PROVISION OF OFFICERS MD ACCOMMODATION INCLUDING LAND DEVELOPMENT AND SECURITY WALL AT ICGS KAKINADA

Amount

Schedule "A" Part – I to Schedule "A" Part – XIII: NOTE: Schedule "A" Part – I to Part – XII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lump Sum price worked out by the contractor for "BUILDINGS & STRUCTURES", for the lumpsum price of Rs. 7,74,16,350.00 inserted by MES as listed in Schedule 'A' Part - I on Serial Page No. 36 .

Price worked out by the contractor for "EARTH WORK, SITE CLEARANCE AND AREA DEVELOPMENT ", against the price of Rs. 38,06,093.30 inserted by MES as listed in Schedule 'A' Part - II on Serial Page No. 37 .

Price worked out by the contractor for "PILE WORK ", against the price of Rs. 1,58,61,486.40 inserted by MES as listed in Schedule 'A' Part - III on Serial Page No. 38 .

Price worked out by the contractor for "INTERNAL WATER SUPPLY", against the price of Rs. 4,00,732.09 inserted by MES as listed in Schedule 'A' Part - IV on Serial Page No. 40 .

Price worked out by the contractor for "INTERNAL ELECTRIC SUPPLY", against the price of Rs. 6,77,048.68 inserted by MES as listed in Schedule 'A' Part - V on Serial Page No. 42 .

Price worked out by the contractor for "EXTERNAL WATER SUPPLY", against the price of Rs. 2,39,803.29 inserted by MES as listed in Schedule 'A' Part - VI on Serial Page No. 44 .

Price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY", against the price of Rs. 10,59,634.09 inserted by MES as listed in Schedule 'A' Part - VII on Serial Page No. 47 .

Price worked out by the contractor for "AREA DRAINAGE", against the price of Rs. 49,47,692.58 inserted by MES as listed in Schedule 'A' Part - VIII on Serial Page No. 49 .

Price worked out by the contractor for "SEWAGE DISPOSAL", against the price of Rs. 3,75,944.73 inserted by MES as listed in Schedule 'A' Part - IX on Serial Page No. 51 .

Price worked out by the contractor for "ROAD/PATH/HARDSTANDING/CULVERT WORK", against the price of Rs. 84,03,807.03 inserted by MES as listed in Schedule 'A' Part - X on Serial Page No. 54 .

Price worked out by the contractor for "SECURITY WALL", against the price of Rs. 2,03,86,822.39 inserted by MES as listed in Schedule 'A' Part - XI on Serial Page No. 57 .

Price worked out by the contractor for "RAIN WATER HARVESTING WORK", against the price of Rs. 4,60,021.76 inserted by MES as listed in Schedule 'A' Part - XII on Serial Page No. 59 .

Schedule "A" Part - XIII [Miscellaneous Items]

INTERNAL ELECTRIFICATION

Item No 1 : M & L for concealed point wiring on wall/floor/ ceiling etc with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized modular sunken boxes factory made with earth dolly and grid and crown plate and cover plate for fixing of modular switches/sockets/fan regulators, etc with captive steel screw including PVC-FRLS insulated unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing after cutting the chases and making good the surface all as specified and directed by Engineer-in-Charge for the following :-

(a) One light point/security light/ceiling/exhaust/wall mounted fan controlled by one switch

(b) One bell point controlled by one switch

(c) One 3 pin socket outlet , 5 Amps on an independent board controlled by one switch .

(d) One 3 pin socket outlet , 5 Amps on same board controlled by one switch .

(e) One light point controlled by two switches single pole two way

Item No 2 : M & L for concealed point wiring on wall/floor/ ceiling etc with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 4.0 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized modular sunken boxes factory made with earth dolly and grid and crown plate and cover plate for fixing of modular switches/sockets/fan regulators, etc with captive steel screw including PVC-FRLS insulated unsheathed copper multi-stranded conductor of size 2.5 Sqmm, 1100 volts grade for continuous earthing after cutting the chases and making good the surface all as specified and directed by Engineer-in-Charge.

