 3 Core 1.5 sqmm unarmoured PVC insulated round copper cable from loop in loop out to light fixture etc with all required accessories. The cost of the civil foundation is not considered in this item.

Supply, conveyance, installation, testing and commissioning of 110 Watts single piece LED Flood light fittings suitable for roadway installation with pressure die-cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light trasmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge ptotection up to 5 KV, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranted for 3 years from the date of commissioning from any defects in manufactring. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Crompton/ LT)

Earth work excavation in hard soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Cement concrete 1:2:4 using 20mm (nominal size) broken stone for reinforced concrete work (also for earth cover)

Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel (also for earth cover)

63 mm dia PVC pipe (8 Kgf / cm2)

2.50 sq mm 3 run

Supply and providing pipe earthing as per IS 3043 with 3.60 m long 40 mm dia B class GI pipe, GI funnel with weld mesh, filling required quantity of charcoal & salt including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)

3.15 mm GI conductor (10 SWG)

25x3mm GI srtip

25 x 3 mm GI strip

3.15 mm (10 SWG)

25 x 6 mm brass bolt & nut

Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint

Supply & laying of one number 2 core 4 sq.mm PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of 4x10 sqmm sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).

Do 2x4 sq. Mm cable gland

Do 2x4 sq. Mm cable Aluminium socket

4 sqmm-16 sq mm with 12 mm wide x 1 mm thick copper earth clip

Fabrication , supply & Installation of dust and vermin proof wall/ floor mounting metering cubicle construction made from 2.00 mm CRCA sheet as per approved necessary supports made from the same sheet to fix KSEB meters,fuse unit, CT'S compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring

Supply and providing 2 MM size of SMC sheets in the panel as barriers & shrouding using required bolts and nuts including cutting to shape etc., as required.

U' section rubber beeding suitable for 1.60/ 2.00 mm sheet

Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for metering cubicle made out of suitable size , slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.

6 A to 25 A, 10 kA, DP MCB (C curve)

25 A, 2 pole, 100 mA RCCB

Single dial timer unit analog type

2 pole 32 A contactor

Control Relay

32A,415V HRC type kit kat fuse unit

25A HRC fuse link

2 way neutral Link

Aluminium anidised danger nitice board

Satheesh Kumar VR

ADVAITH ASSOCIATES

newtech solutions

AIRMECH AIRCONDITIONING ENGINEERS

Bidder Name

Satheesh Kumar VR

ADVAITH ASSOCIATES

BOSS LIGHT

newtech solutions

AIRMECH AIRCONDITIONING ENGINEERS