Gram Himmatpur, Tehsil Aonla, Pargana Ballia, Janpad Bareilly mein Van Vibhag ko di gayi bhoomi (7.4048) ki taarbandi, boring evam solar pump lagane ka karya

Excavation in foundation in ordinary soil, foam, clay or sand including lift upto 1.5 m & lead upto 30m Including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation SR 251

Cement concrete with 4 cm. (1%½") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.with 2cm. Gauge grit.SR 2791

First class brick work In 1:4 cement and coarse sand mortar In foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. SR 305

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie roads, gratings etc. (when not Included in an over all rates) wrought to required form, including of supply of steel, bolts, nuts and wastage etc. and its fixing required for proper completion of work. angle iron 50*50*6 mm SR 502 B

Providing and foxing G.1. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete Made of G.I wire of dia 4 mm as per the direction of Engineer-in-charge DSR 16.70.1

Providing barbed iron wire fencing including fixing it to post after stretching it, inciduing labour and T&P etc. required for proper completion of the work, but excluding supply of posts and barbed wire but including cost of clips. DSR 16.18.1

Apply priming coat over new steel and other metal surface after and including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes,fine steel /wood scrappers sand papering and knotting including cost of all materials, labour abd T&P etc required for proper completion of the work. SR 1

Painting first coat over priming coat(but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials labour, T&P etc required for the proper SR 2

BORING WITH SOLAR PUMP Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipment's, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge. upto 90 metre depth below ground level 300 mm dia DSR 23.1.1.1

Boring/drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS. 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level 300 mm dia DSR 23.2.1.1