Repairing and Renovation work at ITI Valod Ta. Valod Dist.Tapi

NAME OF WORK :- Repairing and Renovation work at ITI Valod Ta.Valod Dist.Tapi

BILL OF QUANTITY.

Percentage Rate Tender

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 34.00 Nos 257.63

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(ii) exceeding

2 Dismantling sanitary fittings like wash basin . W.C. pan Indian and 33.00 Nos 415.79

European type, flushing tank etc. including stacking the materials with

all lead and lift.

3 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 202.00 rmtr 76.97

fittings and clamps including stacking the materials with all lead and

lift ( for any dia, of pipe)

4 Dismentaling tiled of stone floors laid in mortar including stacking of 576.06 Sqmtr 49.41

serviceable materilas and disposal of unserviceable materials with all

5 Demolition and disposal of unserviceable materials with all lead and 8.00 Cum. 624.50

lift.(i) Cement concrete.

6 Removing and scraping of old deteriorated plaster of any thickness 1153.00 Sqmtr 20.03

from wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

7 Providing 15mm thick cement plaster in single coat on Rough 1210.70 Sqmtr 247.45

(Similar)side of single or Full/half brick walls for interior plastering upto

floor all level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) mixing of water proofing plaster SBR. All Floor

8 Providing And filling with good quality cinder (steam coal) as directed 4.00 Cum. 561.87

by engineer in charge in sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed, for all floor.

9 Providing Water proofing Treatment on Sunk Slab including cement 151.07 Sqmtr 376.63

concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer and finished with a

floating coat of neat cement average 50mm thick to Prepare slope

including water proofing chemical etc. Complete for Sunk Slab All

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

10 Providing and laying Machine cut, Free edges, Machine polished 133.11 Sqmtr 2506.93

Granite stone slab 18 mm thick Single Piece For doors and Windows

Cill and Jambs Cladding as per design including Full moulded Round

front edge and 1 cm nosing and laid on 20 mm thick cement mortar

1:6 (1 cement : 6 coarse sand) and jointed with gray cement slurry

including rubbing and polishing etc. complete

11 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 216.00 Sqmtr 1432.78

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

12 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm 627.00 Sqmtr 1477.25

x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

13 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP 41.83 Sqmtr 2615.05

shutter having extra reinforcement on sides & edges in polish finish. The

core of the shutter & frame is to be filed up with injected polyurethene

foam done in situ alongwith embedded wooden pieces for stiffening

& also taking hinges & fintures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary

screws & alluminium S.S fixtures & fastenings & fastener sleeve.

14 Providing and fixing standared extruded of alluminium section of size 12.20 Sqmtr 1175.56

63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

15 Providing and fixing wash down water closet (European type, W.C. 9.00 Nos 3998.03

Pan) with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) inculding Providing and

fixing plastic seat and cover for wash down water closer with C.P.

brass hinges and rubber buffers. (B) Black plastic seal and cover

inculding of Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings such as lead

valve less syphon, 15mm nom.nal size brass ball valve with polythene

float, C.P brass handle unions and couplings for connections, with

inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush

bend including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I) In white colour

. (A) vitreous China Pattern :(i) in white colour

16 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) 6.00 Nos 1426.86

size 580mm Including Providing and fixing 100mm size P or S trap for

water closet squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous

China. Including of Providing and fixing in Cement Mortar 1:3 (1-

Cement : 3-coarse sand)a, pair of white vitreous China 250mm x

130mm x 30mm footrest to long pattern squatting pan water closet.

(A) Vitreous China.(I) Long pattern = White colour

17 Providing and fixing washbasin with single hole for pillar tap with C.I. or 9.00 Nos 1999.97

M.S. brackets painted white including sutting holes and making good

the Providing and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts. (i) 15mm

dia.,Providing and fixing brass screw down stop tap.(A) 15mm dia..(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

18 Providing and fixing Urinal or approved quality including conecting the 9.00 Nos 1062.18

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat

back or corner type size 430mm x 260mm x 350mm

19 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 36.00 Nos 585.37

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

20 Providing and fixing screw down bib taps of following size.(A) Brass 24.00 Nos 186.83

screw down bib tap polished bright. (i) 15mm dia.

21 Providing and fixing Gun metal check or non-return fullway wheel 12.00 Nos 420.64

valve. 25mm. dia.

22 Providing and fixing Gun metal check or non-return fullway wheel 8.00 Nos 663.43

valve. 40mm. dia.

23 Providing and fixing ball cock of approved. quality as directed.(A) 5.00 Nos 132.89

Copper Metal (A) 25mm. dia.

