SR TO ADMIN OFFICE BUILDING AT PORT JAFRABAD (2nd Attempt)

Item No Quantity Unit Amount

book of specifications) figures

Dismantling tiled or stone floors laid in mortar including

ITEM NO.1 stacking of seviceable materials and disposal of unserviceable 635.00 SQM 59

materials with all lead and lift.

Provinding and laying inegrated cement based water proofing

treatment of required thickness over the roof, chaina mosaic

fitting and finally finishing the surfase with white cement

slurry and slopping out tarrace slabs with following

specification laid to required slope not flatter than 1:80 ( the

thickness of water proofing treatment near rainwater outlet

or the lowest point of the finished slope shall not be less then

ITEM NO.02 260.00 SQM 967.32

45mm, including treating the vertical surfase of the parapet

wall up to 20cms . height above finished level of terracing

including finishing the top with joint less water proofing

plaster, curing, testing etc. complete. (No extra shall be paid

for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm. of cement admixed with properly water

proofing compound

Dismantling conforming

doors, windows, to IS -2645

ventilators incl. or

etc. (wood cleaning

the surface before treatment .

shutters including chowkhats, holdfasts and other attachment

ITEM NO.03 (B) Providing and laying 80 mm thick cement concrete 1:5:10 65.00 EACH 249.1

etc. complete and stacking them within

(1-Cement:5-finesand:10-graded brickbatall lead and lift. 40mm

aggregates

i ) Not exceeding

size) and3 curing

sq.m. incomplete

area excluding cost of form

Dismantling

working ( C)doors, After windows,

Two Daysventilators

of properetc. (wood

curing or steel)

applying a

shuttersfloor of cement

including slurry holdfasts

chowkhats, (D) Finishing the surface

and other with

attachment

ITEM NO.04 china mosaic pieces laid on 10mm thick joint less cement 1.00 EACH 330.2

etc. complete and stacking them within all lead and lift.

plaster of mix 1:3(1 cement :3 coarse sand )admixed with

(proprietary

i ) exceeding 3 sq.m.

water in area

proofing compound conforming to IS :2645

Dismantling steel work, including dismembering and stacking

ITEM NO.05 and finally finishing the surface with trowel with neat cement 1448.00 KG 6.4

slurrymaterials

(E) The with

wholeall terrace

lead and solift.

finished shall be flooded with

water for a&minimum

fixing 18periodmm thick

of two first quality

weeks Black Polished

for curring for final

taste. All stone approved tobybe Client/Architect

above operation done in order and foras Doors

and specifiedFrame, Lintel,

by the jambsIn&Charge.

Engineer sill in cement

( The planmortar (1:3)

area shall

ITEM NO.06 including

be measured cutting, fixingvatta

and paid, in cement

shall notpaste

be paidwith hairline joint,

seperatly) SQM 2874.2

filling the joints with white cement / pigments / joint

filler,rounding of edges, edge polishing & finishing as directed

by the Engineer.( fixing the granite in one piece )

Providing 10mm Thick cement plaster in single coat on wall

ITEM NO.07 for Interior plastering up to level and finished even and 145.00 SQM 197.6

smooth in cement Mortar 1:3 (1 Cement : 3 Sand)

Providing and Fixing MS Grills of required pattern to wooden

frames of windows etc. with MS flats at required spacings and

ITEM NO.08 1070.00 KG 138.3

frame around, square or round bars with round headed bolts

and nuts or by screws ( A ) plain grills

Providing and Fixing anodised alluminium section Three track

windows with outer frame 91.5 mm x 31.5 mm of 19G,

weighing 0.92 kg/m and shutter frame 34.5 mm x 15.80 mm

ITEM NO.09 of 19G, weighing 0.38 kg/m with all arrangement for fixing, 37.00 SQM 2900

PVC weather strip, spring handles and other fixtures etc

including fixing 4mm glass of approved quality as directed etc

Providing and Fixing anodised alluminium section Two track

windows with outer frame 61.5 mm x 31.5 mm of 19G,

weighing 0.57 kg/m and shutter frame 34.5 mm x 15.80 mm

ITEM NO.10 of 19G, weighing 0.38 kg/m with all arrangement for fixing, 21.00 SQM 2668

PVC weather strip, spring handles and other fixtures etc

including fixing 4mm glass of approved quality as directed etc

Providing and fixing 35 mm thick Flush door shutters

including fixing 1 mm thick exterior lamination over it on

both sides, peripheral 2 x 3 cm moulding patti with colour,

with Stainless Steel hinges size - 6" x 1.25", dead lock with

ITEM NO.11 18.00 SQM 4545.00

key , SS handle size 30 cm Long, SS Tower Bolt (Stoper) size

20cm long, as per detail including one coat of primer and

two coats of oil painting as and where required, pattern and

design is to be approved by the Architect/EIC.

Providing and Fixing fiber glass moulded door frame,

champhered type of size125 x 65 mm having fire

extinguishing grade FRP skin of 1.5 to 2mm thickness with

extra reinforcement on sides and edges and in "Gel" coat

finish. Remaining hollow portion is to be filled with injected

fire extinguishing grade polyurethane foam (PUF), done in

ITEM NO.12 situ along with embeded wooden peices for stiffening and 49.80 RM 2019.3

taking hinges. In built holdfast arrangement is to be provided

for fixing with masonary or RCC. Whole section is to be

waterproof, weather proof, termite proof and mild acid /

alkali resistant.

Providing & Fixing 35mm thick fiber glass shutter with 1.5 to

2.0mm fire extinguishing grade FRP skin in raised panel

design having extra reinforcement on sides and edges and in

Gel coat finish. The core of shutter is to be filled up with

injected fire extinguishing grade polyurethene foam done in

ITEM NO.13 situ along with embeded wooden pieces for stiffening and 16.38 SQM 4220.9

also for taking hinges and fixtures. the whole shutter is to be

waterproof, weatherproof, termiteproof and resistance to

mild acid / alkali, including SS hinges with necessary screws

and SS fixtures and fastenings.

Providing & Fixing in position collapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size, top and bottom rails of T- iron 40 x

ITEM NO.14 5.25 SQM 8038.8

40 x 6 mm, and 38 mm dia steel pulleys complete with bolts,

nuts, locking arrangements, stoppers handles including

applying a priming coat of red lead paint.

Providing and Fixing glazed louvered glass windows and

ventilators with teak wood frame 10cm x 7cm size including

ITEM NO.15 6.12 SQM 4916.3

coats of oil painting and MS bars 16mm dia. fixed at spacing

not exceeding 100mm c/c etc. complete

Dismantling Old Plaster racking out joint and cleaning the

ITEM NO.16 surface to make ready for new plastering icluding disposal of 652.00 SQM 45.9

rubbish to the dumping ground with all lead and lift

Providing 10mm Thick cement plaster in single coat on wall

ITEM NO.17 for Interior plastering up to level and finished even and 290.00 SQM 197.6

smooth in cement Mortar 1:3 (1 Cement : 3 Sand)

Providing 10mm Thick Cement Plaster in Single Coat on

Ceiling and soffits of stairs for Interior plastering up to floor

ITEM NO.18 61.00 SQM 228

Two level and Finished even and Smooth Cement Mortar

1:3(1 Cement : 3 Sand)

Provindg 20mm Sand Faced Cement Plaster on Walls upto

height 10.0 M above G.L Consisting of 12mm th. Backing Coat

ITEM NO.19 301.00 SQM 477.2

of 1:3 ( 1 Cement : 3 Snad) and 8mm Th. Finishing Coat of

C.M. 1:1 ( 1 Cement : 1 Sand ) Etc. Comp.

Wall painting (two coats) with antifungus exterior water

proffing plastic emulsion paint Light shade (Ultima or

equivalent) of approved brand and manufacture on exterior

ITEM NO.20 wall surface to give an even shade including applying primer 800.00 SQM 143.2

coat as required by manufacturer of paint and thoroughly

brushing the surface to remove all dirt and loose powdered

material including curing etc complete.

Providing and applying plaster of paris putty of average 2mm

thickness over plastered surface to prepare the surfacec even

and smooth. and Wall painting (two coats) with plastic

ITEM NO.21 emulsion paint of approved brand and manufacture on WALL 1452.00 SQM 315.6

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Distempering (two coats) with oil bound washable distemper

of an approved brand and manufacture and of required

shade on CEILING/SLOPING ROOF surfaces to give an even

shade, over and including a priming coat with distemper

ITEM NO.22 404.00 SQM 139.9

primer of approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and other

foreign matter and also including preparing the surface even

and smooth.

