Providing & Supplying Furniture at Fourth & Fifth Floor at District Court Building Patan, District : Patan.

Name of Work :-

Providing & Supplying Furniture at Fourth & Fifth Floor at District Court Building Patan, District :

Bill of Quantity

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

1 4.00 Providing and Arranging Dias chair having overall

height of 1.52 mt., Back Support 75mm x 35mm size,

Armrest/handle 75mm 30mm size, Back & front leg of

60mm dia, support frame size 75mm x 35mm. Back

Logo (National emblem) of approved design & made

from bronze metal of size 150mm x 30 mm to be

fixed on top of chair back of size 225mm x35mm

made from teakwood framework. Whole chair shall

be made from Indian teakwood and shall be

Thousand Four Hundred

molded/shaped having members as shown in the

Seven And Paise Ninety

drawing/photograph or approved design directed by

11407.95 Five Only Nos

2 4.00 Providing & Supplying Judges court room wooden

dais table of size 2.40 X 1.20 X 0.76 mt. with using

best quality Indian teak wood size and 18mm thick

WP plywood with all necessary materials and 4.0 mm

thick decorative veneer sheet with all exposed

wooden and ply members shall be semi glossy

Rupees Thirty Five

melamine polished including sand papering and

making edges smooth with necessary other fixtures

Hundred Forty Four And

and fastenings etc. complete or as directed by the

35744.91 Paise Ninety One Only Nos

Engineer in Charge.

3 11.00 Providing & Supplying Acrelic writting deck adjustable

height acrilic table top alivator inclined eassy reading

deck office tabl top as directed by engineer incharge. Rupees Five Thousand

(580mm x 400mm) Five Hundred Fifty Five

5555.00 Only Nos

4 4.00 WITNESS BOX

Providing & Supplying Witness Box having size

(L) x 750 (W) x 1200 (H) MM height made up of

Indian teakwood with special carving having base

frame 18mm thick ply wood of IS 710 of approved

brand covered with 1,5mm thick laminate of approved

brand,shade, pattern, having 1.20m high wooden

railing on three sides with 75mm x 75mm size

wooden pillars at all corner and hand rail at top

carved out as per detail drawings, 50mm x 50mm

wooden battens in railing and with provision of writing

desk made from laminated plywood of IS 710. All

wooden parts should be polished with 2 sealer coat

and 3 melamine polish coats. The work also includes

all necessary hardware, fixtures and fasteners etc.

The cost including loading,unloading and Rupees Twenty One

Transportation Charges ect. As per choice of users Thousand Two Hundred

department and Concern officers in charge as Fifty Three And Paise

directed by the engineer incharge. 21253.43 Forty Three Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

5 4.00 ACCUSED BOX

Providing & Supplying Witness Box having size

(L) x 750 (W) x 1200 (H) MM height made up of

Indian teakwood with special carving having base

frame 18mm thick ply wood of IS 710 of approved

brand covered with 1,5mm thick laminate of approved

brand,shade, pattern, having 1.20m high wooden

railing on three sides with 75mm x 75mm size

wooden pillars at all corner and hand rail at top

carved out as per detail drawings, 50mm x 50mm

wooden battens in railing and with provision of writing

desk made from laminated plywood of IS 710. All

wooden parts should be polished with 2 sealer coat

and 3 melamine polish coats. The work also includes

all necessary hardware, fixtures and fasteners etc.

The cost including loading,unloading and Rupees Twenty One

Transportation Charges ect. As per choice of users Thousand Two Hundred

department and Concern officers in charge as Fifty Three And Paise

directed by the engineer incharge. 21253.43 Forty Three Only Nos

6 32.50 WOODEN RAILING :-

Providing, making and fixing dias railing in court room

to be made from Teak wood of 1200mm height,

having 100mmx100mm size wooden vertical posts at

specified intervals and50mmx50mm wooden battens

in between, connected byhorizontal rail of

100mmx75mm at top, carved out as per detail

drawings, provision of gate at one end shall be

provided as per detail design drawings. All wooden

parts should be polished with 2 sealer coat and

melamine polish coats. The work also includes fixing

railing in flooring with neccessry anchoring, all Rupees Five Thousand

necessary hardware, fixtures and fasteners etc. Three Hundred Fifty Five

complete as per Architect drawing and instruction of 5355.02 And Paise Two Only Sq.mt

7 8.00 this Office TABLE

Size-2100mm x 750mm x 750mm

Providing and supplying Table of overall

2100X750X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick MR grade

plywood (M2), as per architect drawing finished with

standard 1.0 mm thick laminate (M24) on uper portion

& 0.8 mm thick laminate liner (M25) on bottom as

specified & approved by architect. Fixed with

Rupees Ten Thousand

necessary fixtures and fastening (Hardware) (M14) as

Five Hundred Eighty Six

per architect drawing. All edges shall be covered with

And Paise Eighty Two

required PVC edge beading of matching color.