24 Providing and fixing chromium plated brass half trun flush cock of 24.00 Nos 263.72

approved quality including fixing in pipe line etc. complete.(ii) 25mm

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

25 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 85.00 rmtr 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

26 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 75.00 rmtr 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

27 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 70.00 rmtr 148.12

Pipe ( SCH- 40) for cold water Including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

28 Providing and fixing S.W. gully trap with C.I. grating brick masonry 16.00 Nos 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps.(B) 150mm x

100mm size P or R type

29 Constructing Brick masonry road gully chamber 500mm x 450mm x 4.00 Nos 2017.20

600mm including 500mm x 450mm C.I. horizontal grating wih frame

30 Constructing brick masonry chamber for underground C.I. Inspection 5.00 Nos 2932.93

chamber and bends with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

31 Providing, laying and jointing in true line and level 110mm diametre 120.00 rmtr 857.66

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

32 Providing and fixing cast iron spigot and socket soil, waste and 85.00 rmtr 741.01

ventilating pipes of the following nominal size.(B) 75mm dia.

33 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length 12.00 Nos 101.91

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

34 Providing and fixing in position cowel went to pipes.(C) 100mm dia 10.00 Nos 505.18

35 Providing erecting and fixing double coated PVC. (ISI) water tank of 5000.00 Litr 3.95

required capacity each with all necessary fittings and connection etc.

complete on terrace.

36 20mm thick sand faced cement plaster on walls upto height 10 metres 765.00 Sqmtr 412.08

above ground level consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete. with mixing of water proofing plaster

37 Crack Repairs:-Crack filling using fiber reinforced polymer modified 100.00 rmtr 202.00

mortar after openning crack in "V" grove, Making Surface dust free,

with a bond coat of polymer as per the data sheet for crack repairing

cracks less than 10mm

38 Removing old colour by a washing and scraping and sand papering 4614.40 Sqmtr 133.56

the wall surface smooth including necessary repairs to scratches

complete and Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth.

39 Finishing wall with weather proof exterior emulsion paint on wall 5544.50 Sqmtr 117.41

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials complete as directed by Engineer Incharge

40 Providing and laying broken chine mosaic flooring for terrace using 12 666.40 Sqmtr 765.98

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

41 Scraping oil paint from steel and other metal surface and making the 275.30 Sqmtr 176.28

surface even (with Hand Scraping and Applying primer coat of

approved quality and Two coats of Oil painting etc.complete as

42 Brick work using common burnt clay building brick having crushing 30.80 Cum. 4403.40

strength not less than 35 kg/sq. cm. in super structure above plinth

level up to floor two level in cement mortar 1:6 ( 1 Cement: 6 fine

sand) (B) Convention for G.F

43 Providing and fixing, repairing of door & window 35 mm thick shutters 160.70 Sqmtr 2474.50

for Doors, windows any track of aluminium window and clear story

windows and 4mm frosted glass including Two coats of oil paint to

wooden surfaces and Stainless steel decorative type designs all

necessary fixtures / fastening with ancore fastening of old granite or

teak wood frame all labour etc.as directed by engineer in charg

44 Painting two coats (including priming coat) on new wood and wood 187.70 Sqmtr 171.56

based surface with enamel paint, interior to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter

sand papering and stopping

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

45 Repairing and Provide Main Enterance gate of Building including 1.00 Job 50500.00

Colour, latters and other materials as required to make as per

guidence of engineer incharge

46 Road marking with hot applied thermoplastic paints withreflectorising 63.80 Sqmtr 367.73

glass beads on bitumin surface providing andlaying a hot applied

thermoplastic compound 2.5 mm thickincluding reflectorising glass

beads @ 250gms per sqm area,thickness of 2.5mm is excluding of

surface applied glass bedsas per IRC:35-2015. The finished surface to

be level, uniformand free from streaks and holes. zebra patta /bump

pattalane/center line/ edge line/cut patta. The white color

markingshould provide liminance coefficinet on cemend road shalll

bemin 130 mcd/m2/lux and Asphalt road shall be min 100mcd/m2/lux

during the service life during the day time. Themarking should meet

the performance criteria for night timereflectivity, wet reflectivity and

skid resistance as mentioned inthe section-15 of IRC 35-2015. Warranty

for the Retroreflectivity should be two years.

47 Excavation for foundation upto 1.5 m depth including sorting out and 6.00 Cum. 120.01

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

48 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse 79.50 Cum. 3080.90

sand : 6- machine cut stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

49 Providing and laying controlled cement concrete M.250 and curing 6.00 Cum. 8560.54

complete including the cost of formwork and reinforcement of TMT FE

415 for for R.C.C. work including bending, binding and placing in

position complete reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete, road .