Dismantling sanitary fittings like wash basin, W.C. pan (Indian

ITEM NO.23 and European type), flushing tank etc. Including stacking the 20.00 EACH 357.9

materials with all lead and lift.

Providing and Laying polished granamite vitrified tiles of size

600*600mm and 10mm Thick of approved make and Colour

ITEM NO.24 having homogenious materials in flooring laid on 20mm 257.00 SQM 779.1

Thick. Average cement Mortar 1:3 (1 Cement : 3 Course sand )

and pointed with white cement slurry.

Providing and Laying Polished Granamite vitrified tiles of

required size and 8 mm to 10mm thick of approved make and

ITEM NO.25 colour having homogeniouse materials in skirting, dedo etc. 120.00 SQM 952.2

on 10mm thick cement plaster 1:3 (1 cement: 3 coarse sand)

and pointed with white cement slurry.

Providing and fixing wash down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

ITEM NO.26 9.00 EACH 1816.6

Include seat, and cover for wash down water closer with C.P.

brass hinges and rubber buffers. (B) Black plastic seal and

cover.) (A) vitreous China Pattern :(i) in white colour

Providing and fixing two way bib taps of Jaquar : FLR 5041 N /

Cera / Benelave or equivalent make following size complete

ITEM NO.27 9.00 EACH 1601

as directed by EIC / Architect '(A) Brass screw down

bib taps polished bright (i)15mm

Providing and fixing (Simpolo make) sculpture urinal white

glazed urinal basin with white glazed vitreous china, 15 mm

dia C. P. brass concealed stop cock with heavy quality C. P.

brass inlet connection of required length with brass union,

washer and C. P. brass dome and spreaders with C. P. brass

union and clamps, heavy quality c. p. brass bottle trap and

ITEM NO.28 6.00 EACH 2607

concealed connection 32 mm dia G. I. concealed waste pipe

with fittings upto the floor trap / including constructing

channel above finished floor level with required brick work &

P. C. C. work complete including cutting and making good the

walls, RCC work and floor etc., wherever required complete as

directed by EIC/ Architect

Providing & fixing SYNDICATE table top basin 490 L 490W

180H (Simpolo/Hindware/Cera or equivalent make)with single

hole for pillar trap with C.I or M.S brackets, fisher union,

ITEM NO.29 7.00 EACH 3389

rubber plug painted white including sutting holes and making

good the same including fittings complete as directed by EIC/

Providing and fixing Ractangular Mirror of Approved quality

and size 450*350 mm with Plastic moulded frame of

ITEM NO.30 6.00 EACH 316.7

approved make and shade with 6mm thick hard board

Providing & fixing hand shower health faucet of a brass body

ITEM NO.31 with wall hook and 1.5 m hose of Jaquar : ALD : 573 / Cera / 4.00 EACH 1247

Benelave or equivalent complete as directed by EIC/ Architect

Providing and Fixing C.P. Brass towel rail complete with C.P.

ITEM NO.32 Brass brackets fixed to wooden plugs with C.P. Brass screws. 2.00 EACH 566.7

(B) 600 x 20 mm size

Clearing the land by uprooting rank vegetation, grass, bushes,

ITEM NO.33 shrubs, saplings and trees girth upto 300mm, and disposal 391.00 SQM 12.3

upto 1 km. including all labour,tools & plants etc complete.

Removing and refixing avilable Paver block interlocking

cement concrete paver blocks 60mm thick of M40 grade of

approved make and shape including leveling the base with

50mm thick sand bedding, laying the paver blocks in pattern

ITEM NO.34 260.25 SQM 39

as directed by the EIC, filling the joints with sand including

watering, rolling and compacting with appropriate tools and

plants, all conveyance including loading, unloading of blocks

etc.complete in all respect.

Providing and Laying interlocking cement concrete paver

blocks 60mm thick of M40 grade of approved make and

shape including levelling the base with 50mm thick sand

bedding, laying the paver blocks in pattern as directed by the

ITEM NO.35 EIC, filling the joints with sand including watering, rolling and 323.50 SQM 662.8

compacting with appropriate tools and plants, all conveyance

including loading, unloading of blocks etc. complete in all

Mithikhan Or Bhukhra stone (local Soft stone) Masonary in

ITEM NO.36 C.M 1:6 ( 1 Cement : 6 Fine Sand) in Super structure Including 10.00 CUM 5874.8

racking the joint Etc. Parapet Wall

Visitor's Chair (Non-Revolving back, height 17") 4 leg

fabricated stand to be made from 40 x 20 x 16 CRC powder

coated sections.Maxwell nylone caster 50 mm dia

P.U.handles, Seat to be made from 50mm thick sleepwell

ITEM NO.37 10.00 Nos 2320

foam. back to be made from 38mm thick sleepwell foam.

18mm M.S. pipe sructure alongwith helical spring and better

quality of tepastry.

Medium back chair (revolving back, height 21") 5 leg revolving

fabricated stand to be made from 40 x 20 x 16 CRC powder

coated sections, excell nylone castor - 50 mm dia P.U.

handles, seat to be made from 50mm thick sleep well foam.

ITEM NO.38 10.00 Nos 4060

Back to be made from 38mm thick sleepwell foam. 18mm

M.S. pipe structure alongwith helical spring, better quality of

Providing and fixing fully glazed partition using 12mm thk

Modi guard make clear toughened float glass fixed with

necessary patch fittings(Archie/Ozone make), D brackets etc.

As per the manufacturers specification or as directed by the

EIC/Architect. Necessary wooden framing to be erected above

ITEM NO.39 27.93 Sqm 6800

false ceiling. Only visible area to be measured for mode of

payment. Item including of all the taxes, VAT as per the

prevalent rules, materials, transportation,erection of

complete item as directed by EIC/Architect. Service Tax shall

be paid separately as per prevailing rules.

Providing and Fixing chromium plated brass half turn flush

ITEM NO.40 cock of approved quality including fixing in pipe line 21.00 EACH 380.4

complete. ( I ) 20 mm dia

Providing and Fixing C.P. Brass shower rose with 15 mm or

ITEM NO.41 1.00 EACH 326

mm inlet. ( A ) 100 mm dia.

Providing and Fixing to wall ceiling and floor UPVC (Printed ISI

marked) of the following outside dia . low density complete

ITEM NO.42 with special flange compression type fittings, wall clips etc. 50.00 RM 110.3

Including making good the wall ceiling and floor.

(A) 15 mm dia.

Providing and Fixing to wall ceiling and floor UPVC (Printed ISI

marked) of the following outside dia . low density complete

ITEM NO.43 with special flange compression type fittings, wall clips etc. 100.00 RM 140.8

Including making good the wall ceiling and floor.

(A) 25 mm dia.

Providing and Fixing cast iron (spun) nahni trap of the

following nominal diameter or self cleaning design with CI

ITEM NO.44 screwed down or hinged grating including cost of cutting and 13.00 EACH 965.1

making good the walls and floors 100 mm inlet and 50 mm

Proiding and Fixing 15 x 15 cm stainless steel grating for gully,

ITEM NO.45 13.00 EACH 31.3

floor or nahni trap

Providing and Fixing to wall ceiling and floor 6.0 kg f/cm2

working pressure polyethylene pipes (Printed ISI marked) of

ITEM NO.46 the following outside dia. Low density complete with special 25.00 RM 387.1

flange ompression type fittings, wall clips etc. Including

making good the wall ceiling and floor. (C) 110 mm dia

Providing & Fixing to wall ceiling and floor galvanized mild

steel tubes (medium grade ISI engraved marked) of the

ITEM NO.47 66.00 RM 666.6

following nominal bore, tube, fittings and clamps including

making good the wall, ceiling and floor. (F) 50 mm

Painting two coats (excluding priming coats) on new steel and

other metal surfaces with synthetic enamel paint, brushing to

ITEM NO.48 60.00 SQM 106.8

give an even shade including cleaning the surfaces of all dirt,

dust and other foreign matter.

Providing and Fixing solid PVC sheet (Approved make) 5mm

ITEM NO.49 thick false ceiling with butt jointing and brass screws (Frame 280.00 SQM 1020.8

work to be paid separately)

Providing and Fixing anodised aluminium work consisting of

tee/ angle sections, of approved make conforming to IS:

in frames of false ceiling including aluminium angle cleats

with necessary brass screws, aluminium perimeter angles

fixed to wall with rawl plugs at about 450mm c/c and fixing

ITEM NO.50 280.00 SQM 506.2

the frame work to level adjusting hangers ( 6mm dia. MS rods

or any other approved material ) with necessary cadmium

plated machine screws, all as per approved drawing and

directions of EIC.(Approximate weight of aluminium tees and

angles shall be @1.20kg/sqm of ceiling area)

Providing Roller blackout blinds with 3 pass eco blackout

fabric 100% polyster fabric (plain veneer) with pigment PVA -

coating on both side of fabric wid. Dupont black coatery.

