WB/58/APAS-34/BDOKNT/25-26/09

Cement concrete with 30mm graded shingles excluding shuttering in ground floor (a) 1:3:6 proportion (B) with NB varity (P-34,SL-22(II),PWD)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface], 1:4, 10mm (PWD-Page-189,SL-01)

Supplying, fitting & fixing circular corrugated Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 55 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (i) In Roof:- a) With 0.65 mm thick sheet (Page-83, SL-15)

Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping).( PWD:-Item no-15, Page-84)(0.71mm)

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction ofEngineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brandconforming to IS:814- 2004, haulage, hoisting and erection all complete. (PWD BUILDING, PAGE-100, SL-02) Thumb Rule=1.20 MT/100 m2= 12 Kg/m2 PWD(WB) 2017, 3rd CORRIGENDA of BUILDING WORKS, Page-92, Sl-13

Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings inground floor.(PWDBuilding--Page-123, SL-10)(Other Local Wood)

Brick work with 1st class bricks in cement mortar (1:4)(b) In superstructure, ground floorPWD Building, Page-15, Item No-07

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.(PWD, P-16, SL-16)

Fitting Fixing Gate (MS Flat Bars)(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. (P-105, Item No-16)

White washing including cleaning and somoothening the surface throughly (a) Two coat, (PWD, SL_01, Page-194)

Color washing with any shade with stainer including cleaning and somoothening the surface throughly (a) One coat (a) other than yellow pink.(pwd building, SL-4, P-194)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -ii) Two coats ( in any shade except white)(PWD Building Schedule Page No- 200 Item No..2,(iv)

P-265, I-8.07:-Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)

Add:- GST @ 18%

Add:- Labour Welfare Cess @ 1%