PROVISION OF 03 NOS TOILET CUM BATHROOM AT DIFFERENT LOCATIONS AND PROVN OF COMPOUND WALL NEAR BLDG NO P-562 AND P-560 AT ARMY AREA BANAR

Amount

BUILDING WORKS : Surface excavation n. exc 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.

Excavation in trenches n exc 1.50m wide, n exc 1.50m in depth for foundation etc n exc 10 sqm on plan and getting out for in any type of soill complete all as specified.

M&L PCC 1:4:8 type D2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as specified.

M&L for square rubble walling , Jodhpur type regular coursed , well bonded bedded and solidly hearted built in CM (1:6 ) complete all as specified.

M&L for brick work with old size flyash bricks, straight or curved on plan to any redius in half brick thick walls built in cement morter 1:4 complete all as specified.

M&L for RCC M-25 for plinth beams; bases for columns, etc.; basement slabs and mass concrete complete all as specified.

M&L for RCC M-25 for lintel beams, roof beams cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L for RCC M-25 for Chajjas complete all as specified.

M&L for RCC M-25 for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like complete all as specified.

M&L to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished flat surfaces of concrete complete all as specified.

M&L to Formwork to fins, louvers, fascia/chajja etc. rough finished flat surfaces of concrete complete all as specified.

M&L to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces of concrete complete all as specified.

M&L reinforcement TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping staps/lintals and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified.

.-ditto- all as per item No 13.00 above but 6mm to 8mm dia complete all as specified.

.-ditto- all as per item No 13.00 above but 6mm to 8mm dia and over stirrups, spaces and binders complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm of hard/dense soil complete all as specified.

Removing excavated material of soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints , as specified of squared rubble walling , regular coursed with maximum depression on face stone straight held the againest the dressed surface n'exc 20 mm complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra cement) complete all as specified.

M&L for Keyed pointing in CM 1:3 to squared rubble, coursed or uncoursed stone masonry complete all as specified.

M&L for rendering 5 mm thick on ceiling of brick work or concrete surfaces in CM 1:3 complete all as specified.

M&L for rendering screed bed or bedding layer of mortar 20 mm thick in CM 1:3 as in floor to be finished smooth without using extra cement mixed with water proofing compound as per manufacturer instruction complete all as specified and directed.

M&L for Neeru finish to plastering complete all as specified

Supply for liquid water proofing compound for external surfaces 200ml for 50 Kg bag of cement complete all as specified.

M&L for preparation of new plastered surface and applying two coat of cement base paint externally complete all as specified.

M&L for preparation of new plastered surface and applying three coat of white wash on wall internally complete all as specified.

M&L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified.

M&L for moorum/red bajri filling in floors or pavings, spreading and levelling in layers and well ramming including watering as required complete all as specified.

M&L for cement concrete 100mm thick Type D2 1:4:8 (40mm graded aggregate) as in flooring complete all as specified.

M&L for cement concrete 25 mm thick Type B-0 1:2:4 (12.5 mm graded aggregate) as in floorcomplete all as specified.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including screed bed or bedding layer of CM 1:6 in 15 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for coloured glazed ceramic tiles in vertical surface dado and skirting etc 300 x 200 x 7mm thick over and including 10 mm thick rendering CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.

M&L for 75mm thick hardcore broken stone or boulders of gauge exc 63 mm deposited, spread and levelled in layers, watered and rammed to a true surface as in plinth protection complete all as specified.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified.

S&F solid PVC door frame(chowkat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top& bottom rails. Ms MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail& bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and joined together with solvent cement, etc fixed to frame complete all as spd and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink preimer complete all as specified.

S&F for 3 mm thick figure glass glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, and fixed, type C-21 complete all as specified.

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F 125mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.

M&L for 20 mm dia of bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

M&L for 15 mm dia of bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S&F for vitreous china bowl urinal flat back, size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified.

S&F for vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified.

S&F for vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified.

M&L for PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and including flushing pipe 32 mm dia of bore, high density polyethylene pipes of pressure rating 6 kgf/sqcm complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified.

S&F for rotational moulded polyethylene water storage tanks capacity 500 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.

S&F for 20mm dia ball Ball valves high pressure of PTMT with Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 210 gms complete all as specified.

S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F for 15mm dia of bore stop valves/angle cock, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified.

S&F for 15mm dia of bore Bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F for 15mm dia of bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

M&L for Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified.

S&F for 32 mm bore Waste coupling of PTMT (half full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified.

S&F PVC waste pipe 32mm dia complete all as specifed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified.

S&F brass chromium plated Tubular towel rail, 20 mm dia, D type, 60cm long between flanges all as specified.

M&L for 110mm bore PVC (SWR) `P' trap complete all as specified.

M&L for 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified.

M&L for 75 mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified.

M&L for 110 mm bore PVC (SWR) bends any radius complete all as specified.

M&L for 75 mm borePVC (SWR) bends any radius complete all as specified.

M&L for 75 mm dia of bore PVC (SWR) floor trap plain with grating/ grating doom including jointing with solvent cement complete all as specified.

M&L for 110mm PVC (SWR) reducers complete all as specified.

M&L for 75mm dia PVC (SWR) vent cowl complete all as specified.

EXTERNAL WATER SUPPLY : Excavation in trenches n.exc 1.5M in depth and 1.5M wide including getting out in any type of soil complete all as specified.

Returning, filling in including spreading, levelling watering and well ramming in layers n. exc. 25 cm in soil.complete all as specified.

Removing excavated soil to a distance n. exc. 50 meter and deposited where directed at a level n. exc. 1.5 meter above the starting point. complete all as specified.

