PROVISION OF 01 X 320 KVA GENR INCL AMF PANEL, LT CABLES AND OTHER ACCESSORIES FOR BLDG NO. P-1709 AT KONARK BHAVAN AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 02

Amount

Supply, Erection, testing and commissioning of OEM manufactured static silent (sound proof acoutic encloure) Diesel engine driving generator set capable of delivering 256 KW (320 KVA) DG set shall be water cooled engine @ 1500 RPM coupled with 3 phase, 415 Volts 4 wire system of supply 50HZ at PF 0.8 alternator. mounted on a common base frame along with Fuel Tank, Battery with leads, first fill of lubricating Oil, Engine Safeties & Protections, Anti Vibration Mounting Pads, Standard Control Panel, anti vibration pads, exhaust pipe compete suitable for conditions prevalent to Jodhpur (where work is to be executed) and Acoustic Enclosure as per the CPCB Norms. (75dBA at 1 meter in free field conditions), complete all as specified and directed by Engr-in-Charge. Note :- 1. Capacity of engine, alternator shall be worked out considering all factors. 2.Quoted rates shall be inclusive of PCC foundation for DG set as per OEM specifications leaving 0.5M around the generator for ease of movement and 0.5 M above the ground level. 3. DG set shall comply with CPCB-IV Pollution norms.

Supply, Erection,testing and commisioning of AMF Panel suitable for DG set of capacity 320KVA made of CPRI approved 2.0mm CRCA sheet and powder coated for weather-proof and long lasting finish with Copper Bus bar of capacity 1.5 times the incoming switch gear current capacity. , complete all as specified and directed by Engr-in-Charge. Note:-Panel shall include following items and are demeed to be included in the quoted rates:

Note for item No. 02. 1. Size of the AMF panel are to be worked out based on accessories to be housed in the panel and get approval of Engineer-in-charge. 2. PCC and any other B/R work are included quoted rates.

M & L Earthing complete with galvanized steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanized strip of size 32 mm x 6 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanized iron or steel, drawn into & including galvanized iron pipe of 40 mm diameter medium grade pipe, connected to earthing test point,all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion , including 15mm dia medium grade water pipe excavation and earth work in any type of soil PCC chamber, RCC Cover all as directed by Engineer-in-charge. GI strip of size 32mm x 6mm from Earth pit to LT Panel/ DG set is to be included in quoted rates complete all as specified and directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

Supply, laying and testing cable XLPE Insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400 Sqmm 1 Core complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400 Sqmm 3.5 Core complete all as specified and directed by Engr-in-Charge.

Supply, Erection, testing and commissioning of LT Panel made of CPRI approved CRCA sheet consisting 2x630A Changeover and powder coated for weather-proof and long-lasting finish with Copper Bus bar of capacity 1.5 times the incoming switch gear current capacity. Note :- 1. 2 x 630A changeover switch and bus bar are to be included in quoted rates complete all as specified and directed by Engr-in-Charge. 2. Size of the LT panel are to be worked out based on accessories to be housed in the panel and get approval of Engineer-in-charge. 3. PCC and any other B/R work are included quoted rates.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable of size 300 to 400 Sqmm, Indoor/Outdoor type complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in hard/dense soil, not exc 1.5 mtr wide and n exc 1.5 mtr in depth; for foundation, laying pipes/elect cables etc, and getting out complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed by Engr-in-Charge.

M& L for sand cushioning to underground cable and punning of cushioning of cable 8 cm below cable and 15 cm above cable then gently punned down to a depth of 10cm above the top of cable complete all as specified and directed by Engr-in-Charge. Note :- For payment purpose only punned thickness shall be measured.

SANJOLI CONSTRUCTION COMPANY (BID ID -3107427)

KAVYA ENTERPRISES (BID ID -3107461)

Anil Builders (BID ID -3110657)

RISING ELECTRICALS (BID ID -3110783)

MONA GENERATOR SEVICES PVT. LTD. (BID ID -3111226)

BEYLIM INFRA (BID ID -3124171)

JAGDISH PRASAD & CO (BID ID -3123529)

M/S HARIOM CONSTRUCTION COMPANY (BID ID -3111107)