Item No 3 : M&L for 1 X 8/10 watt, Energy efficient BEE 4 Star rated, LED ceiling/wall mounted lighting fixture with Lamp polycarbonate body ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed. MAKE :-Cat-Part No. BN021CLED10S-6500-SUCWGRS1 of PHILIPS or equivalent as approved by AGE(I) as per makes given in the list of makes.

Item No 4 : M&L for 1 X 20 watt , Energy efficient BEE 4 Star rated, LED ceiling/wall mounted lighting fixture with Lamp polycarbonate body ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed. Make : PHILIPS CAT Part No BN021C LED 205 PSU CDLGR or equivalent as approved by AGE(I).

Item No 5 : M&L for 1 X 10/12 watt, Energy efficient BEE 4 Star rated, LED round ceiling/wall mounted lighting fixture with Lamp polycarbonate body ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed. Make : PHILIPS CAT Green LED Ultima or equivalent as approved by AGE(I).

Item No 6 : M&L for 1 X 20 watt, Energy efficient BEE 4 Star rated, LED round/square ceiling mounted lighting fixture with Lamp polycarbonate body ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed. Make : PHILIPS Cirrus mini pro or equivalent as approved by AGE(I)

Item No 7 : S&F LED light fitting mirror type with high output diffuser 500mm, 10/12 Watt, 220 V AC decorative type , 3 module environmental friendly, Energy efficient BEE 4 Star rated, fixed on wall/ceiling pre wired with 1.5 Sqmm copper conductor cable upto connector complete all as specified and as directed. Make : PHILIPS Nebula Code No 31440 or equivalent as approved by AGE(I)

Item No 8 : S&F LED night light, 2/3 watt, 3 module along with sunken boxes and cover plate environmental friendly, Energy efficient BEE 4 Star rated, fixed on wall/ceiling pre wired with 1.5 Sqmm copper conductor cable upto connector complete all as specified and as directed.

Item No 9 : S&F LED Security light, Energy efficient BEE 4 Star rated, fitting with driver of 1X45W, with HF electronic driver pre wired with 1.5 Sqmm copper conductor cable upto connector suitable for 40mm dia pole of GI tubing Med grade bend to shape fixing on wall with suitable MS brackets and clamps complete all as specified and as directed. MAKE :- Cat-Part No. BRP409LED40CWHOMRFGPSUGR of PHILIPS or equivalent as approved by AGE(I) as per makes given in the list of makes.

Item No 9A : Supply and fixing LED decorative light fittings 1x9/10 watt with diffuser 230 volts with LED lamp & holder made of poly carbonate body environmental friendly energy efficient fixed to wall connecting up ceiling rose with three care twisted flexible cable complete all as specified and as directed. Make- Havells model - Floretine WL-1 or equivalen

Item No 10 : S& F ceiling fans AC single phase 230 V of size 1200mm sweep with complete set with fixtures. BEE 5 star rating, metallic body including provision of three core flexible copper wire of size 23/0.0076 from ceiling rose/point wiring to ceiling fan complete all as specified and directed.

Item No 11 : S& F ceiling fans AC single phase 230 V of size 1400mm sweep with complete set with fixtures. BEE 5 star rating, metallic body including provision of three core flexible copper wire of size 23/0.0076 from ceiling rose/point wiring to ceiling fan complete all as specified and directed.

Item No 12 : S& F fan regulator, 120W step type, electronic 2 module complete all as specified and directed.

Item No 13 : S& F Bell Multi Music type AC 230 V complete all as specified and as directed.

Item No 14 : M&L for exhaust fan metallic body with louver, heavy duty 300mm sweep 230 V, Energy efficient BEE 5 Star rated, including connecting up with three core twisted flexible copper conductor cable of suitable size complete.

Item No 15 : M&L for exhaust fan WITH PVC blade with PVC louver, heavy duty 300mm sweep 230 V , Energy efficient BEE 5 Star rated, including connecting up with three core twisted flexible copper conductor cable of suitable size complete. MAKE: Havells Model No VENTILDX or equivalent as approved by AGE(I) as per makes given in the list of makes.

Item No 16 : M&L for wall mounted fan metallic body with louver, heavy duty 400mm sweep 230 V, Energy efficient BEE 5 Star rated, including connecting up with three core twisted flexible copper conductor cable of suitable size complete.

Item No 17 : MCB single pole neutral (SPN), 5-32 amps, 240 volts, 10 KA, 'B' curve with all incoming / outgoing connections with proper size of copper lugs complete all as specified as directed. Note:(i) Cost of copper lugs shall be included in the unit rate.

Item No 18 : MCB single pole (SP), 5-32 amps, 240 volts, 10 KA, 'B' curve with all incoming / outgoing connections with proper size of copper lugs complete all as specified as directed. Note:(i) Cost of copper lugs shall be included in the unit rate.

Item No 19 : MCB TP , 5 to 32 amps, 415 volts, 10 KA breaking capacity, 'C' series with all incoming / outgoing connections with proper size of copper lugs complete all as specified as directed. Note:(i) Cost of copper lugs shall be included in the unit rate.

Item No 20 : MCB TP , 5 to 32 amps, 415 volts, 10 KA breaking capacity, 'C' series with all incoming / outgoing connections with proper size of copper lugs complete all as specified as directed. Note:(i) Cost of copper lugs shall be included in the unit rate.

Item No 21 : RCCB TPN , 100 mA, 415 volts, 40 KA with all incoming / outgoing connections with proper size of copper lugs complete all as specified as directed. Note:(i) Cost of copper lugs shall be included in the unit rate.

Item No 27 : S&F electronic energy meter tamper proof with optical port single phase with LCD display operated on rated voltage of 415V AC supply 50Hz with rated current upto 10-60 A dust and moisture proof with polycarbonate case and sealing provisions for terminal cover and optical port with digital type of display and tamper recording features with self billing capacity with protection level IP-51 conforming to IS-13779 of 1999,) IEC complete all as specified and directed.

Item No 28 : Supplying & fixing factory made meter box tamper proof, shock proof and rust proof of suitable size for single phase meter at Item No.27 (Make: L&T/ HPL/ SECURE/ C&S).

Item No 29 : Supply, installing & Testing Water heater(Geyser with 5 star rating) storage type of capacity 25 litres, 2 KW capacity, glass lined coated inner tank, suitable installation with grouting of Nuts, Bolts and washers of suitable size as recommend by the manufacturer including 2 KW heating element, cable of suitable size as recommended by manufacturer, with 3 pin plug Top of suitable capacity, etc complete all as specified and as directed at site by the Engr-in-charge. Make: V-Guard Model No Steamer Plus EC or equivalent in the makes detailed in list of makes in Particular Specifications.

Item No 30 : BLANK

Item No 31 : Supply and fix MCB DB Sheet metal enclosure double door VTPN 4 way 415 Volts with 200 Amps rated bus bar with MCCB 100 Amps and outgoing MCB of 32 Amps etc complete all as specified and as directed at site by the Engr-in-charge.

Item No 32 : Supply and fix MCB DB Sheet metal enclosure double door VTPN 4 way 415 Volts with 200 Amps rated bus bar with MCCB 63 Amps and outgoing MCB of 32 Amps etc complete all as specified and as directed at site by the Engr-in-charge.

Item No 33 : Supply and fix PVC insulated telephone cable 4P for indoor applications confirming to TEC specification G/WIR06/02, unarmoured 0.5mm ATC etc complete all as specified and as directed at site by the Engr-in-charge.

Item No 34 : Supply and fix PVC insulated co-axial cable for indoor applications for TV complete all as specified and as directed at site by the Engr-in-charge.

Item No 35 : Supply and fix RJ 11 modular telephone socket complete all as specified and as directed at site by the Engr-in-charge.

Item No 36 : Supply and TV socket, co-axial socket 1 module complete all as specified and as directed at site by the Engr-in-charge.

Item No 36A : Material and labour for MCB protected PVC plastic base made with provision of 16 Amp MCB C Curve and with 5/16 Amp sockets with multi plug 16 Amp complete all as specified and divided for ACs & geyser points . complete all as specified and as directed at site by the Engr-in-charge. Make- Havells DBOX or equivalent

INTERNAL WATER SUPPLY

Item No 37 : Supply and fix two way bib cock 155mm bore with flunge cast copper alloy chromium plated , fancy type , screwed for iron pipe brass ferrule etc. complete all as specified and directed.

ROAD/ PATH/ CULVERT/HARDSTANDING

Item No 38 : Road stud (Cat Eye) of size 100 x 100 mm made up of ABS to be fixed with epoxy resin adhesive after cleaning the surfaces complete all specified. Cat-Part No. GPL-01-01 Make: GREENS/GREENLI TE or equivalent as approved by AGE(I),

Item No 39 : M&L M&L sparkle road solar stud with body made of aluminium die cast matt finish with anti-twist ribs on the bottom anchor of size approx. 125 mm x 125 mm x 18 mm & solar battery of 12 V with automatic dusk to dawn solar complete all as specified. Cat Part No. GPL-03-01 Make: GREENLITE or equivalent as approved by AGE(I),

PILE FOUNDATION

Item No 40 : Boring for bored cast in situ piles 450mm dia in any type of soil/clay/soft rock except hard rock/fractured rock and getting out and disposal of spoil to a distance not exceeding 50 M using DMC (Direct Mud Circulation) method complete all as specified and directed.

Item No 41 : Chipping out pile upto cut off level including initial load disposal upto a distance of 50M all as specified and directed.

(a) Compression test

(b) Pull out test

(c) Lateral test

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 44 : Carrying out Pile Integrity Test on 450mm dia piles all as per IS and as directed.

Item No 45 : Boring for bored cast in situ piles 300mm dia in any type of soil/clay/soft rock except hard rock/fractured rock and getting out and disposal of spoil to a distance not exceeding 50 M using DMC (Direct Mud Circulation) method complete all as specified and directed. ( For securuty wall)

(a) Compression test

(b) Pull out test

(c) Lateral test

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 48 : Carrying out Pile Integrity Test on 300mm dia piles all as per IS and as directed.

Item No 49 : MS pile liner fabricated out of 6mm and 8mm thick plain MS plate conforming to FE-410 S by welding, welding the joints, lengthening wherever required, providing stiffners, lifting hooks including all T&P as required, shifting the same from one position to other as required,driving in true vertical alignment in position to the required level for piles complete all as directed by Engr-in-Charge. NOTE : MS pipe liner shall be casted as mentioned in the drawings. However for payment purpose, the depth/height of liner shall be measured up to the cutoff level only irrespective of the depth provided for retaining concrete/bentonite slurry. The unit rate /price quoted shall deemed to include for the same.

SECURITY WALL AND GATE

Item No 50 : Concertina coil streches along with three lines for RBT supporting wire to same material as concertina coil having standard specification along the entire length of wall. complete all as specified and directed.

Item No 51 : M & L for Chain link MS galvanised fencing, including line wire , any mesh, size or type to any type of standard rails, straining bolts etc including provision of binding wire including post holes, concreting, necessary earthwork etc , complete all as specified and directed.

Item No 51A : M & L for AAC Block Gd 2 in security wall straight or curved on plan n.exc 6m radius built in CM 1:6 complete all as specified and directed.