50 Steel work, welded in built up sections framed work including cutting, 2160.00 Kg. 91.08

hoisting, fixing in position and applying a priming coat of read lead

paint & two coat oil paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and

51 Providing and fixing of Ridge flashing for roof panel shall be made out 179.00 Sqmtr 867.39

of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete .

52 Providing and fixing pre-cast Rubber Dye / steel Dye interlocking 269.00 Sqmtr 704.07

concrete block 60mm thick with grade of concreteM300 pnumatic

compressed / vibrated mechanically and asper approved design

Confirming to IS 15658 : 2006including 35 mm Sand layer for levelling

and filling thejoint with sand in proper line and level as per guidlines

ofIRC : SP 63-2018 etc. Complete.

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

53 Replacing old & u/s by Point wiring for Light / Bell with 2-1.5 sq.mm & 155.00 Pt. 488.84

earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling complete Cat. III

54 Replacing old & u/s by Point wiring for FAN with 2-1.5 sq.mm & earth 84.00 Pt. 715.08

wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed. (c) with oval

conduit /PVC casing capping double lock type erected flushed on

wall/ceiling complete Cat. III

55 Replacing old & u/s by Point wiring for Individual Plug with & earth 19.00 Pt. 517.12

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (c) with

oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete Cat. III

56 Replacing old & u/s by Point wiring for on board Looped Plug with 6A 30.00 Pt. 309.06

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall /

ceiling with following type accessories Cat. III

57 Replacing old & u/s by Providing following type of Modular Type 60.00 Nos 180.79

Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per site

situation directed by Engineer In charge (9) 16 Amp. SP one way

58 Replacing old & u/s by Providing following type of Modular Type 60.00 Nos 199.98

Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per site

situation directed by Engineer In charge (10) 6/16Amp. Universal

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

59 Replacing old & u/s by Providing following type of Modular Type 5.00 Nos 398.95

Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per site

situation directed by Engineer In charge (5) Electronic hum Free steps

EME Fan regulator Cat.III

60 Replacing old & u/s by Providing and erecting Mains with 1.1 kV grade 600.00 rmtr 104.03

FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (C)

With oval conduit /PVC casing capping double lock type (b) 2 wire

61 Replacing old & u/s by providing and erecting Mains with 1.1 kV grade 1150.00 rmtr 120.19

FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (C) with oval conduit /PVC

casing capping double lock type (a) 2 wire 4 sq. mm

62 Replacing old & u/s by providing and erecting Mains with 1.1 kV grade 105.00 rmtr 170.69

FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (C) with oval conduit /PVC

casing capping double lock type (b) 2 wire 6 sq. mm

63 Replacing old & u/s by providing and erecting Mains with 1.1 kV grade 144.00 rmtr 214.12

FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (C) with oval conduit /PVC

casing capping double lock type (g) 4 wire 4 sq. mm

64 Providing and erecting Mains with ISI marked, 1.5kV grade electrolyte 288.00 rmtr 70.70

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. (e) One wire 6.00 sq. mm

65 Providing and erecting Mains with ISI marked, 1.5kV grade electrolyte 144.00 rmtr 115.14

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. (f) One wire 10.00 sq. mm

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

66 Replacing old & u/s by Providing & erecting Switch board for 25.00 Nos 1133.22

Computer or electric apparatus consisting of following modular type

accessories mounted with PVC/ Metallic concealed/ open box with

single mounting base frame covered with textured/ metallic/ white

front plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

67 Replacing old & u/s by Supplying and erecting LED indoor fittings with 25.00 Nos 373.70

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver (iv) 22-

24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat.III

68 Supplying and erecting LED Solar street lights with High power White 2.00 Nos 21364.53

LEDs wattage of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed with 36 hours

battery backup & MPPT 24V,7.5 A charge controller with 12 hours

automatic switch on/off with wind speed resistance 44 m/s as per IEC

61215 (C) 21W, IP-65, PV Module – 100W and 5 mtr poles complete

69 Replacing old & u/s by Providing and erecting Approved make Four 4.00 Nos 6790.23

pole moulded case circuit breaker having breaking capacity ICU of

25 KA. at 415 V,having normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to work on A.C. supply

Hz. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

70 Supplying and erecting triple pole & neutral 440V / 500V panel 3.00 rmtr 1961.42

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated current

/ cross section area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections. (A)

