SPL REPAIR TO BLDG NO 1-J-18 04 X JCOs MD ACCN AND 02 X TOILETS and BATHROOMS OF OTM-10 N-B, DM 1 and 5) UNDER GE NORTH BINNAGURI

Amount

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed.

S&F of coloured Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile not exceeding 1.0 Sqm, in floor etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile not exceeding 1.0 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed.

M&L for 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting dados repairs to steps complete all as specified and as directed.

M & L for glazed ceramic colour tiles 300X 450 X 7 mm thick as on cup board vertical surface of wall such as skirting, dado, riser etc. in Bath, WC and Kitchen set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and as directed.

M&L for stepping stone flooring or riser/skirting 15 mm thick for staircase step /riser laid over and including 15mm thick (average thickness) cement mortar (1:6) screed bed/plaster and jointed with grey cement slurry mixed with pigment to match the shade of the slab having features of Bull nosing, anti skid, embossed tread lines, high flexural strength, robust, durable,, less than 0.05% water absorption etc complete all specified and as directed.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified and as directed.

All as per item No 08 above but as in skirting ( 12 to 15 mm thick) but on 10 mm thick rendering/ back coating in CM (1:4) complete all as specified and as directed.

Providing holes to cooking platform of size25 mm dia for inserting cooking gas pipe in suitable place complete all as specified and as directed.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 900m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item of this Schedule 'A').

M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M & L for water proofing treatment to RCC roof slab as specified below and as directed:- (a) 10 mm thick cement plaster in CM 1:4 with integral WPC to be laid over the RCC roof slab when the concrete is green. (b) Applying a uniform coat of bitumen primer @ 0.70 kg/sqm over cement plaster. (c) 3 mm thick plain texture and weighing not less than 3.5 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reinforced with non woven polyster matt black finished over compatible primer at 0.4 Ltr / sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torching shall be 150 mm on length side and 100 mm on width side. after necessary preparation of surface complete as per manufacturers instructions. (d) Apply two coats of bitumastic - aluminium paint over the membrane.

M&L for dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed

Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE double layered, cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, complete all as specified and as directed. Note : GI inlet, outlet & wash out pipe will be measured and paid separately.

M&L for plain cement concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms,filling and mass concrete. complete all as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. complete all as specified and as directed.

Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed. Note The serviceable Gi pipe obtained from taking down shall be reused.

Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal to store. complete all as specified and as directed.

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing old 20mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed Note The serviceable Gi pipe obtained from taking down shall be reused.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for applying average 15mm thick plaster in two coats (10+5mm) with readymix pre-packed proportioned dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound on fair faces of brick wall or concrete surfaces additives on extarnal surfaces including transporting of material, mixing, curing, scaffolding etc complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only in relevant item of Schedule 'A'.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed.

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and fair without using extra cement complete all as specified and as directed.

M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying 2 coats of cement based wall putty 1 mm each to wall surface complete all as specified and as directed.

M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and as directed.

Material & Labour preparation of new plastered surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and as directed.

M&L for complete removal of existing surface and Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and as directed.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength not less than 75Kg sqcm, straight or curved on plan exc 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 with 40 mm graded stone aggregate as in sub base to receive a surface complete all as specified as directed.

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair table top wash hand basin , of size not less than 480 x 470x195 mm including 32 mm size brass chromium plated waste coupling all fixing assoseries complete all as specified and as directed.

S & F 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap complete all as specified and as directed.

S&F CP wall mixer for mixing hot & cold water screwed down for iron pipe & fixed complete all as specified and as directed.

S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and as directed

S&F CP toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as specified and as directed.

S&F in repair Bib taps fancy type, long body cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in repair stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed.

S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and as directed

S&F fancy type pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and as directed.

S&F in repair 15 mm bore two way bip taps CP with flage complete all as specified and as direcrted.

S&F CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook in cluding making connections and fixed in position complete complete all as specified and as directed.

S&F in repairs for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S & F Stainless steel Soap dish of approximate size 125mm complete all as specified and as directed.

S&F in repair CP towel ring complete all as specified and as directed.

S&F in repair 1.00 mm thick stainless steel plate rack of size 31"x30"x10" complete all as specified and as directed.

S&F in repair swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed

S& F in repair for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repair 40mm (HDPE) of pressure rating 6 Kg/f/CM2 fixed complete to walls ceilings or in floors etc complete all as specified and as directed.

M&L for salt-glazed stoneware gully traps, square or round mouthed, type `P' 150x100mm complete all as specified and as directed.

Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm dia PVC bends of any radius acess door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door complete all as specified and as directed.

S&F 110mm dia PVC SWR vent cowl complete all as specified and as directed

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutter from the frame) each including Builders Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2.00 Sqm each including Builders Hardware and removing from site complete all as specified and as directed.

S&F factory made Pressed steel frames confirming to IS, having profile of size 125 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed.

S&F factory made pressed steel frames confirming to relevant IS, having profile of size 105 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary Supply & fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S&F of factory made 35mm flush shutter, machine pressed architects veneer designer ply lam both side flush door shutter solid core construction with block board core incl 5mm thick leakwoood lipping alround complete all as specified and as directed.

S&F 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet Strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; ranelling of plain colour PVC sheet to be fitted int the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, but partly glazed i.e. upper panel will be wire mesh fitted externally in the clear space & lower panel will be plain colour PVC sheet 5mm thick complete all as specified and as directed.

S&F for in repair mild steel framed work such as grills, gratings, for fly proof door shutter etc. with ends of bars, hollow sections shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks, or galvanised wire staples etc complete all as specified and as directed.

S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 100 mm butt hinges heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of ex trudeds and fixed complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodised e 150mm long complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed

M&L for cutting holes superficial area n.exc 150 Sqcm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required. complete all as specified and as directed.

Taking down chowkats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each including Builders Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.

S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/ chowkhat of size 45x85 mm coprising of virgin PVC polymer of K value 58-60 (Suspension Grade) , calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) Minimum compressive strength of 58 N/mm2 , modules of eleasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasterners of required dia and lenght complete as per direction fo Engineer-In-Charge (M.S. hold fast/lugs or SS dash fasteners shall be paid for separaterly) complete all as specified and as directed. Note : For WPC solid door/ window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus sides shall be acceptable but no extra payment on this account shall be made.

S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel, supplying & fixing inframe at site as per specification& drawing but 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete all as specified and as directed.

S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and as directed.

S&F aluminium handles 125 mm size cast type anodised complete all as specified and as directed.

S&F in repair stainless steel 25 mm dia curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

M & L for providing & fixing factory made solid PVC cup board / kitchen cabinet frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gauge thickness throughout the frame and metre cut at two corners and jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minium 4 nos of screws to be provided for each vertical memberand minium 2 nos of screws to be provided to the horizontal mmember etc complete all as specified and as directed.

M & L for providing & fixing factory made solid PVC cup board/kitchen cabinet shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardant and having good screw holding capacity including 2mm thick Moulded Prelam PVC Sheet of wooden finish on the front face complete all as specified and as directed.

M&L for providing and fixing factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVC sandwich with 1mm thick plain PVC sheet on both sides suitably fixed in complete all as specified and as directed.

M & L for 75mm hasp and staple safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F 75mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F powder coated Aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.25kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.

S&F powder coated Aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.

S&F anodised Aluminium fixed type without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified and as directed.

Demolition of Reinforced cement concrete of roofs, floors(other than ground floors), beams,slab, staircase, landings, chajjas and similar suspended work complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A1 using 20mm graged stone agreegate as in roofs,floors(other than ground floors), beams, slab, staircase, landings, chajjas and similar like complete all as specified and as directed

Use and waste of formwork to soffits of suspended slabs such as roofs,floors(other than ground floors), beams, slab,staircase, landings, chajjas and similar work all as specified and as directed.

M&L Mild steel TMT bars 8mm to 10mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 in sub base using 40mm graded aggregate complete all as specified and as directed.

M&L for 25mm thick pre-polished and chemically treated anti skid exterior grade double glossy finished coloured chequered tile as in path with grey cement and pigments including 20 mm thick screed bed or bedding layer of cement mortar 1:6 all as complete and as specified and as directed. (Note: Design/pattern shall be as approved by GE at the time of execution)

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete of in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 with 40 mm graded stone aggregate as in sub base to receive a surface complete all as specified as directed.

