WELCOME MAINT / MISC REPAIRS OF MD ACCN AT SECTOR A AND B UNDER GE (A) BARODA

Amount

M&L for Preparation of old decorated surfaces, plastered or unplastered including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls all as specified and directed

All as per item No 1 above but on ceiling.

M&L for Preparation of old decorated surfaces on walls and applying two coats of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surface of ceiling and applying one coat of oil emulsion distemper complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and preparation of surfaces and applying two coat oil emulsion distemper over a coat of primer over and including 1mm to 1.5mm thick wall care putty all as specified and directed.

M&L For Preparing old surface of wall and applying one coat oil emulsion distemper.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

All as per Item No 7 above but on old steel surfaces.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width of girth and applying two coats of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

All as per Item No 9 above but on old steel surfaces

M & L for preparation of old painted wooden and wood based surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and as directed.

M & L for prepation of old painted steel and iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enemel paint (any tint/shade) complete all as specified and as directed

Taking down cement plaster on brick/concrete surface including raking out joints hacking for key scrubbing down with water etc.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 , finished even and smooth (without using extra cement)

M &L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:4 , finished even and smooth (without using extra cement)

M&L preparing new plastered surfaces of wall and applying two coat oil emulsion distemper including priming paint over and including a coat of 1 to1.5 mm thick wall care putty (putty will be paid separately) all as specified and directed

M&L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper all as specified and directed

M& L preparing newly plastered surface of ceiling and applying three coat of white wash complete all as specified and as directed.

M & L for demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,

M&L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises

M&L for Glazed ceramic coloured tiles in vertical surface of size 300x450 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering backing coat on vertical surface of wall 10mm thick in CM 1:4 to receive wall tiles .

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed of mortar 15mm thick for laying floor finishes with CM 1:6

M & L for Virtified Ceramic tiles 9 to 10mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:6

M & L for Virtified Ceramic tiles 9 to 10mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering of mortar 10mm thick for laying tiles with CM 1:4

Demolition of stone slabs and tiles of any description or thickness in floors & walls, laid bedded & pointed in any mortar complete.

S & F powder coated (minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required , with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per the directions of Engineer-in-charge.

S&F Framed work as in doors or gates or grill/grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specifed and directed.

M & L for 20-25 mm thick machine cut green marbel stone as in floor, steps (in single piece), cooking platform, cills of window etc laid over 15 mm thick cement screed in CM 1:4, and jointed with base laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6

S&F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed by EIC

S&F in repairs stainless steel plate rack of size 880x880x220mm, 23 guage thick all as approved and directed

Taking down and refixing in the same opening of shutter of any description n.exc 1 sqm each

Taking down of shutter of any description exc 1 sqm and n.exc 2 sqm each

S & F 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and the other side covered with decorative face veneer

M&L for Teak wood lipping, 3 to 6 mm thick fixed with nail for 18/19 mm thick block board

S & F in repairs factory made 18 (+ 0.7 mm) thick PVC sheet one sided prelaminated sheet cabinate shutters and interior. 18mm (+ 0.7 mm) thick sheet of density 600 kg/m3 bent at 90 degree and finished all edges at all level for making edges, Lipping/bending or 0.5mm thick PVC sheet lipping at ll four edges using bonding tape etc complete all as per directed.

S&F Butt hinges, medium weight, cold rolled mild steel of 100 mm size

S & F Butt hinges, medium weight, cold rolled mild steel of 75 mm size

S&F 150mm aluminium alloy handles cast type anodised all as specified

S&F 100mm aluminium alloy handles cast type anodised all as specified

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 125mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 300 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts.

S&F 250 mm Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts.

S&F 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repairs 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.

S&F in repairs 4.00mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Securing glass of any description in existing wooden frames glazed with putty/beads including removing loose or decayed putty/beads,painting/oiling one coat on rebates, grooves, reputtying and painting /oiling putted surface to match existing work (New length of frame reputitied shall be measured)

S&F 2nd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each

S & F in repairs 25mm dia stainless steel 202 grade tubular curtain rod all as directed by Engr - in Charge.

S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed

S&F in repairs 15mm bore brass bib tap , chromium plated fancy type screwed for iron pipe or brass ferrule complete

S&F in repair 15 mm dia brass Pillar taps, chromium, plated fancy type fixed to iron pipe or brass ferule

S&F in repairs stop valves 15 mm bore, brass chromium plated fancy type with long shank concealed type fixed to iron pipe or for brass ferrule

S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe,125mm dia

S&F in repairs brass CP mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete

S&F in repairs CP Soap dish, fixed to plugs with chromium plated brass screws. Make : Prayag (Cat No BA-45) or equivalent make.

S&F in repair glass shelf (450x150mm) with chromium plated guard complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet (pedestal pattern) and trap white including fixing bolts, WC seat cover , fixed with aluminium or MS chromium plated hinging device complete all as specified.

S&F in repairs PVC water closet seat cover, white colour, closed pattern with flat bottom, and cover andmild steel chromium plated or aluminium hinging device complete all as specified.

S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete.

S&F in repairs toilet jet spray made out of stainless steel flexible tube of 15 mm dia , all as specified and directed

S&F in repairs health Foucet (hand shower) made out of stainless steel flexible tube of 15 mm dia , all as specified and directed

S&F in repairs Vitreous China wash hand basin, flat back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket

M&L in repairs 32mm waste fittings, brass , chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F 40 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repairs for brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges as in repairs.

Taking up or down 15mm bore steel tubing and connections,all as directed by Engr-in-Charge.

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors (concealed on wall/floor including necessary cutting chases) all as directed.

Taking up or down 20mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floor all as directed.

Refixing 20 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc)

Taking up or down 25mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S&F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Refixing 25 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc)

Disconnecting existing tanks of of capacity exceeding 500 Ltr but not exceeding 1000 Ltr , setting aside (or lowering if required) carrying out necessary repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Dismantling water tank and removing to store of exc 250 lit but n exc 500 lit capacity

Dismantling water tank and removing to store of exc 500 lit but n exc 1000 litcapacity

S&F 1000 Ltrs Rotational moulded triple layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I IS 12701-1996.

S&F 500 Ltrs Rotational moulded triple layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I IS 12701-1996.

S&F as in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screw-wed for iron pipe or brass ferrule and fixed

Taking down PVC/CI pipe of any pattern size including all fittings etc. and cleaning for refixing or removal outside MD land

S&F in repair 100/75 mm dia CP grating with hole or without hole fixed to existing NT/FT.

S & F 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed.

S&F 110mm dia PVC SWR pipe single socketed in any length with rubber ring joints fixed to walls

S & F in repairs 110mm dia PVC SWR bend with oval access door

Weldings in repairs length exc 2.5 cm but n exc 5cm thick of metal to be welded thickness of metal welded exc 20mm n exc 25mm.

M& L for Polishing /cutting to existing terrazo/kota stone flooring with filling joints including, cleaining the surface complete as specified and directed by Engr-in - charge

S & F in repairs 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed

repairs to joinery works such as easing of doors, windows, kitchen cabinets, refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentry works assigned by the Engineer in Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately).

repairs to plumbing/internal water supply works such as repair to leaking taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engineer in Charge. (Note : Replacement of fittings and fixture like bib tap, pillar tap etc, if required shall be measured and paid separately).

S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

S&F in repairs EWC anti microbial seat cover hygenic type for padestral pattern complete all as specified and directed.

S&F in repairs Chromium plated toilet paper holder.

S&F in repairs mild steel helical door spring 150mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete.

S&F in repairs mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete.

S&F in repairs door sill of any size made up of rubber at the bottom and top is of aluminium sheet including screwing to protect from rats, snakes etc. complete all as specified and directed.

S&F in repairs, magnet door stopper of size round or rectangular including all fittings fixed complete all as specified and directed.

S&F in repairs, chromium plated peg set for hat and coat hooks including all fittings fixed complete all as specified and directed.

S & F SS W Hinges SS 202 Grade steel Rust Resistance , for fixing cup boords shutters sizes of hinges 3" to 4" and 1.5 mm thickness, suitable for 18 mm thick cabinets shutters complete all as specified and directed

S&F in repair 18mm thick HDHMR BOARD exterior grade including any coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century.

S&F in repair 18mm thick HDHMR BOARD exterior grade including white coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century.

S&F in repair stainless steel cabinet/drawers handle having a length of 250mm and shape all as specified and directed.

S&F in repairs SS 304 Cup & Saucer basket of size 470x485x100mm corrosion resistance to be fixed to telescopic drawer channel all as specified and directed. Make: cat part no 5913 of Godrej or equivalent model in KAFF/Hettich.

S&F in repairs SS 304 Perforated cutlery basket of size 470x485x100mm corrosion resistance to be fixed to telescopic drawer channel all as specified and directed. Make: cat part no 5914 of Godrej or equivalent model in KAFF/Hettich.

S&F in repairs SS 304 Three shelf pull out of size 200x485x530mm corrosion resistance to be fixed to telescopic drawer channel all as specified and directed. Make: cat part no 6172 of Godrej or equivalent model in KAFF/Hettich.

S&F in repairs SS 304 Grain trolly of size 525x485x350mm corrosion resistance to be fixed to telescopic drawer channel all as specified and directed. Make: cat part no 6175 of Godrej or equivalent model in KAFF/Hettich.

S&F in repairsThali Plate basket SS 304- 21*20 of size 8- 520x485x150mm all as specified and directed. Make: cat part no 6168 of Godrej or equivalent model in KAFF/Hettich.

S&F in repairs Plain Basket SS 304 of Size 470x485x200mm corrosion resistance to be fixed to telescopic drawer channel all as specified and directed. Make: cat part no 5912 of Godrej or equivalent model in KAFF/Hettich. NOTE :-- For Sr No 110 to 116 Drawer channels will be measured and paid seperately

S&F in repairs Ball Bearing drawer channel 250mm of size all as specified and directed and approved by GE.

Shree Vaishno Enterprises (BID ID -3256888)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3256471)