Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | ₹3.2 L | L1 | Accepted-AOC agt executed |
| 2 | Rejected-Technical PULLION PRUSAYIL NEESAL PERINAD P O KOLLAM | - | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | K VENUGOPAL L1 | ABHAYADEV. R L2 |
|---|---|---|---|---|---|
| 1.00ANganawadi 86,110,107 | |||||
| 1.00 | OD274378/2025-2026:Supplying and fixing good quality CP handle for cup board door | 50 | each | 168.91 ₹8,445.5 Lowest | 170.77 ₹8,538.5 |
| 1.00 | OD274377/2025-2026:Staining the counter applying tinker paste and sand papering, then applying wood filler and then sand papering, spraying NC putty and then sand papering, spraying two coat lacquare paint and also spraying PU sealer and spraying two coat french polish etc | 94 | sqm | 1,093.18 ₹1,02,758.92 Lowest | 1,104.47 ₹1,03,820.18 |
| 1.00 | OD274376/2025-2026:Providing and fixing High density board ( with out lamination) of thickness 18 mm in office counter and cabin work including cost of screw etc complete | 47 | sqm | 2,776.26 ₹1,30,484.22 Lowest | 2,804.8 ₹1,31,825.6 |
| 1.00 | 16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge. | 22.5 | sqm | 1,107.72 ₹24,923.7 Lowest | 1,119.16 ₹25,181.1 |
| 1.00 | 9.79.1:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.40 mm | 5 | no | 301.94 ₹1,509.7 Lowest | 304.81 ₹1,524.05 |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 7.5 | sqm | 765.42 ₹5,740.65 Lowest | 773.04 ₹5,797.8 |
| 1.01 | 9.88:Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 12 | no | 931.74 ₹11,180.88 Lowest | 941.05 ₹11,292.6 |
| 1.01 | 9.65.1:Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930
with screws etc. complete : (Copper oxidized as per IS : 1378).300x20x6 mm | 5 | no | 93.92 ₹469.6 Lowest | 94.56 ₹472.8 |
| 1.01 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 226 | sqm | 157.13 ₹35,511.38 Lowest | 158.83 ₹35,895.58 |
Tender Value
₹3.6 L
EMD Value
₹8,892
Closing Date
29 Sept 2025, 6:00 pmClosed
SE, Kollam municipal corporation
SE, Kollam municipal corporation
Project No.1323/25-Division9 Anchalummoodu Renovation of Murunthaveli LPS
2025_LSGD_800077_5
PC4/16546/25
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kollam Municipla Corporation
Please refer Tender documents.
7 documents required · 7 mandatory
₹785
Yes
₹8,892
Yes
13 Jul 2026
20 Sept 2025
30 Sept 2025
20 Sept 2025
29 Sept 2025
20 Sept 2025
20 Sept 2025 - 29 Sept 2025
Amount
ANganawadi 86,110,107
OD274378/2025-2026:Supplying and fixing good quality CP handle for cup board door
OD274377/2025-2026:Staining the counter applying tinker paste and sand papering, then applying wood filler and then sand papering, spraying NC putty and then sand papering, spraying two coat lacquare paint and also spraying PU sealer and spraying two coat french polish etc
OD274376/2025-2026:Providing and fixing High density board ( with out lamination) of thickness 18 mm in office counter and cabin work including cost of screw etc complete
16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge.
9.79.1:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.40 mm
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
9.88:Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
9.65.1:Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : (Copper oxidized as per IS : 1378).300x20x6 mm
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
ABHAYADEV. R (BID ID -2365330)
Bidder Name
ABHAYADEV. R
K VENUGOPAL
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1327241.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .