HOA 2215011960005270272VN

Design, Manufacture Supply errection and maintenance of micro filtration unit capable of discharging 2 MLD Clear (filtered) water in 16 hours duration In a day with the following specifications. Pressure filter assembly made of 5 mm thick MS Plate with FRP Lining of 1.00 mm thickness inside and rust proof enamel paint of 2 coats outside with MS/GI manifold assembly. Flange sets as per drawings, Monitoring Equipment ie Butterfly Valves with connection MS/GI Specials and accessories with pressure meters and safely Saves etc. Microfilters (imported) rotary clean Disc Micro Filter 5 microns or 6000 mesh with accessories (4 nos) filtermedia: (A) First stage treated termedia (Quartz "Granules) of suitable 950 MB.Chlorinator gefeated chlorine) necessary doser and other equipment including transport of filter assembly filter media and instalation equipment at the identified side commissioning of the system, trailrun and necessary training to the local person including miscellaneous. Expenses and cost supply errection training and maintenance for two years for micro filter. The work should be executed as per specification drawings and other instructions issued by Engineer-in- charge including cholorination with liquid/gas chlorination and O&M For training to the operators etc.. complete for Providing 2 MLD.

Supply, Transportation & Fixing of 7.5 HP (100x75) Three phase open well ISI submersible motor pumpset confirms to IS 14220:1994 including cost and conveyance of all materials and labour charges etc., complete.

Supply, Transportation & Fixing of 3HP Single phase open well ISI submersible motor pumpset confirms to IS 14220:1994 including cost and conveyance of all materials and labour charges etc., complete.

Fabrication, transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp 10. etc complete for 3 phase motor pump sets. (1) Voltmeter ; 0-500 V 96x96mm size - 1No Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (2) 0 to 20 Amps / 0-50 Amps Ammeter (96x96mm size) - 1No. L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (3) Single phase preventor of suitable range - 1No.Makes: L&T / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells. (4) 32 A TP, 10KA MCB. - 1No (5) Indication lamps (R-Y-B) with switch control - 1set (6) Voltmeter & Ammeter selector switch - 2 Nos of Supply and fixing of ISI Mark suitable capacitor For 7.5HP Pump set with DOL starter

Fabrication, transportation, supply and fixing of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, contractor, starting and running capacitors, voltmeter, ammeter, indicator lamps, MCB, on/off switch including supply and fixing of DOL starter of complete, including cost and conveyance of all materials and labour charges etc., complete. for 3HP single phase pump set

Supply & Fixing of 3 core 4 swmm ISI maker Flat copper cable of ISI for submersible motors confirming to 694:1990, Makes: as per list of recommended brands as category I including cost and conveyance of all materials and labour charges etc., complete.

Supply and fixing of GI pipes including the cost and conveyance of all materials and labour charges for laying & jointing of GI pipes as per standard data