Development of Jawala Mata Temple Khrew.

Raising of Framed Structure.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.Hard Rock (Blasting Prohibited)

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts, beams ,suspended floors and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand:3graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars Fe-500 Grade or more)

c) 2 X 10 sq. mm + 1 X 6 sq.mm earth wire.

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, pillars, piers, abutments, posts and struts.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Supply and filling of Nallah muck back side of block wall of specified and required size as directed including dressing, ramming watering and carriage of all material involved loading, unloading and stacking complete.

sand+ stone agg 20 mm

5/10 amps switch

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) + Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

3 pin 5/10 amp socket outlet

Providing and fixing glazed shutters doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35 mm thick KD Wood german quality (imported) kail wood

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

6 mm cement plaster to ceiling of mix 1:3(1 cement: 3 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length : in KD Wood of German Quality (imported) complete inclusive of all fittings

Providing and fixing Stainless steel L Drop 250 mm for main door of standard make

Providing and fixing stainless steel handles for windows/ doors 100 mm

Providing and fixing Stainless steel tower bolts with necessary screws etc. complete. :100x10 mm

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and fixing glass panes with putty and glazing clips in doors, windows, clerestory windows, using 4 mm thick glass panes incl. all fixtures complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.25mm thick with 12.5 mm nominal size stone aggregate.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Light shade using white cement

oncrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Wall painting two coats with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 250mm

Painting with synthetic paint on wood work ( one or more coats on New work) of approved brand and manufacturer to give an even shade.

Providing and fixing Stainless steel concealed hinges for almirah shutters of approved make including fittings complete.

Providing and fixing stainless steel handles 150 mm for almirah shutters

Supply and installation of satin finish stainless steel AISI 304 stainless steel handrail and balustrade system having 50mm dia tube handrail (1.5mm gauge) weight 3.70 kg, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at max c/c distance of 600mm complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations, custom bends, as manufactured by Dline or approved equivalent. Height shall be 1050 mm above the finished skirting level

Supply and installation of satin finish stainless steel AISI 304 stainless steel Posts having 100mm dia tube, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at corners complete, as manufactured by Dline or approved equivalent & shall be fixed above the finished level complete as per architectural drawings.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

P/F high rib colour coated sheets of 0.5 mm thickess for roofing including hooks, bolts and nuts 8mm diameter or with PVC. limpet washers complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including ridges/ valleys complete job

Providing and fixing of 19mm thick ply wood (triple layer ply to ply) on wall, almirah complete

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.

Providing and fixing PVC pipe conduit 25 mm for electrical work in all concrete slabs, walls etc including providing / fixing of DB box , lightining/fan and like, complete job as per directions of Engineer in charge

Carriage of materails By Mech.Transport, from source to site of work

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality complete 1 mm thick

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, On steel work

Sand for an avg lead of 15 km

bricks for avg lead 10 km

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels anti skid Granite of any colour or shade, 18 mm

Stone agg. 40 mm for an avg lead of 5 km

Stone agg. 20 mm for an avg lead of 5 km

Bricks

Renovation of Store Room

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :KD wood german quality, 35 mm thick imported.kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.:KD wood german quality, 35 mm thick imported.kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm -40 mm thick. KD wood german quality imported kail wood

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Providing and fixing stainless steel handles for windows/ doors

Providing and fixing Stainless steel tower bolts with necessary screws etc. complete. :100x10 mm

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint (on wood work) of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cement c

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm diafully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above.

Septic and Soakage Pits

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. Hard Rock (Blasting Prohibited)

stone aggregate 40 mm

sand+ stone agg 20 mm

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Head Load of materails By manual labour incl loading unloading and stacking for a lead less than 0.50 km (For 1st 100 Meters)

Providing and laying of stone soling hand packed and compacted with hand ramming including carriage complete.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platforms.

Dry random rubble masonry with hard stone in foundation and plinth:(Nallah) Without bond stone invl. All carriages complete

Carriage of materails By Mech.Transport, from source to site of work

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality complete 1 mm thick

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, On steel work

Sand for an avg lead of 15 km

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels anti skid Granite of any colour or shade, 18 mm

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth etc including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) incl. carriage

Stone agg. 20 mm for an avg lead of 5 km

Gate Pillars

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. Hard Rock (Blasting Prohibited)

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts, beams ,suspended floors and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand:3graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars Fe-500 Grade or more)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing and scaffolding complete job One face dressed Fine chisel dressed

Construction of Brick masonry manholes of size 1'-6" x 1'-6" using 2nd class bricks in 1:6 mix including plastering /CI frame with cover, Complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gates

Carriage of materails By Mech.Transport, from source to site of work

stone aggregate 40 mm

Extra for fine chisel dressed Devri Stone in square or rectangular Pillars

Sand for an avg lead of 15 km

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns etc. for mass concrete.

Stone agg. 40 mm for an avg lead of 5 km

Stone agg. 20 mm for an avg lead of 5 km

Sanitary fittings

Head load of materails By manual labour incl loading unloading and stacking for a lead less than 0.50 km (For 1st 100 Meters)

100mm dia PVC Pipes

75 mm dia PVC Pipes

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge

PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

40-63 Amp DP MCB

Plain bend

Collar

Door Bend

Plain Tee

P Trap

PVC Cliff

Door Tee

Floor Trap

Cowel Cap

PVC Elbow

Space for 12 way MCB's

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 15mm dia. Nominal bore C.P. Brass wall Mixer of standard make weighing not less than 197 gms. Confirming to IS: 8931.

Providing and fixing15mm dia. Nominal bore Plasticized P.V.C. connection pipe with brass union 45 cms Length.

Providing and fixing 15mm dia. Nominal bore C.P. Brass Angle Valve.

Providing and fixing Brass Ball Valve of approved quality complete. (25mm Nominal bore)

Providing and fixing soap cases of C.P. Brass of standard quality

Providing & fixing C.P. Brass Towel rail with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws.

Providing & fixing Stainless Steel Jali (Grating) with or without hole for waste pipe for N. Trap. Weight not less than 70 gms.

Stone agg. 40 mm for an avg lead of 5 km

Stone agg. 20 mm for an avg lead of 5 km

Supply, installation, testing & commissioning of gunmetal male or female threaded isolation control valve( GATE valve),of approved quality confirming to IS 778 PN 10 with necessary specials, unions, nipple etc complete 25mm dia

Providing and fixing CP waste Coupling of approved make

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing of 6" geyser bolts of standard make

Providing and fixing 15mm dia 2"- 3" long CP nipples.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia

Constructing brick masonry manhole in cement mortar1:4 ( 1 cement : 4 coarse sand) , foundation concrete1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 finsihed with a floating coat of neat cement complete as per standard design.Inside size 45x45 cm and 60 cm deep including C.l. cover with frame (light duty) 455 x 455mm.internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

Retaining Wall

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. Hard Rock (Blasting Prohibited)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil :

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Poviding & fixing stainless steel CP cup of approved make.

Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars Fe-500 Grade or more)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.

Providing , installation, commissioning and testing Hot water Geyser of approved make (Venus, Racold, Jaguar or equivalent) and making necessary connections.50 ltr capacity

Carriage of materails By Mech.Transport, from source to site of work

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality complete 1 mm thick

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, On steel work

Sand for an avg lead of 15 km

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns etc. for mass concrete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Electrification

Point

Wiring for group controlled (looped) light point/fan point/exhaust fan point call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC Insulated copper conductor (Polycab/Fenolex/55K/Salzer/equivalent as directed by engineer Incharge) single core cable in surface/recessed PVC condult, as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ Anchor/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit( excluding the cost of conduit), with modular switch ( ABB Tivisha/ Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire, FRLS PVC Insulated copper conductor (Polycab/ Fenolex/SSK/Sabzer/equivalent as directed by engineer Incharge.) single core cable in surface/recessed (cutting the wall and making good the same in case of recessed condult) medium class PVC condult ( Anchor/ Polycab /Ravindra/equivalent make as directed by engineer Incharge.)

15/16 amp switch

Supply and filling of Nallah muck of specified and required size as directed including dressing, ramming and carriage of all material involved loading, unloading and stacking complete.

Wiring for 6-10 amp power plug/ lighting ckt with 2x2.5 sq. mm FRLS PVC Insulated copper conductor (Havell/salzer anchor equivalent as directed by engineer incharge.) single core cable in surface/recessed (cutting the wall and making good the same in case of recessed condult) medium class PVC conduit (Anchor Polycab /Ravindra/equivalent make as directed by engineer Incharge) along with 1 No. 2.5 sq. mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.

stone aggregate 40 mm

Supplying and fixing following modular switch socket Legrand Myllinc /SSK NV/schneider Zencelo /Crabtree athena make) with modular plate and cover Including switch box and connections etc as required.

