Repair renovation of staff quarter Block D at PDC colony Draba Surankote

Amount

Demolishing Stone Rubble Masonary manually/ by mechanical means including stacking of seviceable material and disposal of unserviceable material within 50 mtrs. Lead: in cement Mortar

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of walls complete including disposal of rubbish to the dumping ground within 50mts lead. with cement mortar 1:4 (1cement : 4course sand)

Dismentalling cement concrete manually or by mechanical means including disposal of rubbish to dumping ground lead upto 50 mts 1:3:6 or richer mix

Providing and laying of vitrified floor tiles in different sizes (thickness to be specified by the manufactures) with water absorbtion less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick bed of cement mortar 1:4 (1cement:4course sand) including pointing the joints with white cement and matching pigment etc complete 11.34.2 size of tile 60x60cm

Providing and fixing of 1st quality creamic glazed tiles conforming to IS:15622 of minimum thickness 5mm of approved mark like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours,shades except begundy, bottle green, black of sizes as approved by Engineer In-charge in skirting, rises of steps and dados over 12mm thick bed of cement mortar 1:3(1cement:3course Sand) and joining with Grey cement slurry @3.3kgs/sqm including pointing the joints with white cement and matching pigment etc complete

Providing and Fixing ceramic glazed floor tiles 300x300 mm(thickness to be specified by the manufaturers) of Ist quality conforming to IS:15622 of NITCO, ORIENT,SOMANY,KAJARIA or equiavalent matre in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

Providing and fixing plain multipurpose cement board (high pressure steam cured ) as IS: 14862 with suitable screws for fibre cement board in ceiling etc.. complete (frame work to be paid separately) 1mm 12.37.1 6 mm thick

Providing and fixing of panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enemalled M.S butt hinges with necessary screws excluding panelling which will be paid separately (35 mm thick shutter) First class kail wood

Providing and fixing of panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserted excluding portion inside groves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 9.8.10 Particle board 12mm thick 9.8.10.2

Veneered particle board with commercial veneering on both sides conferming to IS:3097

Float Glass Panes 4mm thick glass panes. Vent Clerestory window

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/ and black enamelled M.S. butt hinges with necessary screws. First class kail wood

Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate ,with two chromium plated brass brackets fixed with C.P. Brass screws and wooden plugs etc where ever necessary complete. 20mm dia .

Providing and fixing M.S. grill of required pattern in frames of windows etc with M.S. flats square or round bars etc including priming coat with approved steel Fixed to steal windows by welding.primer all complete.

Dismantling roofing including ridges, hips, valleys and gutters etc and staking the material within 50 metres lead of: 15.28.1 G.S. sheet /G.I sheets

Providing corrugated G.S sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8mmm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white led and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Providing and fixing ISI marked oxidised M.S sliding door bolts with nuts and screws etc complete. Size 250 x16 mm

Providing and fixing M.S tower bolts ISI marked (anodised, anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc complete

For Doors 200 x 10 mm

For Windows & Vents 100 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc complete.

For Doors 125mm

For Windows & Vent 100 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc complete. Twin rubber stopper

Providing and fixing IS. 3564 marked aluminium die cost body tubular type universal hydraulic door closer, hardwyn make (class queen) or equivalent with necessary accessories and screws etc complete. For doors

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Applying priming coat: with ready mixed pink or a grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer over the plastered wall surface to prepare the surafce even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Providng 20 mm cement plaster of mix 1:4 ( 1 cement: 4 coarse sand) to Masonary wall

Finishing walls with water proofng cement paint of Approved brand and manufacture and of required colour to give an even shade (new work 2 or more coats ) aa\pplied @3.84/10sqm

Providing wood work in frames of doors, windows, clerestory windows, and other frames, wrought frames and fixed in position: 2nd class kail wood

Providing and fixing M.S hook and eye ISI mark medium welded at L.M.R 150 mm long

Painting on G.S sheets with sythetic enamal paint of approved brand and manufacture of required colour to give an even shade . New work (two or more coats) including a coat of approved steel primer byt excluding a coat of mordant solution.

Engagement of of labour for clearence of rubbish and earth from Drains etc. and the site ( to be paid actual)

Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5 m in width) and for shafts, valves, cess pits and the area not exceeding 10 sq m in plan, depth up to 1.5 m including disposal of the excavated earth up to 1 m from cutting edge, disposed earth to be levelled and nearly dressed in; All kinds of soil (Add Rs 91.8 for additional 50m lead)

Providing and laying in position cement concrete of specified grade excluding cost of centring and shuttering. All works upto plinth level 1:3:6 ( 1cement :3 Coarse sand :6 garded stone Agg.) 40 mm nominal size (Nallah)

Centering and shuttering including strutting propping etc. and removal of same. Foundations , Footings and bases of columns

Reinforcement cement concrete work in beams, suspended floors, roofs, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Mild steel and medium tensile steel bars

Providing and fixing gang saw cut mirror polished ( pre moulded and pre polished), machine cut for kitchen platform, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 course sand) with joints treated with white cement, mixed with matching pigment. Epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape (area of slab Over 0.5 sq.) 18 mm thick

providing and fixing 18 mm thick block board with commercial ply veneering on both sides in shelves with screws and fittings where ever required,

Providing and fixing 4mm thick coir veneered board to frame, backing with screws etc complete

Provding and fixing ply wood 4 mm thick one side decorative veneer conforming to IS 1328 for plain lining ( clading ) with necerssary screws including priming coat on unexposed surface . With Decorative veneer facing of approved make

Providing and fixing magnetic catcher in cupboard/ ward robe shutters including fixing with necessary screws etc complete ( best make of approved quality). Double strip (Horizontal type)

Providig and fixing Plain Eaves Borading. 2nd class Kail wood 1. 32mm thick 250mm wide

Providing and fixing pressed steel door frames manufactured from commercial mild steel of 1.6 mm thickness including hinges jamb , bead and if required angle threshold of mild steel angle of section 50x 25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, welded adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a priming coat of approved steel primer after pre-treatment of the surface as directed by the Engineer-in-charge: Profile C

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

Brick work with common burnt clay FPS (non modular ) bricks of class designaion 7.5 in foundation and plith in cement Mortar 1:6 ( 1 cement:6 coarse sand)

(Add Extra for brick works in super structure above plinth level up to floor V level)

Half Brick massonary with bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement:4 coarse sand)

Carriage of different materials from source to site by MT

Sand with average distance of 7 kms

Bajri with average distance of 7 kms

Cement with average distance of 7 kms

Bricks with average distance 180 km

Providing and fixing white Vitreous china pedestal type water closet (European type W.C. pan) with seat and lid C.P brass wings and rubber buffers, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to I.S 7231 with all fittings, C.I/M.S brackets 40mm dia flush bend, with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors where ever required: W.C pan with ISI marked white solid plastic seat and lid.

(a)Providing and fixing wash basin with C.I/M.S brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls where ever required: Flat back Wash basin size 550 x 400mm with a pair of 15mm C.P brass pillar tapes

(b)Providing and Fixing white vitreous China Pedestal for Wash basin completely reccessed at the back for the reception of pipes and fittings.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 453 x 357mm

Providing and fixing 600x 120 x 5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets guard rail complete fixed with 40mm long screws , rawl plugs etc complete

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls where required : with out Drain board 610 x 510 mm bowl depth 200 mm

Providing and fixing of G .I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.

15mm dia nominal bore (medium)

20mm dia nominal bore (medium)

Providing and fixing ball valve (brass) of approved quality complete.

15mm nominal bore

20mm nominal bore

Cutting holes up to 30 x 30 cm in walls including making good the same With F.P.S bricks

Provide and fixing long nose C.P. brass bib cock of approved quality conforming to IS : 8931 15mm nominal bore

Providing and fixing CP brass bib cock of approved quality 15mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931 15 mm nominal bore

Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete (new work)

15mm nominal bore

20mm nominal bore

Providing and fixing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank( sintex, Eletroplast, Star, Lotus or equivalent having valid ISI License

Providing and fixing P.V.C pipe 110mm dia 4 mm wall thickness ,pressure@4 Kg/cm2 (supreme quality) including all fittings complete as directed by Engineer incharge

Providing and fixing P.V.C pipe 75mm dia 4 mm wall thickness , ,pressure@4 Kg/cm2 (supreme) including all fittings complete as directed by Engineer incharge

Providing and fixing P.V.C pipe 50mm dia 4 mm wall thickness , ,pressure@4 Kg/cm2 (supreme) including all fittings complete as directed by Engineer incharge

Providing and fixing of waste coupling of 1.25” x 6” with 32mm dia.

Providing and fixing P.V.C waste pipe 1.25” with 32 mm dia.

Providing and fixing of jet connections

Providing and fixing C.P.Brass towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangements of approved quality and colour: 19.73.1 450mm long towel rail with total length of 495 mm , 78mm wide and effective height of 88mm, weighing not less than 170 gms

Providing and fixing C.P. Brass soap dish holder having length of 138 mm , breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing C.P.Brass grating of approved quality and colour 125 nominal dia with 35 mm waste hole

Providing and fixing unplastised P.V.C connection pipe with C.P.Brass Nuts of approved quality , colour 15mm nominal bore with 45 cm length

Providing and fixing C.P. Brass extension nipple for water tank pipe, fittings of approved quality , colour

20.63.1 15 mm nominal size , with dimensions 67 x 40 x 40 mm weighing not less than 38 gm

20.63.2 20 mm nominal size , with dimensions 69 x 43 x 43 mm weighing not less than 45 gms

Providing and fixing PVC pipe 110mm dia 4mm thick wall thickness (supreme quality ) for carrying waste water including earthwork for trenching and backfilling ,including encasing with cement concrete 1:5:10 all complete as directed by in engineer in-charge

Providing and fixing of P.V.C Tee 110 mm dia

Providing and fixing P.V.C floor trap 110 x 75 mm dia

Providing and fixing PVC bend 110 mm dia

Providing and Installation of Electric water heating geyser preferably Havels/ Bajaj/Venus make with following technical specifications 1. Wattage - 2000w 2. Voltage - 230v 3. Capacity - 25 litres Along with allied fittings as per requirement complete all as specified and directed by Engineer- incharge.

Providing and Installation of self priming mono-set pumps preferably Crompton Greaves/ kirloskar make with following technical specifications 1. Power - 0.75kw/ 1 HP 2. Voltage - single phase 220v 3. Size - 25mm/25mm 4. Head - 39m-40m 5. Discharge – 3000 LPH/75 GPH Along with class allied fittings as per requirement complete all as specified and directed by Engineer- incharge .

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group A

Group B

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 x 10 sq.mm + 1x 6 sq.mm earth wire

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Switch socket outlet 2 pin and 3 pin 5amp. Flush type Anchor/ISI mark.(1.5 sq.mm)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

Supplying and fixing following way, single pole and neutral , sheet steel , MCB Distribution board , 240 volts , on surface /recess ,complete with tinned copper bus bar , neutral bus bar, earth bar , din bar , interconnections , powder painted including etc. as required (But without MCB/RCCB/Isolator) 8 way , Double door .

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

(b) Single pole and Neutral 32 Amp

(c) Single pole and Neutral 63 Amp

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply and fixing of following electrical items suitable for operating on 240/230V AC, 50HZ supply. (Havels, Bajaj, Philips Anchor, or equivalent) complete as directed.

Holders

Compact Fluorescent lamp 15 w

Electronic Light above wash basin

Fan regulator electronic dimmer type A.C 240v, 5 steps including connection. (Havel’s/Anchor/ISI mark).

Supply and fixing of following electrical items suitable for operating on 240/230V AC, 50HZ supply. (Havels, Bajaj, Philips Anchor, or equivalent) (a) Ceiling fan 1200 mm sweep

1100 volt grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC take and overall PVC sheathed 25 sqmm fixed to wall or as directed.

Providing and fixing following protection Equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

MCCB-63 Amp 4 pole with enclosure

Changeover 63 Amp(ICSPN) 2 Pole

MS ABDULLAH CONSTT.

ARFAN KHAN