Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹28.8 L+₹69,588 (2.48%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹29.9 L+₹1.8 L (6.36%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹30.9 L+₹2.8 L (9.80%)Rejected-Finance 33 MAHAVEER NAGAR NANDRI ROAD PO SARAN NAGAR JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹3.2 L−₹25.0 L (88.8%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹40.1 L
EMD Value
₹80,120
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Banar
Garrison Engineer Banar, Jodhpur-342027
CERTAIN MISC REPAIR WORKS IN OTM ACCN AT AA BANAR, JODHPUR
2022_MES_546535_1
8822/30/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Banar
₹80,120
Yes
3 Oct 2022
20 Aug 2022
26 Sept 2022
20 Aug 2022
24 Sept 2022
10 Sept 2022
Amount
Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for square rubble walling , Jodhpur type regular coursed , well bonded bedded and solidly hearted built in CM (1:6 ) complete all as specified.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints , as specified of squared rubble walling , regular coursed with maximum depression on face stone straight held the againest the dressed surface n'exc 20 mm
M&L keyed pointing to stone masonary surface in CM 1:4 complete all as specified and directed
Taking down cement plaster in any description from concrete/brick/stone surfaces scrubing down with water etc and its removal from site etc complete all as specified and directed by Engineer-in-Chrage.
M&L for rendering 15mm thick with water proofing compound on other than fair faces of stone masonry surfaces of external wall in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
Supply for liquid water proofing compound for external surfaces 200ml for 50 Kg bag of cement complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of cement base paint (camouflage/normal pattern) externally complete all as specified and directed.
Material and labour for preparation of old plastered or unpastered surfaces of walls including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of cement base paint white or tinted in (camouflage/normal pattern) complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15mm thick on fair faces of stone masonry surfaces of internal wall in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for 1mm thick wall care putty on wall surfaces to prepare the surface even and smooth complete all as specified and directed
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of alkali resistant priming coat complete all as specified and directed by Engineer-in-charge.
M&L for rendering 10mm thick on concrete surfaces in ceiling in CM 1:3 incuding finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.
M&L for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coats of distemper oil emulsion, white or tinted complete all as specified and directed by Engineer-in-charge.
Dismantling boarding, any description, fixed in any position with screws and complete removal of old connecting snap grid and hangers complete all as specified and directed by Engineer-in-charge.
S & F anodised aluminium snap grid frame work for ceiling 605 x 605 mm using aluminium anodised main tee of size 36.5 x 24 x 1.4mm, Cross Tee of size 23.50 x 26.40 x 1.40mm and angle of size 40 x 25 x 2mm including cutting, drilling, jointing etc. Complete including provision of 3.15mm dia GI wire suspenders fixed with adjustable connectors complete all as specified and directed.
Material and labour for gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified.
M&L for 1mm thick wall care putty on ceiling surfaces to prepare the surface even and smooth complete all as specified and directed
M&L for applying two coats of distemper oil emulsion in ceiling, white or tinted complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete un-reinforced in flooring, paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Chrage.
M&L for 50mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3.00 m in length, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Chrage.
Material and labour for 25mm thick PCC (1:2:4) type B-0, using 12.50mm graded stone aggregate as in base concrete to floor finish complete all as specified and directed by Engineer-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar.
Material and labour for 25mm thick PCC (1:2:4) type B-0, using 12.50mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L machine cut Kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) as in flooring over and including 20 mm thick screed bed in CM 1:6 as approved and directed by Engineer-in-Charge.
Dismantling of floor, hearth or wall tiles including cement mortar bedding but not backing and removal of debris/rubbish off the premises complete all as specified and directed by Engineer-in-Charge
M&L machine cut Kota stone 20-25 mm thick in riser of steps, skirting dado and pillar laid over and including 10 mm thick screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) as approved and directed by Engineer-in-Charge.
M&L for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurr and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified and directed.
All as per item No 30.00 but as in skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and directed
M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified and directed.
All as per item No 37 but as in skirting over and includingl 10mm thick rendering in CM 1:4 complete all as specified and directed
M&L for coloured Glazed ceramic tiles in vertical surface 450x350x7 mm thick including laying over and including 10mm thick rendering in CM 1:4 complete all as specified and directed
Taking down chowkats or frames with shutters (W/o taking off shutters from frames) n exc 1.5 sqm each including cutting holes of appropriate size for hold fast complete all as specified and directed.