6 pin 15/20 amp socket outlet

Providing and fixing of 100mm/75mm size of PVC (Standard make) fittings ISI marked approved quality including fittings and fixtures complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

a) 3 X 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete

Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends.

Supply installation testing and commissioning of 18 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux/Wipro make / sample to be approved before installation..

S/F testing and comm. of 36 W + 4 ft. wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver with minimum system lumen efficacy of 100 lm/W with THD<10%. (commercial series) CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V. The Fixture should have in-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips/Trulux/Wipro make / sample to be approved before installation..

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Pol

Supply installation testing and comm. of flood light 100 W (warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegar designed heat sink for efficient thermal management, sturdiness excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07,, with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC, lower THD, toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec-13, IEC60598-1. Preferred make: Philips/ Havell/Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job.

a) 6-32 Amp SP MCB

ycab/ Fenolex/ Anchor/ equivalent as directed by engineer incharge.), single core cable in surface/ recessed medium class PVC conduit as required

S/F Testing and comm. of MCB's of the below mentioned capacities in sub main control legrand Curve Schilder/LAT lequivalent make as directed by engineer Incharge.

Supply, Instalation, Testing and Commlisioning of 1200 mm Sweep ceiling fan with 3 No. Aluminium blades, 30 cm long down rod 2 No canoples, shackle kit, Power Factor not less than 0.9, Service Value anding safery pin, nut bolts, washers, temperature rise-75 degree C Max), Insulation resistance more than 2 mega ohm, suhable for 230 V, 50 Hz, and Including Iron hook complete. USHA Striker/Havells Oyster matalls/Crempion flavla make (sample to be approved before installation).

Supply and fixing modular blanking plates on existing modular switch plates, excluding cost of plates.

Supply Installation testing and commissioning of 400mm wall fan crompton/Usha/havell make.

16 way, Double door (14+2)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board (legrand/ Shinider/A80 make), 240 volts, on surface recess, complete with tinned copper bus bar neutral bus bar, earth bar, dan bar, Interconnections, powder painted Including earthing etc. as required (But Without MCB/RCCB/sclator)

Providing of Chemical earthing as per 15 standards by way digging 2mt. deep pit then embedding 2 metre GJ Earthing electrode, 80mm dia. connecting the plate with main cont board/ floor panels by 10 SWG GJ wire. Full threed brass nut and bolt and washers. Refilling of plt with 2 bags of chemical compound.

Supply Instalation testing and commisioning of Flexible waterproof with 1P68 rating, Silicon made. LED Rope light 6 watt per meter,400 m/ML72 LEDs per Color Warm White/Yellow, along with accessories in surface,usng high brightness SMD LED as the light source suitable for decorative lighting along with sultable LED driver for providing power supply to the LED strip Prefered make : Phillips /Havell/Crompton make.

Engaging of skilled labour Electrician for Dismantling of old damaged materials like wires in scrapt, fixtures swiches-sokets complete as directed by the engineer at site and stacking and handling over to concerned department including carrying out some

Labour

Supply Installation testing and comm, of flood light 30 W (warm white ) Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for effent thernal management, sturiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class1, IP66, IK 07, with high power LED's as light source with Built-in Potted P67 electronic LED driver with APFC lower THD toughned glass and secondary lens, Open Circuit Protection, Over voltage Protection, Surge Voltage Protection upta 10kV With Bull In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598. Preferred make: Philips/ Havel/Wiprs/Crompton make, the Job also includes the angle iron stand of stable se to be grouted in cent concrete with hold fasteners complets job

b) 40-63amp DP MCB

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

S/L, testing and commissioning of PVC XLPE insulated aluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Pan 1) 1988 with upto Date Amendments Havell /Eq. standard make as directed by Engineer incharge and making end termination with brass compression gland and aluminium lugs of redquired size.

(c ) 25sqmm 2 core.

a) 125A 2P MCCB 25 KA including spreader links including spreader links, icu=ics=100% (Adjustable thermal and Adjustable magnetic release) Legrand/Shinider/Semiens /ABB make.

b) 2 No. of Aluminium Bus Bar of 200 Amp.

c)Digital meters and phase indicators -1 set.

d) onload Change over Switch 100 Amp for generator, front operated

e) 2 No. of Aluminium Bus Bar of 200 Amp.