Sandwich with roller 38 m mechanism with endless chain and

ITEM NO.51 with installation as per approved Specifications, design and 54.00 SQM 1795

drawings, including of all the taxes, VAT as per the prevalent

rules, materials, ransportation, erection of complete item as

directed by EIC/Architect. Service Tax shall be paid separately

as per prevailing rules.

Providing & fixing Hydrolic door closer with necessary

ITEM NO.52 2.00 Each 1056.9

accessories and screws etc. complete includig all cost.

Providing & fixing in position 18 mm thick mirror polised

ITEM NO.53 telephonic black granite slab for urinal partition machine 2.88 SQM 2321

cut,120 cm heightx60 cm deep.

Providing and fixing paneling made from 50x37mm hard

wood frame at 600x600mm c/c distance clad with 12mm th.

comercial ply with 1.00 mm th. laminate.. Complete with all

necessary hard warw & fittings as per approved model,

ITEM NO.54 109.00 SQM 3,077.00

Specifications, design and drawings, including of all the taxes,

VAT as per the prevalent rules, materials, transportation,

erection of complete item as directed by EIC/Architect.

Service Tax shall be paid separately as per prevailing rules.

Providing & Fixing Chajjja corrougated GI sheets roofing fixed

with galvanised iron J or L hooks,bolts and nuts 8 mm

diameter with bitumen and GI Limpet washers, filled with

ITEM NO.55 28.00 Sq.m 838.8

white lead complete excluding the cost of purlins, rafters and

( I ) 0.80 mm thick sheet

Removing and Refixing Furniture Like, Partition wooden

ITEM NO.56 triellies work and record shifting including frames, with all 2.00 Job 35995.96

lead and lift.

Providing and Laying CC 1:3:6 (1 cement :3 coarse sand :

crushed stone aggregate 20mm nominal size) and curing

ITEM NO.57 53.00 Cum 5487.3

complete including cost of form work in. (A) Wall caps/

coping/foundation/plinth beams

Steel work welded in built up sections, framed work including

cutting, hoisting fixing in position and applying a priming coat

or red lead paint

ITEM NO.58 (A) In beams and joists, channels angles, tees, flats with 6.50 q 11593.3

connecting plates or angle cleats as in main and cross beams,

hip and jack rafters, purlins connected to common rafters

and the like.

PART - A TOTAL

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description of Item (with brief specification and

Item No Quantity Unit Rate In figures Amount

reference to book of specifications)

Dismantling old plaster racking out joints and

cleaning the surface to make ready for new

ITEM NO.1 1093.00 sqm 45.9

plastering including disposal of rubbish to the

dumping ground with all lead and lift.

Demolition and Disposal of unserviceable

materials with all lead and lift.

ITEM NO.2 6.24 cum 898.3

( i i ) Unreinforced cement concrete.

Mithikhan Or Bhukhra stone (local Soft stone)

Masonary in C.M 1:6 ( 1 Cement : 6 Fine Sand)

ITEM NO.3 12.00 CUM 5874.8

in Super structure Including racking the joint

Etc. Parapet Wall

20mm sand faced cement plaster on walls upto

height 10 m above GL, consisting of 12 mm

ITEM NO.4 thick backing coat of C.M. 1:3 (1 cement : 3 fine 1093.00 SQM 477.2

sand) and 8 mm thick finishing coat of C.M. 1:1

(1 cement : 1 coarse sand) etc.comp.

Providing and laying broken glass coping in

ITEM NO.5 40mm thick C M (1:3) layer on top of 89.26 sqm 398.5

walls.including curing etc. complete.

Wall painting (two coats) with antifungus

exterior water proffing plastic emulsion paint

Light shade (Ultima or equivalent) of approved

brand and manufacture on exterior wall surface

ITEM NO.6 1561.20 sqm 143.2

to give an even shade including thoroughly

brushing the surface to remove all dirt and

loose powdered material including curing etc

PART -B Total

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description of Item (with brief specification and reference to

Item No Quantity Unit Rate In figures Amount

book of specifications)

Item-1Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type cubical

panel board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable

1 alley as per requirements & instruction of engineer-in- 2 SQM 10365

charge with erection ofsupplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.(The rates

Item-2Supplying

excludes the costKITKAT pattern porcelain

of switchgears, bus bars,cut-out fuse with

inter connecting

base of following current capacity erected on existing block

mains & Copper Aluminium strips, meters, Fuses etc. The

2 board. 3 EACH 145

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size.(A) locally fabricated

Item-3Providing and erecting Approved make Four pole

panel board

moulded case circuit breaker having breaking capacity ICU

(i) with 350 mm depth

of 35 KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on

3 A.C.supply 50 c/s. with all internal connections, spreader 1 EACH 6637

tinned copper & complete erected in existing 16 G.M.S.

Item-4Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU

of 25 KA. at 415 V,having normal current rating up to 25 A to

4 100A. with Fixed thermal & magnetic release suitable to 3 EACH 4477

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing.Cat-ll

Item-5 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of

MCB to be used)

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door (iv)12 way

Item- 6Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)(i)4 way

Item-7 providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V A.C.

7 system and having breaking capacity 10 KA to be erected in 48 EACH 111

existing box. confirming to IS 8828/1996 with ISI Mark

Item-8 Plastic enclosure fitted with DIN rail suitable for

incorporating Three /Four nos. MCB.

Item NO-9 Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity

(B) 40 Amp.cat III

Item- 10 Approved make Iron Clad or metal clad four pole

change over switch 415V. confirming to IS of following

10 capacity 1 EACH 1263

(B) 32A cat II

Item- 11 Providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 6 KA and suitable

for operation on single phase 240 V. having characteristic of

11 quick action & tripping with all advance feature & do not 2 EACH 1950

incorporate any electronic component.for following Max.

rating erected as directed

(i) 25 Amps.DP Cat-III

Item- 12 Supplying & erecting 20 Amp 10 KA ‘C Curve’

single pole MCB with 20 Amp. Plug socket, company

fabricated powder coated sheet steel enclosure erected as

directed with connection.

[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat-III

Item-13 Providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 6 KA and suitable

for operation on 3 phase and neutral 415V. having

13 characteristic of quick action & tripping with all advance 2 EACH 2611

feature & do not incorporate any electronic component for

following Max. rating erected as directed.

(ii) 40Amps. FP Cat-III

Item- 14 Supplying rubber matting of following thickness as

per IS:15652/IEC

Item- 15 Supplying & erecting ABC powder type 'Ceasefire'

15 type Fire extinguisher as per IS 13849 or 1 Kg capacity with 4 EACH 840

necessary clamp for erection on wall

Item- 16 Providing and erecting metallic vitrified danger

notice board for HIGH VOLTAGE installation to be erected as

per IS.2551

Item- 17Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

17 trench / pipe at road crossing or floor of following size of 80 Mtr 978

(B) 4 core 16 Sq. mm

Item- 18Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

18 directed of following size. 30 Mtr 361

(L) 4 core 6 Sq. mm

Item- 19Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction

Item- 20Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In

(8) Computer RJ-45 socket CAT-III.

Item- 21 Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on

surface on wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth continuity of

21 following type, erected on PVC / Metallic box, single 67 Pt 403

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(c) with oval conduit /PVC casing

capping double lock type erected flushed on wall/ceiling

complete Cat. III

Item-21-A For point wiring in bathroom and W/C and

21-A washbasin area in residential quarters reduce overall rate 18 pt 186

by 50% of point wiring for light.

Item-22Point wiring for secondary light point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling, complete with earth continuity and

necessary connection with primary light with accessories

erected on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.(c) with oval conduit /PVC casing

capping double lock type erected flushed on wall/ceiling

Item- 23 Point wiring for Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC / Metallic box,