SEWAGE DISPOSAL

Item No 52 : 150 mm dia double wall corrugated pipe (SN4) laid in trenches and jointed incl coupler with rubber rings complete all as directed. Make: ASTRAL or equivalent as approved by AGE(I),

EXTERNAL ELECTRIFICATION

Item No 53 : Supply, install, test & commissioning of transformer confirming to IS 1180 with latest amendments, 5 Star Rated 160 KVA Indoor type step up/down 11 KV/433 Volt copper wound 3 Phase, 4 Wire, 50 Hz, oil immersed naturally cooled with circuit tap changing switch on HT to vary secondary voltage +/- 2.5% to + 7.5% with first fill of transformer oil up to maximum level confirming to IS 335 and all standard fittings including cable box, oil temperature indicator from 0 to 120 degree C winding temperature indicating alarm and trip mercury switch contacts housed in a marshalling box with control cable connections, accessories as per latest IS and as per manufacturers design making necessary incoming & outgoing connections with and including cable end boxes and arrangement as needed for provision at site complete all as specified and as directed by Engr-in-Charge. Make Kirloskar/ Voltamp/Crompton Greaves. The transformer shall be complete with following fittings and accessories:- (a) Oil conservator with filling hole and cap with drain plug. (b) Silica gel breather with oil seal and first filling of dehydrating agent. (c) Pressure release valve with automatic resetting arrangement after release of pressure- 01 set (d) Oil tempreture gauge (indicator) having range (0-120 degree Centigrade)with max reading pointer 100 mm dia with shut off valve between the conservator and main tank. (e) Adequate No of Thermometer pocket including one No for accommodating bulb type Thermometer. (f) Drain cum bottle filter valve.

(g) Top filter valve. (h) Prismatic oil level gauge. (j) Inspection cover (k) Cover lifting Lugs. (l) Jacking and lifting lugs (m) Bi directional plain rollers -04 Nos. (n) Rating and diagram plate. (o) Separate neutral bushing brought out for earthing on LV side. (p) First filling of transformer oil conforming to IS 335-1972 with latest ammendments. (q) One No Air insulated cable box on HV side suitable for XLPE cable (r ) Air insulated plain bus bar terminals for bus connection including jointing materials. (t) Earthing terminals -02 nos located on diagonally opposite transformer tank base. (u) Copper alloy termination studs for connecting cables at HV and LV sides. NOTE :- THE TRANSFORMER SHALL BE BEE 5(FIVE) STAR RATING.

Item No 54 : Supply, installation, testing and commissioning of 100 KVAR rated capacity automatic power factor controller Outdoor kiosk type (APFC) system of ready to use conforming to IS : 8623 and suitable for 415 V, 3 Phase, 50 Hz AC and housed in elegant, fabricated from minimum 2.00 mm thick CRCA sheet with anti-corrosive coating and finally powder coated in texture RAL 7032 and consisting of the following:- Make :- Aplab/Schneider/L&T. (a) Three phase & neutral, aluminiun bus bar having current carrying capacity 300 Amps of suitable size including bus bar epoxy insulators and heat shrinkable PVC sleeve to differentiate the threee phase. (b) A set of heavy duty capacitor 1 Nos of 50 KVAR, 1 Nos of 25 KVAR and 2 Nos. 12.5 KVAR, type MPP-H by using metalised polypropylene technology having total losses less than 0.5 W/KVAR, high overload and frequent switching capability conforming to IS: 2834, IEC 831 capacitors should provided with special sequential pressure sensitive disconnector. (c) TP MCCB 400 Amps 50 KA load adjustable 70% to 100% thermal setting conforming to IS: 13943 to ensure positive isolation with suitable terminations.

Item No 55 : Supply and erecting two poles structure with 02 Nos of Prestressed concrete pole, 11.0 metres long. 152mm x 152mm at top and 152mm x 260mm at bottom, class 9 type 11 M long conforming to IS complete with bolts, nut, & screw all as specified and directed. (a) Excavation in trenches not exceeding 1.5meter wide and 2.0 M deep for pole foundation and getting out in soft loose soil, returning filling in the excavated of the soil after fixing the pole in foundation ramming earth around in layer not exceeding 25 cm thick and disposal of surplus soil to a distance not exceeding 50 meters. (b) M& L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) n foundation 900mm x 600 mm cross section and painting depth 1.5 metre for concrete in casing the pole upto GL all as directed. (c) M& L for providing PCC (1:3:6) type C2 ( using 40mm graded stone aggregate ) for plinth block /collar above GI 2000 mm high and 450 mm dia all as directed and specified. (d) M& L for painting of poles externally with one coat of black bituminous paint (upto planting depth ) and above plinth block concrete collar with two coat of cement base paints of shade as approved by AGE(I) including preparation of surface and painting of 30 cm wide bands 3 Nos. with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5 M above plinth block.

Item No 56 : M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 60 cm in depth for passing of HT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

Item No 57 : Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) with aluminium conductor, 11000 Volts grade suitable for earthed system, of size 95 Sqmm 3 Core complete all as specified and as directed .

Item No 58 : Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm complete all as specified and as directed.

Item No 59 : Supply and fix cable jointing kit for 11 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm complete all as specified and as directed.

Item No 62 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 150 sqmm cross-sectional area, complete all as specified and as directed.

Item No 63 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 120 sqmm cross-sectional area, complete all as specified and as directed.

Item No 64 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 95 sqmm cross-sectional area, complete all as specified and as directed.

Item No 65 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 35 sqmm cross-sectional area, complete all as specified and as directed.

Item No 66 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 4 core, 16 sqmm cross-sectional area, complete all as specified and as directed.

Item No 67 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 4 core, 10 sqmm cross-sectional area, complete all as specified and as directed.

Item No 68 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 2 core, 10 sqmm cross-sectional area, complete all as specified and as directed.

Item No 69 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strip or wire armoured heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade, 2 core, 6 sqmm cross-sectional area, complete all as specified and as directed.

Item No 70 : Supply and fix Polycarbonate cable looping box of size 100 x 100 x 60 mm with connector block 4 Way , including provision for copper shorting strips etc, suitable stainless steel gland and provision for connecting earth continuity conductor etc. all as specified and directed. Make :Hensel Cat No DK 0606 B or equivalent.

Item No 71 : Supply and fix cable route indicator made out of 150 mm round disc of cast iron duly written with HT/11 KV cable properly fixed with nut bolts to angle iron 40X40X5 mm length 60 cms properly grouted in ground at a depth 25 cms with PCC 1:2:4 type B1 using 20 mm graded stone aggregate Size 10X10X10 cm under ground. The angle iron shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed .

DG SET

Item No 73 : Supply, installation, testing and commissioning of silent, Diesel engine driven factory assembled, floor mounted generating set alongwith retrofit emission console device as per CPCB norms, of capacity 12.5 KVA/10 KW at 0.8 power factor or nearest higher size, 3 phase, 4 wire, 50 Hz, 1500 RPM as per IS 10001/10002 to take 10% over load complete with safety control and metering equipments mounted on & including common base frame with acoustic enclosure (canopy), weather proof as per CPCB norms, powder coated all as per manufacturer's instructions manual and all as specified and comprising of the items/ accessories listed hereinafter:- (A) Prime Mover : Directly coupled diesel engine, air cooled suitably de-rated of matching BHP for driving 12.5 KVA/10 KW capacity, alternator electric start, four stroke confirming to latest IS-10001/10002 for continuous running and capable for taking 10% over load for 01 hour complete with following accessories:- (i) Fly wheel to suit flexible coupling. (ii) Flexible coupling with guards. (iii) Air cleaner with filters. (iv) Lubricating oil filter (v) Heavy duty radiator assembly with fan. (vi) Anti-vibration pad as recommended by manufacturers. (vii) PT pump with electronic gevernor of suitable capacity. (viii) Self starter 24 volts DC. (ix) Necessary arrangement for charging battery. (x) Maintenance free battery 12 volts , duly charged -02 Nos, capacity as supplied by manufacturer and as recommended by manufacturer alongwith flexible copper battery lead and connector. Make :- EXIDE/ AMCO/STANDARD as approved by GE/AGE(I).

