REPAIR TO ROAD AND ROAD FURNITURE AT BEACHER ROAD, SP ROAD, ANARWALA, MH AND GHUNGORA UNDER AGE B/R-I OF GE DEHRADUN

Amount

M&L for repair to pot holes of any depth, not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at leat 25mm in depth making good by applying tack coat with bituminous primer @ 5 Kg per 10 Sqm, putting in primixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 sq.m blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including prmixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and directed by Engr-in-Charge.

M&L for preparation of black top surface by brushing with mechanical broomer for removing caked mud etc sweeping with mechanical broomers and finally with air compressors to remove all loose dirt etc, complete all as speicified and directed by Engr-in-Charge.

M&L for preparation of black top surface and applying eveny a priming/tack coat with paving bitumen VG-10 @ 5 Kg per 10 Sqm on bituminous surface complete all as speicified and directed by Engr-in-Charge.

M&L for bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder by weight of total mix, rolled and compacted with vibromatic roller to required camber and gradient complete all as specified and directed.by Engr-in-Charge

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minium 1 to 1.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width with thermoplastic paint (Hot application) white/yellow by indigenous modern proplled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide clacium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directd by Engr-in-Charge.

S&F solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm of height 20 mm with fixing with epoxy. LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge in 8-10 hours including removal of old unserviceable stud complete all as specified and directed. Make : 3M/ TATA/Dark Eye as per IRC-35.

S&F in repair metal delineator of superior ellipsoidal design of height 800mm, base depth 300mm duly powdered coated black pole with 3 White retro reflectors embedded in PCC 1:2:4 type B-1 complete all as specified & directed. Make- 3 M or equivalent as per IRC-79.

S&F cat eye's dual directional reflective of tough poly carbonate of retrofeflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud complete all as specified and directed by Engr-in-Charge. Make : 3M/ TATA/Dark Eye as per IRC-35.

S&F in repair road safety convex mirror made up of polycarbonate reflective and body made of ABS/Fibre/Plastic of max size 80cm dia fixed over and including 40mm bore MS pipe of 2.4 Metre length duly powder coated embedded in PCC 1:2:4 including excavation in earth complete all as specified and directed by Engr-in-Charge. Make : 3M/ TATA/Dark Eye as per IRC-35.

S&F PVC speed breaker (500 x 300 x 50)/500 x 400 x 50)mm etc in black and yellow colour for high visibility with a load capacity of 40 x 45 tonnes compete all as specified and directed.

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3183444)

M/S BRIJPAL SINGH MALIK (BID ID -3183150)

PAWAN KUMAR (BID ID -3188343)

ANANYA CONSTRUCTION CO. (BID ID -3189286)

doon infrastructure (BID ID -3180045)