Eight Regional Water Supply Project

Name of Work:- Deepening of existing 813 mm dia M.S. pipe and errection of 150mm dia C.I. air valve including

providing and fixing air raiser pipe on existing 813 mm dia M.S. pipe line at Lakhani, From Lakhani to Tharad

section under M & R to Eight RWSS 2026-27

Sr. No. Description of Materials Qty. to be supplied Rate Unit Place of Delivery

Free of Gola HW Ta.

1 813 mm dia & 7.1 mm thick 48 Rmt

1 The Contractor submitting the tender should see that the rate in Schedule - A (of tender documents)

are filled by the Engineer in charge prior of the time of issue of tender.

2 Any additional materials to be supplied free of cost as per Schedule-A if found necessary at the time of

execution will be supplied to the contractor free of cost.

3 Any materials other than that provided in Schedule-A if required for the labour items of Schedule-B

issued on request to the contractor provided the same are available with department at prevailing

4 The contractor shall provide his own arrangement at his own cost for loading, unloading and transport

to the site of work for the material stipulated in Schedule-A.

5 Those works will be executed which are found necessary at the time of execution, contractor will not be

entitle for any claim for saving in any items as per site condition.

6 The rate of recovery for short fall or damage of material issued free of cost will be present S.O.R. plus

3% storage charge or rates of Board R/C Plus 3 % storage whichever is higher.

7 No negotiation at present in from and hence contractor should quote their rates accordingly.

8 The sub contract, if any given by the contractor would not create any right against the Board.

9 The Amount Recoverable from the contractor by the Gujarat water supply and sewerage board on any

account shall be liable to be recovered from the amount payable to the contractor / suppliers.

10 After passing the bill fund shall be demanded to higher authority payment shall be made after getting

fund from higher authority.

11 Labour Cess under the prevailing rules of the Government Resolution shall be borne by the bidder.

(Present rate is 1%).

12 Royalty on Minerals Consumed in works from End User under the prevailing rules of the Government

Resolution Dt. 18/06/2016 shall be borne by the bidder.

13 The contractor has to supply all the equipment / accessories / materials & components as per GWSSB’

approved vendor list only. Prevailing approved vendor list is uploaded on www.gwssb.org website.

However any addition (approved by the competent authority of Board) in makes / brands of equipment

etc. during bidding process, shall automatically apply. In case of items not explicitly mentioned in

vendor list the same shall be supplied as per relevant national / international standard of reputed

makes with prior approval from the Chief Engineer.

Date & signature of Deputy Executive Engineer Executive Engineer

contractor P.H. Sanitary Sub Division P.H. Works Division

Name of Work:- Deepening of existing 813 mm dia M.S. pipe and errection of 150mm dia C.I. air valve including

providing and fixing air raiser pipe on existing 813 mm dia M.S. pipe line at Lakhani, From Lakhani to Tharad section

under M & R to Eight RWSS 2026-27

Qty. Unit Item Rate Per Amount

Excavation for pipe line trenches for water supply,

sewerage line, manhole etc. all with shoring and struting if

required as per required gradient and line including safety

provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc.

complete for all lifts and strata as specified.

Up to 0.00 to 1.50 M. depth

760.00 Cum In all sorts of soil and soft murrum 89.00 Cum

1.50 to 3.00 M. depth

220.00 Cum In all sorts of soil and soft murrum 98.00 Cum

Gas cutting (Either square cut or V cut) pipes, plates etc.

including all costs for the followng thickness.

120 Rmt Above 5 mm Up to 10 mm 56.00 Rmt

Removing of existing pipeline incl. removal of specials,

valves jointing material including carting and stacking of

removed material from site of work to the department

store or as directed by Engineer-incharge excl. excavation

260.00 Rmt A) 813 mm dia & 7.1 mm thick 209.00 Rmt

Lowering, laying, Jointing & welding in position to correct

line & level M.S. Pipe with outer gunniting & inside

lining/Epoxy painting on pedestal or chairs upon prepared

formation or prepared bedding in trenches the rates

include conveyance from store to site of work loading,

unloading, joint plastering, hydrotesting etc.complete

305.00 Rmt A) 813 mm dia & 7.1 mm thick 1,052.00 Rmt

Refilling the pipeline trenches incl. ramming, watering,

830 Cum consolidating desposal of surplus stuff as directed within a 22.00 Cum

radious of 3 km.

Manufacture, supply & delivery of MS specials plain &

Socket ends suitable to MS pipe.

2700 Kg above 300 mm 96.00 Kg

Providing and supplying C. I. Air valves of approved make

& quality of following class and diameter including all

taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

site of work, stacking etc. complete.

2 No 150 mm dia. C.I. D/A air valve (DS2 Type) 12,384.00 No

Lowering, laying and jointing in position following C.I. D/F

Sluice valves and air valve including cost of all labour,

jointing materials, including nut bolts and giving

satisfactory hydraulic testing etc. complete.

2.00 No 150 mm dia. C.I. D/A air valve (DS2 Type) 605.00 No

Qty. Unit Item Rate Per Amount

Charges for installation of Air Riser (Flange pipe) on the

pipeline at suitable place as per design & directed by

Engineer-in-charge including proving & fixing G.I. Pipe,

M.S. Flange, R.C.C. Foundation Block and Column in

C.C. M-150 including welding, errecting the pipe (Incld.

cost of all materials & labourbut excluding the cost of C.I.

air valve) etc. complete. The length of air raiser pipe is

2.00 No For 150 mm dia D/A airvalve on 813 mm dia. MS pipeline) 18,547.00 No

Labour charges for repairingof leakage in MS pipeline of

follwing dia meter at different places including necessary

excavation manually or by mechanise excavation,

dewatering, removing of mud, cleaning of pipe and

leakage portion, grinding, cutting the pipeline or jointif

necessary incl. welding the joint by using ISI marked

welding rods duly approved by EIC of appropriate number

and size inclusive of excavator, Hydra/crane, D.G. set,

welding machine, Gas cutter with LPG cylinder, Oxygen

cylinder, Grinding machine etc. with fuel, operator &

2.00 No 813mm dia 9,771.00 No

Providing epoxy coating to inside pipe line with two parts

of Solvent free high build liquid epoxy lining as per AWWA

(210-07 Suitable for potable water application & shall be

approved by CFTRI- India/BS 68920-UK/finternational

standard /NSF/ANSI/-61 2004 to be fit for contact with

potable water for human consumption with 406 micron

thickness. inclusive of necessary maternals ,labour

31.91 Smt Equipment

A) 813 mm .Contractor's

dia & 7.1 mmoverhead

thick charges and profit and 332.00 Smt

Tranportation of pipes from Gola HW to site of work near

Lakhani including all cost of machinary, loading,

1.00 Trip 8,923.00 Trip

unloading, stacking as per instrcutions of EIC including

fuel cost, operation cost, labour etc complete.

I / WE am /are willing to carry out the work …………………..Above …………… Below………………………….% age

(Percentage should be written in figure and words) the tender rate mentioned above amount of My/ Our tender work put as

1) Estimated cost put to tender; 1) Estimated cost put to tender;

Note.:- Please strike out which ever is not applicable.

Date & signature of Deputy Executive Engineer Executive Engineer

contractor. P.H. Sanitary Sub Division Public Health Works Division