Supply and Installation of 8 Mtr Mini Mast System with 5 Nos. of 150W LED Flood Lights at Kulathur Grama Panchayath

Amount

90.15.1.1 Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 3/4/5/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters

(90.14.1.2) Supply installation testing and commissioning of Panel board, (90.16.5.3 2) core 10 sq mm Power cable, (od222298/2020_2021) 25A 2 Pole AC 1 rated power Contactor, (2.10.1) 24 hour Timer, (2.14.2) 32A 2-way neutral links, 5-32 A MCB, 40 A RCCB, HRC Fuse 20/32A, 40A isolator,(od222299/2020_2021, 90.6.5.11) multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables - 3 core 1.50 sq mm, (5.3) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long (but without charcoal/ coke and salt ) as required, (90.16.4.2) 25 x 3 mm GI strip, (90.16.1.3) bare earthing conductors 3.15 mm copper conductor ( 10 SWG), (90.16.5.3)copper earth socket 3.15 mm (10 SWG), (90.12.9.2) double wall corrugated (DWC) pipe, (90.1.2)brass compression gland and aluminium lugs 2 X 10 sq. mm (19mm) and all accessories.

90.15.4.9 Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

(2.6.1)Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil, (4.1.8)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size), (5.9.1)Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete, (5.22.6)Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more, (5.1.2)Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size, (13.1.1)12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand), (2.25)Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

od69_P600004/2021_2022 Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc.

od106_P600004/2021_2022 Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt).

S K ELECTRICALS

SOLARVALLEY