Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Fulfil eligibility Ceriteria |
| 2 | Accepted-Technical | Accepted-Technical Fulfil eligibility Ceriteria |
| 3 | Accepted-Technical | Accepted-Technical Fulfil eligibility Ceriteria |
Tender Value
₹2.2 L
EMD Value
₹4,500
Closing Date
20 Jun 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Baijnath District Kangra HP
Providing installation testing and commissioning of 1.50 HP Submersible pump set with allied accessories and Providing fixing MS Stand post and water tank at Village Kharanal at Pamadu other Location
2026_HPIPH_136533_1
2448-2505 dated 12-06-2026
Open Tender
Pumps/Motors
Item Rate
30 days
Paprola
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
Executive Engineer
₹4,500
22 Jun 2026
12 Jun 2026
20 Jun 2026
12 Jun 2026
20 Jun 2026
12 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, Installation,Testing and Commissioning of 1.50 HP Submersible motor set of KSB/ Kirloskar make conforming to IS:8034-1976 (latest with upto date amendment) Suitable for operation on under mentioned characterstics complete as per manufacture standard including required accessories coupled directly to submersible motor suitable for operation 230 Volts three phase 50 H.Z. A.C supply minimum class 'B' insulation. The power of the motor should be 10% in excess of maximum powers required by the pump in the complete range of (-) 25% and +10% of duty point head. The motor should be conforming to BIS 325-1970 and latest with up to date amendments and also complete earthing with copper strips as per HPSEBL rules and IS code 3043-1966 of latest Complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . | 2 | Set | - | - |
| 2 | Providing & laying PVC insulated jointless, flat water proof 3 core copper cable 2.5 mm2 of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I)-1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . | 150 | Rmt | - | - |
| 3 | Providing and fixing of starter ( direct on line) of standard make such as L&T/ MEI/ Havels/ AVON/ Crompton/Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 300 volts capacity and ampere meter of capacity 0 to 300 ampere of standard make as per the Engineer in Charge. | 2 | Set | - | - |
| 4 | Supply and fixing mild steel angle from steel 16 SWG fabricated floor mounting type switch board comprising and capable of mounting the following accessories and with all internal electrical connection dully painted. The drawing of the pannel board will be subject to approval of Engineer-in-charge. | 2 | Nos. | - | - |
| 5 | Providing and fixing electric material for energisation of hand pump wooden board 3"x3" MCBICTP including switches ,wire 3/29,1/18,7/22 fuse 32 Amp. DP switch with sheet insulation switch board with sheet including sockets and switch angle holder bulb( lamp 100 Watt) nut & bolts and all other petty items required for electrical connection as per requirement complete in all respect as per the satisfaction of Engineer-in-charge. | 2 | Job | - | - |
| 6 | Providing and fixing mild steel plate with nipple 32/40 milmetre dia welded, galvanised iron reducer 32/40 milimetre dia M.seal & PVC tapper etc. complete in all respect as per the satisfaction of Engineer-in-charge. | 2 | Job | - | - |
| 7Providing , fixing and fitting 3 - layer PP-R (Polypropylene random copolymer) pipes UV stabilized and antimicrobial fusion welded, having themal stability for hot and cold water suply including all PP-R plain and brass threaded polyproylene random fittings complete to ISI 15801-2010 and testing of joint including high steel carbon rope size 5 milimetre square for holding of submersible pump set within all leads and lifts as per the direction of Engineer in Charge. | |||||
| 7.01 | a) 40 milimetre dia | 140 | Rmt | - | - |
| 8Providing , fixing and fitting 3 - layer PP-R (Polypropylene random copolymer) gun metal wheel Valve (Peet valve) fitting within all leads and lifts as per the direction of Engineer in Charge. | |||||
| 8.01 | a) 40 milimetre dia | 6 | Nos. | - | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.25 MB
Form_6.pdf
Tender Documents • 0.26 MB
TC.pdf
Tender Documents • 0.05 MB
Form_8.pdf
Tender Documents • 0.80 MB
BOQ_202064.xls
BOQ • 0.33 MB
Corrigendum.pdf
PDF • 0.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .