Repairing of electric wiring, switches, holders, power supply system, digging and laying of underground power supply system, street lights, LP finials etc in estate area residential quarters and non-residential buildings, at O.F. Bhandara.

Amount

S & F of Switch piano flush type single pole one way 5 Amp. Anchor /cona make or its equivalent.

S & F of Switch piano flush type single pole one way 15 Amp. Anchor /cona makeor its equivalent.

S & F of Bell push piano flush type 5 Amp. Anchor /cona makeor its equivalent.

S & F of Socket outlet flush type , 2 in 1, 5 pin , 5 Amp. Anchor/cona makeor its equivalent.

S & F of Socket outlet flush type , 2 in 1, 3 pin , 5 and 15 Amp. Anchor/cona makeor its equivalent.

Fixing in repairs of Switch Socket combination 2 in 1,5A ,flush type Anchor/cona makeor its equivalent.

S & F of Switch Socket combination 5 in 1, 5A/16A ,flush type with fuse & indicator. Anchor/cona makeor its equivalent.

S & F of Lamp holder , PVC /Polycarbonate type with back plate suitable for Angle/batten type.Anchor/CONA makeor its equivalent.

S & F of ceiling rose, 3 phase/PVC / polycarbonate, isolated body as directed by EIC.

Taking down fan,sealing cable end, dismantleing blades and removing fan and blades to store.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for one light point or one fan point controlled by one switch with 1.5 sq mm copper conductor 1100 V grade, FR PVC insulated cable of Polycab/Finolex/HPL/V-guard make or equivalent in PVC conduit with FR PVC insualted 1.0 sqmm copper earthwire & accessories with and as directed by EIC. ( Red /Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for one light point or one fan point controlled by one switch with 2.5 sq mm copper conductor 1100 V grade, FR PVC insulated cable of Polycab/Finolex/HPL/V-guard make or equivalent in PVC conduit with FR PVC insualted 1.5 sqmm copper earthwire & accessories with and as directed by EIC. ( Red /Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

S&F point wiring for one 3 pin socket outlet,15 Amps.Independent with 4 sq mm copper conductor,1100V grade, FR PVC insulated cable of Polycab /Finolex/HPL/V-guard make or equivalent in PVC conduit with FR PVC insualted 4 sqmm copper earthwire & accessories with and as directed by EIC. ( Red/yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for wiring for circuit/submain wiring alongwith earth wire with the 2X 2.5 sqmm+1X1.5 sqmm earth wire sizes of FR PVC insulated copper conductor , single core cable of Polycab/Finolex/HPL/V-guard make or equivalent in surface/recessed in PVC conduit as required. (Red/Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for wiring for circuit/submain wiring alongwith earth wire with the 2X 4.0 sqmm+1X2.5 sqmm earth wire sizes of FR PVC insulated copper conductor , single core cable of Polycab/Finolex/HPL/V-guard make or equivalent in surface/recessed in PVC conduit as required.( Red/yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for wiring for circuit/submain wiring alongwith earth wire with the 2X 6.0 sqmm+1X 4.0 sqmm earth wire sizes of FR PVC insulated copper conductor , single core cable of Polycab/Finolex/HPL/V-guard make or equivalent in surface/recessed in PVC conduit as required .( Red/Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for bell AC,230V.Anchor/Cona make or equivalent

S&F sheet metal enclosure DB for MCBs 4 way 200A bus bar,single phase and neutral with Double Door.HPL/Havells/L&T/C&S make or its equivalent.

S&F sheet metal enclosure DB for MCBs 8 way, 200A bus bar,single phase and neutral with Double Door.HPL/Havells/L&T/C&S makeor its equivalent.

S&F sheet metal enclosure DB for MCBs 4 way,Tripple pole and neutral 415V, Double Door.HPL/Havells/L&T/C&S make or its equivalent.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20A MCB. HPL/Havells/L&T/C&S make or its equivalent.

S&F of rigid non-metalic PVC Conduit exclusive of boxes (junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube end and fixing accessories such as couplers,lock nuts,saddles, pipe hooks etc, size 25 MM.

Fixing in repairs Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

Demolition and dismantling cement concrete (unreinforced) in building pavements, gantries up to 15cms thick. (below or above ground level)

Material and laboure for cement concrete of 1:3:6 of type C-2 using 40mm graded coarse aggregate

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth and getting out in hard dense soil for cable trench

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth and getting out in hard rock/road for cable trench

Returning, filling in, including spreding, leveling , watering and well ramming in layer hard dense soil not exe .25cm

M&L fine sand filling in the trench for cushioning of cable

S&F reinforced precast concrete cable cover,class LV,Type-1,Flat,Size 250 mmX150mmX40mm.

Earthing complete with galvanised steel earth plate electrode 60×60 cm× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead G.I Strip 25X4 mm ( Upto test point 7.5 mtr ) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion as per IS 3043 and as directed by EIC.