23 single mounting base frame covered with textured / metallic 31 pt 255

front plate modules erected on / in wall / ceiling with

following type accssories Cat. III

Item- 24Point wiring for FAN with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on

wall/celing complete with 6A Modular type switch and hum

free EME four or more step type electronic fan regulator

24 with separately mounted and accessories with earth 22 pt 590

continuity of following type erected on PVC / Metallic box,

single mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling as per pipe

erected.with necessary ceiling rose / H.D.Connector as

directed.(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete CAT-III

Item- 25Point wiring for Individual Plug with & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in existing pipe duly

erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.[III] For 16A Plug

with 2-4 sq.mm Cu. Wire(c) with oval conduit /PVC casing

capping double lock type erected flushed on wall/ceiling

Item- 26 Providing & erecting Switch board for Computer

or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with

26 necessary connections as directed 17 pt 1122

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

[B] For Modular Type Accessories CAT-III

Item- 27Providing following type of Modular Type

27 Accessories mounted with pvc / metallic box, single 25 NO 25

mounting base frame covered with textured / metallic front

Item- ,28Mains

moduleswith

1.1 KVwith necessary

grade FRLS PVC connection. As

insulated ISI

marked by Engineer

stranded In charge

Copper (7) Blank

conductor Plate

wire Single Cat-III

in following type of

pipe to be erected concealed in /flushed with wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated

28 stranded wire of green colour for earth continuity of 450 Mtr 82

following size(C) With oval conduit /PVC casing capping

double lock type

(b) 2 wire 2.5 sq. mm

Item- 29Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in existing pipe

erected with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity

of following size(C) with oval conduit /PVC casing capping

double lock type

(a) 2 wire 4 sq. mm

Item- 30 Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings &

30 Junction boxes fixed with adhesive solution & Clamps with 200 Mtr 33

following dia of pipes, in approved manner as directed

30-A Item- 30-A(d) 40 mm 25 Mtr 67

Item- 31Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.)(A) Tube Light with

integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-

Item- 32Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

32 Luminaire efficacy> 85 lumens/watt , 30 EACH 751

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.)(A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV Cat-III

Item- 33 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

33 Luminaire efficacy> 85 lumens/watt , 12 EACH 1087

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.)

(I) Adjustable spot light with COB led having aluminium

reflector of following wattage

(iii) 15 Watts CAT-III

Item- 34 Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

burning hours life, 500 V in built-surge

34 protection,Polycarbonate diffuser, mounting suitable for 18 EACH 187

E14 / E27 / B22 lamp holders, pf >= 0.5. (A) LED Lamps

integral type, with PC diffuser suitable LAMP holder (iii)

to 15 watts CAT-III

Item:-35 Providing & Erecting following Shockproof tissino

35 type accessories erected on 3 mm thick PC (Polycarbonate) 22 EACH 18

sheet in PVC/ Metal Box. erected on wall/ ceiling.(7)

Item- 36ceiling,

Bakelite Providing

rose& erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cms. down rod erected with 24/ 0.2, 3 core flexible wire with

earthing.(Havells, Orient, Crompton, Anchor, Bajaj,Usha)

Item- 37 Providing following type of Modular Type

Accessories mounted with pvc / metallic box, single

mounting base frame covered with textured / metallic front

plate , modules erected with necessary connection. As

desired by Engineer In charge(5) Electronic hum Free four or

more steps EME Fan regulator Cat-III

Item- 38 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted for

fan complete with necessary 24/ O.20, 3 core flexible wire

with earthing.

Item- 39 Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body with

39 inbuilt lowers & square frame. 8 EACH 1687

200mm with 1350RPM Cat.II

Item- 40 Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC bushes, Check-

40 nuts etc. complete of following sizes. 50 Mtr 21

Item- 41 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires of

41 following size to be erected as directed. 50 Mtr 46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Item- 42 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires of

42 following size to be erected as directed. 50 Mtr 77

(h) 2.50 Sq.mm 3 core round PVC sheathed

Item- 43 providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

43 insulated stranded wire of green colour for earth continuity 80 Mtr 135

of following size

(C) with oval conduit /PVC casing capping double lock type

(b) 2 wire 6 sq. mm

Item- 44 Supplying & erecting in earthpit of minimum bore

dia. 225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron galvanising,

44 connection terminal dia of 14 mm with constant ohmic 4 EACH 5785

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications.[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Item- 45 Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device

Item- 46 Supplying & erecting XLPE(IS:7098) (I)-88 ISI

46 unarmoured Aluminium cable 1.1 KV.grade to be erected as 150 Mtr 108

directed of following size.(C) 4 core 10 Sq. mm

Item- 47 Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear

47 terminals with brass/cadmium plated nut bolts in an 20 EACH 6

approved manner.