(xi) Battery rack made out of MS angle iron 40 mm x 40 mm x 5 mm & 150 mm height - 01 No. (xii) Standard safety device. (xiii) Daily services fuel tank for full running capacity of DG set for min 12 hours enclosed within the canopy all as per CPCB with lever indicator inlet, fuel outlet drain plug, air vent and locking arrangements etc including fuel pipe connections with connected GI pipe medium grade from fuel tank to DG set and over flow from the DG set to fuel tank complete with gate valve. (xiv) Exhaust system shall be provided with retrofit emission control device as per CPCB norms shall be provided with thermal insulation by using fire retardant/ non igniting foam conforming to BS-4735 to prevent excess heat radiation on the engine and safety of operator. (xv) Mechanical panel having following accessories :- (aa) Digital Lubrication oil temperature guage - 01 No. (ab) Digital Lubrication oil pressure guage - 01 No. (ac) Digital Water temperature guage - 01 No. (ad) Starting switch with key - 01 No. (ae) Battery voltmeter. (af) Indicator lamp etc. (ag) Digital Ammetar DC-01 No. (ah) Digital RPM meter-01 No. (aj) Safety measures : (i) Low lubricant oil pressure trip. (ii) High coolant temp trip. (iii) Engine over speed trip. (iv) Battery charging alternator. (v) Emergency stop pressed.

(B) Alternator : 12.5 KVA/10 KW at 0.8 power factor, self regulated 3 phase with neutral 415 volts 50 Hz 1500 RPM as per IS : 13364 complete with automatic voltage regulator and foot mounted including making cable connection. The salient feature of alternator are as under :- (i) Voltage regulation under static condition + 1.5%. (ii) Class 'F' insulation. (iii) Permanently lubricating bearing. (iv) Capable to take 10% over load for one hour for every 12 hours. (C) Control AMF Panel : AMF control panel inside the floor mounted acoustic enclosure. Suitable for 12.5 KVA/10 KW DG set with by pass assessment including all necessary operating and control device (to meet the requirement of above capacity plus 25% over load) such as contactors, MCCBs, CT's, volts meter, Ammeter, indicating lamp, frequency meter, energy meter with protection fuses for panel instrument battery charging ststem with indicator and cut off relays low and high oil pressure, high speed over load and earth fault protection, reverse current protection duly wired copper conductor cable and cable connection with lugs/thimbles complete as recommended by manufacturers and as directed.

(D) Repair tools and 2 years maintenance spare parts as per following:- Repair Tools :- (i) Ring spanner set of 10-01 set. (ii) Screw driver 6”, 8”, 12”, 14” & 24”-02 each (iii) Spanner set of 01-01 set. (iv) Adjustable spanner 12” – 04 Nos. (v) Cutting pliers – 01 No. (vi) Techo meter- 01 No. (vii) Tools kit box (only box) – 01 N (viii) 2 Years Spare :- (a) Fan belt set complete - 01 No (b) Lub oil filter - 01 Set (c) Fuel filter - 01 Set (d) Service manual and spare part catalogue with guarantee card (e ) Shock treatment chart dully framed - 01 Set (f) First Aid Box - 01 set (g) Fire extinguisher foam - 01 set (h) Fire extinguisher (electricity ) - 01 set Make - Engine and Alternator :- Refer to PS.

(E) OEM MADE ACCOUSTIC ENCLOSURE :- Acoustic enclosure (canopy) suitable for 12.5 KVA/10 KW DG with the following provisions/ specifications :- (i) The enclosure fabricated out of CRCA sheet of 14 SWG suitable to accommodate the DG Set properly. (ii) The sheet metal components are hot dip seven tank pretreated. (iii) It is pure polyester based powder coated (inside as wall as outside). All nuts/bolts/hardwares are zinc coated with salt spray test as per ASTMB- 117. (iv) Battery is accommodated in a tray in the enclosure. (v) The doors are fitted with gasket with high quality EPON gasket to avoid leakage of sound. (vi) Sound proofing of enclosure is done with high quality rock wool/mineral wool conforming to IS 8131 of 50 mm thickness and density of 96 kg/cum. (vii) The wool is further covered with fiber glass cloth and perforated powder coated sheet, insulation level conforming to UL 94 HF1 class flammability. (viii) A special residential silencer is provided within the enclosure to control exhaust noise. (ix) Specially designed alternators are provided to control sound at air entry to the container and exhaust from the container. (x) Adequate ventilation is provided to meet requirement for combustion and heat removal. If required a blower is used to meet total air requirement and air changes. (xi) Temperature of enclosure does not exceed beyond 50 degree C of ambient temperature. (xii) The enclosure is provided with “high enclosure temperature” safety device. (xiii) There should be provision of emergency shutdown from out side the enclosure. (xiv) There should be arrangement for proper illumination inside the canopy.

EXTERNAL WATER SUPPLY

Item No 74 : Supply, laying, jointing and testing ductile iron pipe spigot and socketed ends, ISI marked, IS 8329-2000 (amended upto date), class K-9 with and including push on joints with internal cement mortar lining and bitumenous coating externally of 150 mm nominal dia complete all as specified and directed.

Item No 75 : Supply and fix Mono block, self priming Centrifugal pump set capable of pumping 425 ltre per min at 30m of metres head conforming to IS- 12469 :1988, coupled directly mounted on fabricated MS base plate, driven by and including electric motor squirrel cage induction suitable for operation on 415 V 3 phase, 50 Hz AC synchronous speed not more than 3000 RPM including copper conductor cable with flexible pipe protection from the panel mounted starter at common supply to pump motor alongwith pressure guage on discharge side, of capacity 7.5 HP complete all as specified and directed by Engi-in-Charge .Make Havells/ Kirloskar/Crompton Greavescomplete all as specified and directed by Engr-in-Charge . Make Havells/ Kirloskar/Crompton Greaves

Item No 76 : BLANK

Item No 77 : Supply and fix Foot Valve Double flanged non-rising stem type cast iron and suitable for pressure rating of PN : 1.6 duly drilled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked conforming to IS 4038, including rubber gasket, nuts, bolts and washers complete all as specified of 80 mm dia complete all as specified and directed by Engr-in-Charge

Item No 78 : Construction of Valve Chamber of size 450 X 450 X 600 mm internal size suitable for Sluice Valve, with PCC 1:4:8, Type D2, using 40mm graded aggregate for foundation, 200 mm thick Brickwork with old size Fly Ash Bricks in Cement Mortar 1:6, 40 mm thick PCC, 1:2:4, Type B1, using 20mm graded aggregate Coping, rendering in CM 1:4, 15 mm thick including provision of Mild Steel Sheet Cover 5 mm thick with 40 X 40 X 6 mm size Angle Iron frame work embedded in concrete with suitable hinges and locking arrangements including two coat of synthetic enamel black paint over a coat of red oxide zinc chrome primer to steel surfaces and including necessary earth work excavation in any type of soil etc., removal of surplus soil off the premises complete all as directed.

EARTHINGS

Item No 80 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm dia GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

Item No 81 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 25x4mm GI earth Strip [Earth Lead] and GI pipe 32 mm bore, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

Item No 82 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

EARTH WORK AND RAIN WATER HARVESTING

Item No 83 : Supply and spreading Moorum/red bajri, good earth (from outside MoD land) and bringing to the site filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Item No 84 : Supply and spreading Hardcore of guage exc 40mm but n exc. 80 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified.

Item No 85 : Supply and filling crushed stone dust, under floor or in foundation in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified.

Item No 86 : Crushed stone filling under floor or in foundation in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified.

Item No 87 : Supply and Fix Rain water Harvesting through DUAL intensity rainwater harvesting filters of 110 bore complete complete all as directed. Make : Rainy FL 150/Rainway or equivalent as approved by AGE(I),

SVS PROJECTS

MANGLA AMIT BUILDERS PVT LTD

SOOD ASSOCIATES PVT LTD

CH.VEERARAGHAVULU CONSTRUCTION PVT LTD