GE (I) R AND D/CHD-05/2024-25 CERTAIN REPARIS TO JOINERY, CEILING AND MISC WORKS IN SECTOR 24, 37, 38 AND 42 AT CHANDIGARH UNDER GE (I) R AND D CHANDIGARH

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.

All as per serial item no 1.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each -ditto-

Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.

All as per serial item no 3.00 above but exc. 1 Sqm and n.exc. 2 Sqm each -ditto-

Refixing shutters of any description n exc 1 Sqm each in same opening including taking down, Casing and adjusting etc complete all as specified and directed.

Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in same opening including taking down, casing and adjusting etc complete all as specified and directed.

Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1 as required exc one brick but not exc two bricks complete all as specified and directed.

Supply and fixing for factory made solid panel PVC moulded door shutter with particle board core, 30mm thick (style), with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.

All as per serial item no 10.00 above but size 100mm long -dito-

Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed.

All as per serial item no 12.00 above but size 125mm long -ditto-

Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed.

Material and labour for replacement of 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed.

Material and labour for replacement of 18mm thick both side prelaminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour shall be approved by GE)

Supply and fixing in repair 2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13 Sqcm clean sawn wrought, secured with nails or brads complete all as specified and directed.

Supply and fixing in repair continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick complete all as specified and directed.

Supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, complete all as specified and directed..

Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.

Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fixing for steel ventilator with top hung shutter includig hinges steel peg stay, handle complete all as specified and directed.

Supply and fixing for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0 complete all as specified and directed.

Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members complete all as specified and directed.

Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed.

Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed to wooden/streel frame work with tinned tacks or galvanized wire staples complete all as specified and directed.

Supply and fixing in repair mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fasteing and fixing complete fixed in repaircomplete all as specified and directed.

Supply and fixing in repair 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed. (frame work for ceiling shall be measured and paid separately)

Gl frame work in repair seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed.

Supply and fixing for SS fancy type 20 mm dia curtain rods fixed in repairs incl bracket and finial complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and directed.

Supply and fixing for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing in repair 3.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with silicon and oil putty complete all as specified and directed.

All as per serial item no 40.00 above but of thickness 4.8mm -ditto-

Material and labour for wooden frame made of clean sawn wrought 2nd class soft wood (sectional area of fillet exceeding 13 sqcm & not exceeding 25 sqcm), size of frame work not exceeding 1.0 sqm each with and including MS wire gauge of dia 0.56 mm & av aperture width 1.18 mm fixed with necessary wooden/PVC beading as in ventilators/windows

Supply and fixing for of providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.

Supply and fixing for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, 150mm long tower bolt 2 Nos, hinges anodised aluminum snap beading screws etc. complete all as specified and directed.

Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing rubber/aluminium beading where defective and fitted in position complete all as specified and directed.

Supply and fixing in repair hydraulic door closer of aluminium fixed to door shutters of designation 2 complete all as specified and directed.

Supply and fixing in repair 100mm size mortice locks with handle of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed.

Supply and fixing in repairs venation blinds, shear demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed.

Supply and fixing for 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fixing for rubber beading in aluminium doors and windows fixed in repair complete all as specified and directed.

Supply and fixing for aluminium beading in aluminium doors and windows fixed with screw as in repair complete all as specified and directed.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed..

Material and labour for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed

All as per serial item no 53.00 above but except brick -ditto-

Material and labour for PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in bed plates, hold fast ,lacing course coping, bed blocks etc complete all as specified and directed.

Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed..

Material and labour for rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed..

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material surface exc. 10 cm width or girth complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed.

Material and labour for applying two coats of cement based paint on new plastered surfaces including preparation of surfaces complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting and a coat of white primer on walls complete all as specified and directed.

Material and labour for replacement of glazed ceramic digital tiles 300x450x7mm thick coloured/printed as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado over and including 12mm thick cement screeding (rendering) in CM (1:3) with pigment of matching shade complete all as specified and directed.

Material and labour for welding in repairs to windows, door hinges, grills etc exc 2.50 cm but not exc 5cm in length and thickness not exc 6mm complete all as specified and directed.

Supply and fixing for 100 mm and aluminium alloy anodised hinges complete all as specified and directed.

Supply and fixing for of aluminium magnetic door catcher of suitable size for each shutter of cupboard complete all as specified and directed.

GOODWILL ENGINEERS

M/S MATLOOB AHMED