Supplying & fixing of PVC water storage tank 1000 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms ) . complete all as specified and as directed. Note : (i) GI inlet, outlet & wash out pipe will be measured paid for separately.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or techno commercially equivalent make as listed in list of makes as approved.

M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and as directed.

Supply and fixed in repairs vitreous china wash basin (WHB), white, flat back, size 550 mm x 400 mm (1st quality) including brackets, waste fittings, brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but excluding providing brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed.

S&F vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap front or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding complete all as specified and as directed in repairs including demolition of existing one.

S&F in repair Vitreous China Urinal, Half stall type, white with flush pipe,connecting pipe & waste pipe, CP urinal spreader complete all as specified and as directed.

Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as specified and as directed.

Material & labour factory made solid panel PVC plain colour door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gathers with solvent cement supplying & fixing the frame at site complete all as specified & as directed.

S&F 100 mm butt hinges stainless steel complete all as specified and as directed.

S&F factory made pressed steel windows and ventilators of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gauged shutter including all fittings like MS hold fast, box hinges, Handles , MS Tower Bolts ,Stoppers, hinges, MS stay with long screw, MS spring latch, MS Guard Bar/ grill etc complete with glazing bars including taking down of old windows and one shop coat of zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures. (b) Glass and painting only shall be measured and paid separately under relevant items of Schedule. (c) The Drawings referred above are available in the office of Engr-in-Charge and can be refereed in the office working hours if required.

Description all as per Item No. 128 above but without glazing bars complete all as specified and as directed.

S&F Mild Steel windows or ventilators fixed type with glazing bars including taking down of old steel windows/ventilator of any size as per drag No CESZ/2018/TD-07, sheet 1/3 to 3/3 complete all as specified and as directed

S&F of 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

Supply & fixing 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed for the following :- One light point controlled by one way switch 5/6 Amps.

All as per item No 134 above but one ceiling fan/exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

All as per item No 134 above but one socket out let 5/6 amps point on the independent board complete all as specified and as directed.

All as per item No 134 above but one socket out let 5/6 amps point on the same board complete all as specified and as directed.

All as per item No 134 above but one bell point controlled by one way switch 5/6 Amps complete all as specified and as directed.

All as per item No 134 above but one light point controlled by two way switch 5/6 Amps complete all as specified and as directed.

All as per item No 134 above but but wiring with 2.5 Sqmm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, Two way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of call bell Ding dong, 230 Volt single phase complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and as directed.

S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F IP 20, class I, LED light 1X20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unsv fitting complete all as specified and as directed.

Taking down carefully ceiling fan from its original position and refixing / hanging after B/R plaster work including of ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non-metallic conduit of suitable dia with and including taking down unserviceable sub main, complete all as specified and as directed. Note : Two runs of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F in replacement MCB, triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F in repairs for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and as directed.

M&L for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on and dismantaling of old one complete all as specified and as directed.

Taking out old unserviceable cable of any size carefully from trenches ofter disconnecting electric connection, GI pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note : The Excavation and earth work shall be measured and paid separately under relevant item of Schedule.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 50 sqmm 3.5 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete all as specified and as directed. Note: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A'.

Supply and laying sub class B bricks of old size for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

Laying only old bricks for protection of LT under ground cable complete all as specified and as directed.

M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe of 50mm bore complete all as specified and as directed. Notes : (a) Removal of surplus soil shall be deemed to be include in the unit Rate. (b) GI pipe will be measured and paid separately under relevant item of Schedule 'A'.

M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and fixing of moulded case circuit breaker (MCCB) four pole adjustable type 415 volt, 50 Cycles, 200 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable complete with all accessories complete all as specified and as directed.

Returning, filling in, including spreading leveling watering and well rammming in layers not exceeding 25 cms in depth complete with all accessories complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.

N K Construction (BID ID -3382280)

M/S SHIVNATH SINGH (BID ID -3382782)

M/S PAWAN ENTERPRISE (BID ID -3382586)

M/s. RAMPHAL GARG (BID ID -3382788)

L. B. SHARMA (BID ID -3382513)