Construction of ladder and shed etc

Amount

Supplying, fabricating and fixing of permanent ladders at various locations at IPR Campus

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40/20 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)including matching with existing road.

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns

Providing, fabricating, assembling, hosting / erecting and fixing in position at all heights / all levels / all floors / all shapes and sizes with all leads and lifts structural steel works made from tubular sections as per IS 1161(round hollow sections) or box sections (square, rectangular hollow sections as per IS 4923), plates as per detailed drawing and design including cutting, wastage, welding, bending (shop at site), hoisting, drilling, fixing in position, bolting wherever necessary, in position welding of required lengths, griding, finishing edges, filling the welded spots with paint, grouting in the RCC members including priming all the sections with one coat of zinc based yellow primer including preparing the surface, Scaffolding, Required size of anchor etc., complete at any heights/levels all as per instructions, specifications and as directed by Engineer – in – Charge (only standard measurements will be paid) Note:  The fabrication work shall be confirm IS standard  The quoted rates should be inclusive of the all materials, labours, one coat of primer, welding rods for all structural sections, bolts, washers, Scaffolding (Wherever necessary) as per suit and site conditions with taken care of safety measures, Payment shall be made only for actual material fixed at site as per standard measurement (weights) only. Rolling margin and wastage shall not be paid.

Providing and fixing of full threaded Anchor fastner - M10 x 90/21 with Epoxy resin anchor grout (chemical) including drilling in R.C.C. etc., for all height and levels etc., complete as instructed and directed by Engineer-in-charge. The Payment shall be made on the actual quantity of bolts fixed at the site.

Providing and Applying two coats of Synthetic enamel paint on MS member using 1st quality paint from approved manufacturer of approved colour and shade to give an even shade including scaffolding, removing of rust, cleaning the surface, preparing the surface to receive paint including filling cracks and creaves with Putty or other approved filler materials, applying two coats of paint to steel work. cost also includes thinner, filler, putty and other materials, necessary labours etc. complete as directed by Engineer in charge at all heights, in all floors. Note:- Actual painted area will be measured and paid. (1) Synthitic enamel Paint of approved brand (2) Putty suitable to Mild steel members of approved brand

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Construction of shed above water coolers at IPR Campus

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, patchways including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work Note : Measurement will be taken in Sqm of the treated/painted surface area of individual members

Providing and fixing silicon sealant at the joint of FRP sheet and plaster of size 5 mm x 5 mm in triangle shape or straight at joint as per required to make the surface water leakage proof at periphery of window from inside and outside both etc., as directed by EIC.

Demolishing R.C.C. work manually/ by mechanical means including disposing of the debris outside campus, stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Note- Hot finished welded type tubes

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS with 2mm thick flat

Demolishing dry brick /Paver block pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead :

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

PRAHAR INFRACON

N J Corporation