M&L Solid PVC Door Frame teak wood finish of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & directed
M&L Factory made solid panel of PVC door shutter teak wood finish 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded teak wood colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and teak wood colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of teak wood colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
M&L for 100mm long, extruded stainless steel butt hinges fixed with doors complete all as specified and directed
S&F Aluminum tower bolts of extruded section of size 150mm all as specified and directed.
S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles all as specified and directed.
Taking down chowkats or frames with shutters (W/o taking off shutters from frames) exc 1.5 sqm but n exc 4sqm each including cutting holes of approriate size of hold fast all as specified and directed.
M&L for pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as spd and directed
M&L for pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as spd and directed
S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sided complete all as specified and directed
S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats all as specified and directed.
S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters all as specified and directed.
S&F 150mm size double action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified & directed
S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.
S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.
S&F Aluminium floor door stopper overall length of coverplate 140mm with suitable stops (Double) fixed in wooden door to stop all as specified and directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded all as specified and directed.
S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works all as specified and directed.
S&F factory made steel ventilator with top hung shutter including box type hinges, steel peg stay, complete all as specified and directed.
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane all as specified and directed.
Hacking out old broken glass (any thickness size quality or description from metal frame including punching or drilling our old glazing/springs clips all as specified and directed.
All as per item No 54.00 but Figured glass, pin head type all as specified and directed.
M&L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces of girth exc 10cm all as specified and directed.
M&L one coat of synthetic enamel paint including prepration of old treated wooden surfaces of girth exc 10cm all as specified and directed.
M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm all as specified and directed.
M&L one coat of synthetic enamel paint including prepration of old treated steel surfaces of girth exc 10cm all as specified and directed.
S&F in repair anodised aluminium alloy Harrison rails,mild steel with fixing brackets, stops, rollers etc all as specified & directed.
Taking up or down steel tubing and connection of bore 15 mm all as specified and directed..
S&F 15 mm bore galvanized steel tubing, medium grade, with all fitting and fixed complete concealled/inside of walls celling or laid in floors all as specified and directed by Engineer-in-charge.
S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste cuppling complete all as specifed and directed.
S&F in repair grating doom 100mm dia of stain less steel all as specified and directed
S&F 15mm bib taps cast copper alloy, chromium plated, facncy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish all as specified and directed.
S & F in repair for Vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) completed all specified and directed by Engineer-in-charge.
S&F in repairs 10 ltr PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm all as specified and directed.
S&F in replacement 75mm bore dia cast iron soil, waste and vent pipes, sand cast, in any length with or without ears, with cement joints, laid in trenches or in floors all as specified and directed.
S&F in replacement 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in repair cement concrete type B-1 (1:2:4) all as specified and directed.
S&F in replacement 100mm dia cast iron soil waste and vent pipes ISI marked in any length with or without ears using cement joints fixed in walls all as specified and directed.
All as per item No 74.00 but laid in trenches or in floors
S&F in repairs 100mm dia CI bends (any radious) diminishing pieces or tapers (larger bore shall be measured) with oval access door all as specified and directed.
S&F in repairs 75mm cast iron 'P' or 'S' trap all as specified and directed.
Dismantling of existing water tanks (PVC/RCC/AC) exc 250 ltr but n.exc 500 ltr capacity complete all as specified and as directed.
S&F 500 ltr capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top three layer) hoisted and fixed in position incl 20mm dia bore ball valve PTMT high pressure with polythene float and fly nut complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge
M&L for Chequered cement concrete tiles, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement with pigment in floors laid over and including 15mm thick screed bed in CM (1:6) all as specified and as directed.
M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as spd and directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as spd and directed.
Material and labour for running welding in repairs, thickness of metal to be welded not exc 6 mm thick complete all as specified and directed by Engineer-in-Charge.
Bhawani Enterprises
M/S PIYUSH CONSTRUCTION COMPANY
DIWAKAR CONSTRUCTION CO.
NISHA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .