SPECIAL REPAIR TO JCOs OR MD ACCN QTR NO P-73-6, P-73-4, P-136-01, P-69-03 AT CHORD LINE AND QTR NO T-43-6, T-43-5 AND T-36-4 AT MU CAMP, ESD KANKINARA AND PROVN OF FOUR WHEELER SHED AT JCOs OR MD ACCN(BLOCK NO P-29) AT MU CAMP, 507 ABW KANKINARA UN

Amount

Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall by Vacuum based sanding machine , applying wall care putty 1 mm thick (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller as per manufacturers instructions complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nail etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller as per manufacturers instructions complete all as specified and as directed.

Materials and labour for rendering 20 mm thick, in cement mortar (1:4) in two layers, each 10mm thick, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified and as directed (WPC shall be measured and paid separately).

Material and labour for preparation of newly plastered surfaces of wall by Vacuum based sanding machine, and applying two coats of Anti Fungal Piant white or coloured by Auto Roller as per manufacturers instructions, including primer and necessary scaffoldings complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nail etc & filling cracks/hole with putty, and applying two coats of Anti Fungal paint white or coloured by Auto Roller as per manufacturers instructions, including necessary scaffoldings complete all as specified and as directed.

Supply only integral water proofing liquid admixture for concrete and mortar complete all as specified and as directed. (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Supply and fix anodised aluminium frame for doors,windows,ventilators(including 2/3 track) with one or more rebated including jointing cleat for fixing etc.complete all as specified and as directed.

Supply and fix sliding aluminium anodized glazed shutter for sliding window/ventilator with aluminium channel section weighning not less than 0.55 Kg per sqm including aluminium cleat,roller rubber neoprene packing/gusket etc complete all as specified and as directed.

Supply and fix sliding aluminium anodized wiremesh shutter for sliding window/ ventilator with aluminium channel section weighning not less than 0.55 Kg per sqm including aluminium cleat, roller rubber neoprene packing/gusket etc complete all as specified and as directed.

Supply and fix aluminium designed grill for windows including jointing cleat for fixing etc complete all as specified and as directed.

Supply and fix Stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and as directed.

Supply and fix in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, conforming to IS, fixed with stainless wire staples with steel wire staple with steel window or wooden door and window. complete all as specified & directed.

Supply and fix in repair 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete all as specified and as directed.

Taking down chowkats with shutter n.exc. 1.50 sqm each (without taking off shutter from the frames) complete all as specified and as directed .

Taking down chowkats / steel frames with single or double shutter (without taking off shutter from the frame) exc 1.50 sqm and not exc. 4.00 sqm in each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and n exc 2.0 Sqm each complete all as specified & directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (single panel) without lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Supply and fix 2nd class hard wood , plain, solid , straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified and as directed.

Supply and fix 100mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

M&L for preparing new wood & wood based surfaces of any descriptions exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles 300x 450x 7mm as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour for light shade vitrified tiles 8 to10mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floor set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.

Material and labour for light shade vitrified tiles 8 to10mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

M&L for pre polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, laid over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, rounding edge and polishing complete all as specified and directed.

M & L for providing 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor, finished the surface even and smooth with using extra cement complete all as specified and as directed.

Supply and fix in repairs vitreous china wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain and plug and porcelain stopper, waste pipe etc. complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified & as directed.

Supply and fix in repairs stainless steel sink without drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantilever brackets connecting union overall size 495x420 mm with bowl size 408x352x178mm or 405x355x178mm complete all as specified and as directed.

Supply and fix in repair stainless steel kitchen Plate Rack of size 24''x36''x10'' complete all as specified and as directed.

Supply and fix in reapir vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed

Supply and fix in repair Vitreous china wash down water closet pan, semi pedestal pattern (Anglo Indian Type), white including plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for Anglo Indian type pedestal pan (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 600mm long between flange, fixed with chromium plated brass screws complete all as specified & directed.

Supply and fix in repairs 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Supply and fix in repair fancy type drapery curtain rod bracket complete all as specified and as directed.

Supply and fix in repair brass chromium plated curtain rods of 20mm dia complete all as specified and directed.

Supply and fix in repair soap dish, vitreous china white, approximate size 160x160x90mm and fixed in position complete all as specified and directed.

Supply and fix in repairs brackets for WHB and Sink made out of 20mm bore GI pipe, medium grade, 600mm long and embeded into the wall with PCC (1:3:6) type C1 complete all as specified and as directed.

Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and directed.

Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 2mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction complete all as specified and directed.

Supply and fix of 4mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.

Supply and fix in repair 15mm bore bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair 15mm bore Pillar tap (Minimum weight 110gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair shower with shower arm of PTMT (Minimum weight 40gms) any colour for fixing with 15mm bore pipe complete all as specified and as directed.

Supply and fix in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

Supply and fix in repairs 15mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butter fly handle complete all as specified and as directed.

Supply and fix in repair stop cock 15mm bore fancy type, chromium plated with long shank and cup, concealed type, cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix UPVC pipes 110 mm bore type 'A' single socketed in any length with rubber ring joint fixed to walls with and including PVC brackets complete all as specified and as directed.

Supply and fix UPVC bend/shoe 110mm bore all as specified and as directed.

Supply and fix steel tubes(concealed), galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc after taking up or down 15mm dia old steel tubing & connection complete as specified and directed.

Supply and fix steel tubes(concealed), galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc after taking up or down 20mm dia old steel tubing & connection complete as specified and directed.

M&L for Brick work with sub class 'B' bricks old size, straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed.

Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection, laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.

Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Material and Labour for preparation of surface and applying one coat of synthetic enamel paint on old steel surface exc 10 cm width or girth complete all as specified and as directed .

Supply and fix factory made PVC Cup board frame of size 75 mmX40 mm with a wall thickness of 5 mm , made out of extruded 5 mm thick plain colour PVC Sheet reinforced with 15mm X15mm MS square tube of 19 gauge thickness throughout the frame and mitred cut at two corners and jointed with 2 Nos of 150 mm long brackets of 10mmX10mm MS square tubes . The door frame shall be fixed to the wall using 65/100 mm long MS screws through the frame by using PVC fastners . A minimum of 4 Nos of screws to be provided for each vertical member and minimum of 2 Nos of screws to be provided to horizontal member, prelam colour complete all as specified and as directed .

Supply and fix factory made PVC Cup board shutter of 25 mm thick consisting of frame made out of MS tubes of 19 gauge thickness of size 15 mmX15 mm covered with 5 mm thick PVC 'C' channel of size 25 mm X 50 mm forming stiles, top and bottom rails, Panelling of 5 mm thick plain colour PVC sheet fitted in the MS frame welded / sealed to the stiles and rails with 25 mm wide X 5 mm thick PVC sheet beading on either side and joined togather with solvent cement adhesive. An additional 5 mm thick PVC Strip of 20 mm width shall be stuck on the interior side of the 'C' channel using PVC solvent cement adhesive etc . prelam colour complete all as specified and as directed.

Supply and fix in repairs factory made PVC centre partition and shelf of 15 mm thick consisting 15 mm (5 mm X 3) 19 mm square tube, plain in colour complete all as manufacturers instructions complete all as specified and directed.

S&F in repairs CI traps 'P' or 'S' of 100 mm dia complete all as specified and directed.

Surface excavation n.exc.30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.

M&L for Hardcore of gauge n exc 63mm broken bricks , deposited, spread and levelled in layers n exc 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in sub base, floor, pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed/broken stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade(with grey cement and pigment) complete as specified and as directed.

Materials and labour for providing sand cushion(25 cm thick) under interlocking tiles including watering and consolidation complete as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in Soft/loose soil complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed.

Removing excavated material n.exc. 50m and depositing where directed to a level n.exc. 1.50m above starting point complete all as specified and as directed.