47-A Item- 47-A (B) 10 Sq.mm 10 EACH 13

Item- 48 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

48 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 8 EACH 6501

lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (iv) Above 90 to 120 watts Cat-III

Item- 49 Providing street light pole bracket comprising main

Light Class MS tube of 4.2 cms. outside dia. complete with

suitable M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5mm. /80 mm or require size pole top having

sufficient fastners for fixing the brackets and having suitable

49 rise as per site condition as directed and spread of 2 8 EACH 721

mtr.with suitable welded stiffener reducer and with lock nut

complete painted with onecoat of Red oxide / PU base

primerand two coats of Aluminium / PU paint. Suitable for

side entry fitting brackets of following nos of arms.[a] Single

Arm bracket 2 Mtr

Item- 50 Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with bakelite connector strip 4way &

50 hinged doors having locking arrangements with mounting 8 EACH 510

clamp with nuts, bolts & washers suitable for erection on

pole with cable clamps& earth bolt of following size of

box.(B) 250X200X100

Item- 51 Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with,

51 floating contacts Minimum switching setup time 1 minimum 1 EACH 3137

& LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

Item- 52 Supplying & erecting power contactor for time

switch complete erected as per direction

[D] 4 pole 440V 40 Amp. Cat III .

Item- 53 Providing and erecting AC-3 duty 3 pole power

contactors spare kits (L & T, C&S, BCH,T.C. Siemens, make).

(b) for 40 A rating

Item- 54 Making trench in Hard murum / Tar Road of

suitable width of 90 cms or required depth for laying cable

or locating the fault all over the run and back filling the

same and making the surface as normal ground.

Item- 54-AIf additional machineries like hammer driller or

JCB use [Add]

Item- 55 Supplying following size of Light duty “A” Class G.I

55 . Pipe & erecting as directed by Engineer-in-charge.(B) 50 40 Mtr 298

Item- 56 Providing & laying. Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable and back filling the same to

make ground as per original.(A)50 mm dia

Item-57 Providing & erecting open well type horizontal

mono block pump set with stainless steel body having

following specification

57 (C) 1 H.P. single phase open well motor pump set suitable 1 EACH 9518

for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm

dia. Delivery pipe with control panel. Cat-III

Item- 58 Supplying and erecting Direct - On - Line Starter

with 18 A. rating contactor and with 3.5 Amp. 18A range

58 directly operated in totally insulated elegant enclosure for 1 EACH 2080

single phase operation up to 3 HP as per IS 13947 complete

erected on P.W. Block with necessary connection. Cat-III

Item- 59 Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚ C within a hour, The water cooler

59 should be comprising of hermetically sealed compressor, 1 EACH 49069

fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel. ◦

Item- 60 Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi,

mention with 40 psi inline typepost carbon filterauto low &

high pressure switches with following size of storage tank &

LPH capacity & erected as directed[B] 25 Ltr / Hr with 30 Ltr.

S.S. Pressure Tank

Item- 61 Providing & Erecting new water level Sensor for

50 Ltr. R.O. System

Item- 62 Providing and erecting approved make split air-

conditioning unit consisting of copper condensing unit with

fan motor, hermetically sealed rotary compressor with

accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder

coated Stand, Eco Friendly green gas charging, 15A plug top

& Remote Control) with necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49)

(c) for 2 ton capacity

Item- 63 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden box,

63 single mounting base frame covered with textured / 1 EACH 493

metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In

Item- 64 PGVCl Load extension charge ((Rate LumpSump

64 (22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit 1 Job 50000

Complete CAT-III

Item- 65 Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring of

following sizes.

(1) 75 mm x 50 mm trunking

TotaL Part-C

PART-A

PART-B

PART-C

I/We am/are willing to carry out the work at… …..% above/below percent(Should be written in figures and words) of the estimated rate

mentionedamount

Estimated above. Amount of my /our tender works out as under.

put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Recovery sheet

Quantity Item Description Rate Per Amount

579.20 Recovery of Steel 33.39 kg

As per item no 5 take 40% of qty

Rate is Considered From MSTC Bulletin)

Total Rs.

Add 18% GST

Add 1 % TCS

Total Rs.

An fix amount of Rs.23,014/- shall be considered as recovery of material obtained from the dismantling of existing structure and shall be

recovered/ deducted from 1st R.A bill or shall be deposited in the GMB NON PLD account by the agency as detailed below.

ACCOUNT NAME GMB NON PLD

BANK State Bank of India, Gandhinagar

Branch GMB Complex, Gandhinagar

Account No