Cutting /Drilling of CI/GI water pipe line of 100mm bore size and reducting for connection of 50/80mm bore GI/DI pipe with fittings and other accessories complete all as specified.

Supply and laying 25mm bore GI tubing medium grade with all fittings and fixed comple laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified

Supply and fixing 25mm bore Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fitting complete all as specified.

INTERNAL ELECTRIFICATION WORKS : M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with 2 mm thick sunken boxes including 3mm thick laminated sheet cover suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost .

One light point/fan point controlled by one, One-way switch complete all as specified.

One 5 pin 5 Amp Socket outlet point on same board with other switches including earth wire.

All as per item no. 77.00 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board.

S & F piano flush type 5 Amps single pole switch complete all as specified.

S & F multipurpose socket outlet with piano flush type 3 pin 5 Amps all as specified.

S & F switch socket combination 6A/16A, 5 in 1 flush type complete all as specified.

S&F ceiling rose surface type three terminals complete all as specified.

Supply and fixing lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified.

Supply and fixing MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V, all as specified.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

S & F for MCB Single pole rated capacity 20 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC concealed conduit incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

Supply and fixing heavy duty Metal body exhaust fan 300mm sweep, including louvers grounting with nut bolts complete all as specified.

S & F LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate connected to earthing test point all as specified or indicated including testing on completion. Note: Earth shall be tested by the contractor in presence of Engineer-in-Charge and record shall be maintained for ready reference

SEWAGE DISPOSAL WORKS : Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil all as specified and directed.

Returning, filling in including spreading, levelling watering and well ramming in layers n. exc. 25 cm in soil.complete all as specified.

Removing excavated soil to a distance n. exc. 50 meter and deposited where directed at a level n. exc. 1.5 meter above the starting point. complete all as specified.

M&L plain Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in in foundations, filling and mass concete complete all as specified.

M&L PCC 1:2:4 type B-1 ( 20mm graded crushed stone agg.) as in benching, coping and similar work as like including weathering, slightly rounded or chamfered angle and throating complete all as specified.

M&L Cement concrete 1:4:8 type D-2 (using 40mm graded agg.) as in concrete bed to drain pipe including packing under and hunching against the sides of pipe after they are laid and tested for 150mm dia pipe complete all as specified.

M&L 150 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

M&L for brick work with old size flyash bricks, straight or curved on plan exc 6m mean redius built in cement morter 1:6 complete all as specified.

M&L for Cement concrete Type C2 1:3:6 (20 mm graded aggregate) in surface channels , drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.completed all as specified.

Add or deduct for Ser Item No. 101.00 above for each 25 mm girth or part thereof over or under 30cm ditto

M&L Precast reinforced cement concrete 1:2:4 type B-1 (20mm graded agg.) as in landing, cover slabs for manholes etc set in CM 1:6 complete all as specified.

M&L Mild steel TMT bar upto 10mm dia cut to length bent to shape required, including cranking bending spirally and binding with and including mild steel sire (annealed) not less than 0.9mm dia all as specified.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with mixed with water proofing compound as per manufacturer instruction complete all as specified and directed. cement finished fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

Supply only for liquid water proofing compound for external surfaces 200ml for 50 Kg bag of cement complete all as specified and directed.

M&L for provision of RCC hume pipe Septic tanks of 600mm dia and 2000mm long designed to carry sewage and sullage water including earth work in any type of soil 300mm thick mmmm filling , Vent shaft ,manhole opening with cover, connection etc., complete with effective depth of 0.6 mtr for 10 users complete all as specified. Note:- Drg No CEBZ/STR/TD/16/2016 Sheet No 1/1 shall be followed for reference.

M&L for construction of Soakage wells of size 2.4m internal dia of 3m effective depth, excavation in any type of soil, foundation in PCC 1:4:8 , walls of honey combed brick masonary in cement mortar 1:4 with top ring of M-25 concrete including intercepting chamber and screen chamber, RCC cover slab in M 25/ SFRC cover, interconnecting pipes of RCC/DWC including fillings with brick bats of gauge 80mm to 150mm complete all as specified. Note:- Drg No CEBZ/TD/29 Sheet No 2/3 shall be followed for reference.

Compound Wall Work : Excavation in trenches n exc 1.50m wide, n exc 1.50m in depth for foundation etc n exc 10 sqm on plan and getting out for in any type of soill complete all as specified.

M&L PCC 1:4:8 type D2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as specified.

Returning, filling in including spreading, levelling watering and well ramming in layers n. exc. 25 cm in soil.complete all as specified.

Removing excavated soil to a distance n. exc. 50 meter and deposited where directed at a level n. exc. 1.5 meter above the starting point. complete all as specified.

M&L for random rubble walling , un-coursed , well bonded bedded and solidly hearted except stone built in CM (1:6 ) complete all as specified.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary form work complete all as specified.

M&L for keyed pointing in CM 1:4 to squared rubble, coursed or uncoursed or brought upto course in CM 1:4 complete all as specified.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints to squared rubble walling, regular coursed Jodhpur type complete all as specified.

Material and labour for 15mm thick rendering on fair faces in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified.

Material and labour for two coats of cement base paint over one coat of alkali resistance primer on newly plastered surfaces of walls including necessary preparation of surfaces complete all as specified.

S&F mild stelel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railings, framework of water tanks etc and similar works and fixing to wall complete all as specified.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide as priming coat including prepration of newly treated steel surfaces of girth n exc 10cm complete all as specified.

Material and labour for flat iron hold fast and similar work confirming to Fe-290 Gde E-165 complete all as specified.

Material and labour for PCC 1:2:4 type B1 mix using 20mm graded stone aggregate as in hold fast iron fixing including necessary form work and cutting holes complete all as specified.