Materials and labour for lintels in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Structural steel works as in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and directed.

S&F mild steel Plates 5 mm thick and over (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks old size, straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4) complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring any type complete, including fixture and fittings any type removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed.

Taking down ceiling fan/Exhaust fan from existing position and kept in store under safe custody for refixing the same on existing postion complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Fixing only ceiling /Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Material and labour for painting by spraying with synthetic enamel paint, first quality, glossy finish to ceiling Fans, any make, Model and size, including Blades/ Down rods/ Canopy/ Stand, Casing/ Cage and all accessories after preparation of surface including thoroughly rubbing /cleaning old rusted spot complete all as specified and as directed.

Material and labour for point wiring (concealed type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular metallic inner base plate and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for One light point controlled by one switch complete all as specified as directed. Note : (i) Cost of cutting of wall, if any, for housing of GI box, wiring,ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate.

All as per Item No. 99 above but for one ceiling fan/ exhaust fan point controlled by one switch and one regulator complete all as specified as directed.

All as per Item No. 99 above but for one 3/5pin 6 Amp Socket outlet on the independent board complete all as specified as directed.

All as per Item No. 99 above but for one 3/5pin 6 Amp Socket outlet on the same board complete all as specified as directed.

All as per Item No. 99 above but for one call bell point controlled by one switch complete all as specified as directed.

All as per item no 99 above but for FRLSH PVC insulated 1100 volts grade unsheathed single core multistranded copper conductors 2.5 sqmm for fixing of 16 A switches, sockets, etc complete all as specified as directed.

Supply and fix celling rose surface, 3 terminal ISI marked complete all as specified and directed.

Supply & fix Modular switch, one way, 6 Amp, 1 module complete all as specified and directed.

Supply & fix Modular socket, 6A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix Modular switch, one way, 16 Amp, 1 module complete all as specified and directed.

Supply & fix Modular socket, 6A/16A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix Modular electronic fan stepped regulator, 120 watt, 2 module complete all as specified and directed.

Supply & fix Modular Bell push 6A,1 Module complete all as specified and directed.

Supply & fix Modular Blank plate,1 Module complete all as specified and directed.

Supply and fix call bell Ding Dong, AC, 230V single pole complete all as specified as directed.

Supply and fix Modular white cover plate with metal frame- 3 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 12 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 2 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 8 Module complete all as specified and directed. (Make of item no 106 to 117 ;- Myrius model of Legrand or equivalent in Siemens/Gold Medal/Schneider)

S&F lamp holder PVC/Polycarbonate type with backplate suitable for batten fittings complete all as specified as directed.

Supply and fix LED bulb 15 watt ,B 22 base ,complete all as specified and as directed

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make: Century LED Ltd /Surya / Wipro /Philips/Havells/Crompton.

Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. (Make : Century/Surya/Philips/Wipro/Havells/Crompton)

Supply and fix LED bulk head light fitting 10/12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking out old unserviceable fitting any type complete all as specified and directed. (Make : Century/Surya/Philips/Wipro/Havells/Crompton)

Supply and fix LED STREET light/Building security light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size with connection complete including taking down old light fitting any type complete all as specified and directed. Make - Century LED Ltd / Wipro / Philips/Surya/Havells/Crompton

Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 1.5 sqmm and one run of 1.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 1.5 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 4.0 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 12 way, 240 volts including taking down the old unserviceable DB complete all as specified and directed. (Make : C&S/Indoasian/Havells/Bentec/Legrand)

Supply and fix MCB single pole & neutral 40 to 63 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed.(Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 10 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size complete all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified as directed.

S.S. CO (BID ID -3457191)

MASTER BUILDERS (BID ID -3457565)

MOTHER LUMIER INDUSTRIES (BID ID -3456981)

BHARUKA ENTERPRISES (BID ID -3456948)

ELECTRO COMMERCIAL CO (BID ID -3456955)

RUNJEN CONSTRUCTION (BID ID -3457081)