Suitable for 100 Amp. Capacity

71 Replacing old & u/s by Providing and erecting Miniature circuit 56.00 Nos 123.22

breaker single pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat-III

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

72 Replacing old & u/s by Providing & erecting 240 V MCB double pole 40.00 Nos 329.26

switch for motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat-III

73 Replacing old & u/s by Providing & erecting 240 V MCB double pole 55.00 Nos 362.59

switch for motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat-III

74 Replacing old & u/s by Providing & erecting 415 V MCB Four Pole for 12.00 Nos 736.29

Motor & Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity (b)40

75 Replacing old & u/s by Providing & erecting 415 V MCB Four Pole for 20.00 Nos 811.03

Motor & Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity (c)63

76 Sheets steel powder coated enclosure suitable for incorporating 40.00 Nos 176.75

One/Two nos. MCB.

77 Replacing old & u/s by Providing and erecting Sheet Steel powder 12.00 Nos 355.52

coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (a)

single door (IP-30) (i)4 way

78 Replacing old & u/s by Providing and erecting Sheet Steel powder 7.00 Nos 1492.78

coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43 (iv)12 way

79 Replacing old & u/s by providing and erecting Approved make RCCBs 7.00 Nos 2458.34

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (ii) 40Amps.

80 Providing and erecting Annealed bare Copper wire 4.064mm to 20.00 Kg. 794.87

81 Providing and erecting Pipe type earthing having 150 cms.long and 2.00 Nos 368.65

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

82 For using salt and charcoal / coke as required for pipe type earthing. 2.00 Nos 171.70

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

83 Supplying & erecting earth pit of minimum bore dia.150mm size 4.00 Nos 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

84 Replacing old & u/s by Providing & erecting weather proof, dust & 4.00 Nos 10468.65

vermin proof, floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge

with erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient

nos. of hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating. (The rates excludes the cost

of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with following approved

manufacturers with following size. (A) locally fabricated panel board

(i) with 350 mm depth

85 Providing , erecting , fabricating the M.S. structure as per requirement 40.00 Kg. 77.77

on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with erection on site

as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

86 Replacing old & u/s by Providing and erecting FRLS-XLPE(IS:7098)(I)-88 140.00 rmtr 264.62

ISI armoured cable multistrand Aluminium conductor for 1.1 kV. to be

laid on wall with necessary clamps or in existing trench / pipe of

following size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

87 Providing and, fixing heavy duty flange type brass double compression 8.00 Nos 75.75

type cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of

cables. (B) 3 & 1/2 core 35/50 Sq. mm

88 Solder less crimping type Aluminium lugs conforming to IS suitable for 32.00 Nos 20.20

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (D) 35/50 Sq.mm.

89 Replacing old & u/s by Providing and erecting Approved make Ceiling 5.00 Nos 1596.81

fan with double ball bearing ISI mark with condenser A.C. 230V.50

Hz.1200 mm. sweep complete, canopy erected on existing hook or

clamp with earthing. [Make shall be approved by Engineer in charge]

90 Replacing old & u/s by Supplying & erecting approved make low noise 2.00 Nos 1703.87

decorative exhaust fan having square frame ABS body with inbuilt

lowers & square frame. 250mm with 1350 RPM Cat.II

91 Supplying and erecting approved make Octagonal pole made from 2.00 Nos 7561.87

HR sheet steel. The pole should be made as per IS. and shall be coated

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination

to be erected With Suitable foundation (Included) as per details given

by manufacturer considering site requirement. (C) 5 Mtr. Long 70 mm

Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

92 Supplying and erecting approved make panel mounting type Digital 4.00 Nos 1275.63

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected

on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

93 Supplying and erecting approved make panel mounting type Digital 4.00 Nos 1558.43

Ammeter having 3 digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC,

erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

94 Supplying and erecting Ammeter / Voltmeter selector switch for 3 8.00 Nos 317.14

phase AC Supply 500 V on existing panel board with necessary

95 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 12.00 Nos 274.72

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured

with insulating materials connected to the meter

It. Quantity Unit Amount

No. Description of Item (with brief Specification and reference to book of Rate In

specifications) Figures

96 Supplying and erecting approved make suitable panel indicator LED 12.00 Nos 43.43

type lamp, lens cover, complete erected with necessary connections.

Rs.Seventy Lack Five Thousand Five Hundred Eleven and Paise Thirty Eight Only.

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in figures and

words) of the estimated rate mentioned above Amount of my / our tender works out as under.

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ……. % Above

In words ………………….……………………………. In words ……………

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by the Engineer – In –

Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017

Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

Signature of the contractor Executive Engineer

Tapi (R & B) Division