Annual Plan-2026-27, President room furnishing -Pro. No. 288/27 of Nedumpana Grama Panchayath

9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm

OD192100/2026-2027:Plywood frame work for panelling: Providing and fixing frame work for panelling system as per approved drawing. Frame work finished with16mm thick calibrated BWP grade plywood concorming to IS 710 of approved make, as per the direction of engineers in charge. The frame work shall be made of 80 mm section to fixed at 600 mm c/c spacing as per the site condition including cost and conveyance charges of all materials, labour charges etc. Elevation area will be measured.

OD190771/2026-2027:Laminate panelling: Providing and fixing 1 mm thick laminate for paneling workon to existing plywood / substrate using adhesive complete as per the direction of the engineers-in-charge including all cost of accessories, labour charges etc.

OD192101/2026-2027:Plywood rack and cupboard (16 mm thick) Providing and fixing marine plywood Pannelling, cupboard and partition work using 16 mm thick calibrated BWP grade ply wood conforming to IS 710 of approved make, as per the direction of the engineers in charge. The frame work shall be paid seperatly. Rates are inclussive of cost and conveyance of all materials and labour charges.

OD190772/2026-2027:Providing and fixing 6 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)