Electrification of Renovated Port Navigational Channel Transit Light Towers

Supply of 4C x 16 Sq.mm size 1.1KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

Supplying and making end termination with brass compression gland and aluminium lugs for following 4C x 16 Sq.mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following upto 35 sq.mm (clamped with 1mm thick saddle) size on wall or surface as required.

Supplying and installation/fixing provision of box for MCB and CBT connectors for 3ph/1ph connections with loop-in and loop-out for terminating 4C x 4 sq.mm branch out 3C X 2.5sq.mm copper cable enclosed in a 260 x 210 x 116 mm thermo plastic polystyrene enclose it should be shock proof safe rust proof IP65 rust proof, dust proof, water proof having internally embedded Gasket with provision for cable entry through IP65 thermoplastic polyamide glands. Work including fixing terminating of a) 32 Amps TPN – 1 Nos b) 6 Amps SP – 3 Nos c) 16Amps DP – 2 Nos with suitable lugs.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 32AMPS TPN.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C" type curve, indicator ON/ OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. a) 6A SP.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C" type curve, indicator ON/ OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. a) 16A DP.

Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End-caps of same materials in existing trench / duct / pole / on wall / on black stone wall with SS saddles with necessary clamps, screws etc. complete as required for drawing the cable. a) 40mm OD / 32mm ID.

Earth excavation for cable trench 0.5 mtr width and depth 0.6 mtr, refilling the cable trench and consolidating and depositing of surplus earth with a lead of 200 mtr etc. complete. a) In Hard Soil.

Removing of heavy weighed concrete slabs and refixing after laying the cable.