Excavation in hard dense soil 1.5 mtr wide & 2.5 mtr deep for earth pits

M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in groun or drawn in conduit/pipe or fixed to pole or any other indicated situation for loop earthing etc. as required 25X4 mm galvanised iron strip

Supply, laying and fixing XLPE Insulated ,PVC sheathed havy duty , G.I Wire/Strip Armoured electric cable with aluminium conductor, 1100 volt grade, size 4 CX 10 sq.mm as per IS 7098 (part-I). GLOSTER/POLYCAB/Havells /UNIFLEX or equivalent MAKE

Supply, laying and fixing XLPE Insulated ,PVC sheathed havy duty G.I Strip/ wire Armoured electric cable with aluminium conductor, 1100 volt grade, size 4 C X 16 sq.mm as per IS 7098(Part-1). GLOSTER/POLYCAB/Havells/UNIFLEX or equivalent MAKE

Supply and Laying GI wire size 4mm dia runing in cable trench.

Supply and fixing of GI pipe medium grade 40mm dia under road/culvert/pole for cable safety with fixing GI clamp.

S& F 1100 V grade heavy duty cable PVC insulated aluminium conductor ,PVC sheath in service connections suspended by insulating hangers not more than 1 metre apart inculding 4 mm suspension G.I wire , twin core flat 6 sq.mm, stranded conductor .Polycab /HPL/Finolex/V-Guard/Johnson/Kalash make or equivalent.

M & L for 9 mtr long steel tubulers swaged poles complete with cast iron based plate, final taper plug, bolts,nuts & screws as per specified type 410 SP -31 including Aluminium painting, and as directed by EIC.

Labour only 9 mtr long steel tubulers swaged poles complete with cast iron based plate, final taper plug, bolts,nuts & screws as per specified type 410 SP -31 including Aluminium painting, and as directed by EIC.

Supply & Fixing of MCB single Pole 5 A to 32 A ,C - series,breaking capacity 10 kA , 240 V HPL/Siemens/Havells or equivalent make

Supply and fixing TPN 40 TO 100 AMP 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning

Supply & Fixing of MCB single Pole & neutral 32 A ,C - series,breaking capacity 10 kA HPL/Siemens/Havells or equivalent make

M & L Wooden / summica board 150X100X40 mm depth

M & L Wooden / summica board 200X150X40 mm depth

M & L Wooden / summica board 100X100X40 mm depth

Fixing in repairs wooden switch boards/hylamp plate mentioned in item no.46,47 & 48

Fixing only of sheet steel inclosure which fuse unit ,TPN,32A,415V.

Replacements of CFL/LED Bulbs/Lamps in any description. (LED Bulbs are to be provided by OFBa)

Fixing only or fixing in repairs of FTL/T-5/LED tube. (FTL/FTL choke/T-5 lamp/Fitting/LED tube are to be provided by Factory)

Fixing only service line /cable for temporary connection or restoring of power supply after tree cutting etc. per connection basis.(Materials are to be provided by OFBa)

Removing of service line /cable for temporary connection/ tree cutting etc. per connection basis.

Changing of fuses /carbon cleaning/connection repair of street light and service line in overhead line per connection

Fixing of copper /Alluminium conductor in overhead line per span per conductor .

Removing of copper/Alluminium conductor in overhead line per span per conductor

Repair of minor fault in LT overhead line like removing twisted conductors jointing of broken conductors etc.

Supply & fixing outdoor type distribution box made out of CRCA sheet metal 2 mm thick on pole 415 V consisting of 1 nos. of 63 A connector and one no. of 6A MCB DP with bottom cable gland plate undrilled, danger sticker 415 V and fixed with rubber gourments.The DB cover will have lockable arrangements. The DB should be of size 300X300X150 mm, GI clamp of 25X5 mm to be provided to fixed the DB on pole.

Removing/Fixing back of any wattage of LED street light fitting. (Material supplied by OFBa).

Removing of Damaged RCC/Steel Tubular pole used for LT overhead line as any description and directed by EIC and shifting back to store.

Fixing /Fixing in repairs MCB in MCB DB of any amperage rating and any pole.

Fixing only Exhaust Fan 12" Sweep , 240 Volts on window with plywood as required and as directed by EIC.

Fixing/Laying only of LT cable from 10 Sq.mm to 70 sqmm on wall by GI saddling/ trench and connection to both ends.(OFBA will be supply materials like Cable, Glands, Copper lugs, Bolts & Nuts)

Fixing/Laying only of LT cable from 95 to 400 sqmm trench and connection to both ends.(OFBA will be materials like Cable, Glands, Copper lugs, Bolts & Nuts)

Supply and Fixing straight through heat shrinkable cable jointing kit suitable for 16 sqmm-50 sqmm XLPE LT cable 4 core. Make REPL/Raychem RPG/3-Mor its equivalent.

Supply & Fixing of LED fitting Driver ,rating 170-240 V,30/45/ 60/90 Watt, Surge Protection 5 KV Suitable for Any manufacturer or as directed by EIC.

RAJESH ELECTRICAL CONSTRUCTION (BID ID -843539)

M B ELECTRICALS (BID ID -844010)

Swati Enterprises (BID ID -844898)