10586.82 Only Nos

8 8.00 ARGUMENT DESK

Desk Size-600mm x 450mm & front height 300mm

back height 225mm (i.e. slanting position)

Providing and Arranging Two side argument desk

made of 118mm thick ply wood of IS 710 of

approved brand, finished with standard 1.0 mm thick

Rupees Two Thousand

laminate (M24) approved by architect. Fixed with

Eight Hundred Seventy

necessary fixtures and fastening (Hardware) (M14).

Four And Paise Forty Six

All edges shall be covered with required PVC edge

2874.46 Only Nos

beading of matching color.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

9 8.00 HIGH BACK REVOLVING & TILTING EXECUTIVE

Providing and Supplying High back Chair with Metal

frame work.Upholstered with Artificial

Leather/Leatherette and molded PU Foam,together

with molded seat & back covers.The back foam

should be designed with contoured lumber support for

extra comfort.caster of High durability & hydraulic.The

Chair should have cylinder with 5 year warranty.The

Size of Chair 53cm X 79 cm(Back Side) and 51 Cm X

49 cm(Seat Size).The PU Foam Should be molded

with density =45+ 2 kg/m3 with One-piece

armrests.The armrests are scratch and weather

resistant.The permanent contact mechanism is

designed with 360° revolving type,12° seat tilt 19°

Back tilt,Front pivot for tilt with feet resting on ground

ensuring more Comfort,Tilt tenstion adjustmen,5

position locking with anti-Shock back

Mechanism,Which Should Prevent the beckrest from

impacting the user when the lock is released,Static Rupees Seventeen

seat depth adustment=0.5 cm 5 Position Locking. Thousand Three

Approved Make to be used as given in Schedule of Hundred Twenty Six And

Approved Makes (M39) 17326.55 Paise Fifty Five Only Nos

10 89.00 MEDIUM BACK REVOLVING & TILTING

EXECUTIVE CHAIR

Providing and Supplying Medium back Chair with

Metal frame work.Upholstered with Changeable fabric

upholstery covers(as per requirement) and molded

PU Foam,together with molded seat & back

Covers.The back foam should be designed with

contoured lumber support for extra comfort.caster of

High durability & hydraulic.The Chair should have

cylinder with 5 year warranty.The Size of Chair

cm X 58 cm(Back Side) and 49 Cm X 48 cm(Seat

Size).The PU Foam Should be molded with density

=45+ 2 kg/m3 with One-piece armrests.The armrests

are scratch and weather resistant.The permanent

contact mechanism is designed with 360° revolving

type,with pneumatic height adjustment & 17° Rupees Thirteen

Maximum tilt tenstion adjustment facility. Thousand Nine Hundred

Approved Make to be used as given in Schedule of Fourteen And Paise

Approved Makes (M39) 13914.77 Seventy Seven Only Nos.

11 78.00 LOW BACK REVOLVING & TILTING CHAIR

Providing and Supplying Low back Chair with Work

Center & Other Staff the Seat & Back are Made of

Metal frame work.Upholstered with Changeable

Fabric upholstery covers(as per requirement) and

molded PU Foam,together with molded seat & back

Covers.The back foam should be designed with

contoured lumber support for extra comfort.caster of

High durability & hydraulic.The Chair should have

cylinder with 5 year warranty.The Size of Chair 45 cm

X 45 cm(Back Side) and 45 Cm X 43 cm(Seat

Size).The PU Foam Should be molded with density

=45+ 2 kg/m3 with One-piece armrests.The armrests

are scratch and weather resistant.The permanent

contact mechanism is designed with 360° revolving

type,with pneumatic height adjustment & 17°

Maximum tilt tenstion adjustment facility.

Approved Make to be used as given in Schedule of Rupees Eight Thousand

Approved Makes (M39) Two Hundred Eighty Five

8285.03 And Paise Three Only Nos.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

12 347.00 VISITOR OR GUEST CHAIR

Providing and Supplying Visitor or Guest Chair the

Seat & Back are Made of 12mm thick hot-Pressed

plywood upholstered with Changeable Fabric

upholstery Covers (as per Requirement) and molded

PU Foam,together with molded seat & Back

Covers.The back foam should be designed with

contoured lumber support for extra Comfort.The Size

of Chair 45cm X 38cm(Back Side) and 45cm X

43cm(Seat Size).The PU Foam Should be Molded

with density =45+ 2 kg/m3.The Armrest with Leg

made with Powder Coated MS Structrure as per

architect selection.The Seat and Back Fixed with MS Rupees Seven Thousand

Structure with Required Necessary Hardware. Four Hundred Sixty Four

Approved Make to be used as given in Schedule of And Paise Ninety One

Approved Makes (M39) 7464.91 Only Nos.

13 34.00 COURT BENCH

Size - 1650mm x 450mmx 400 (3 SEATER)

Providing, Arranging & Fixing 3 seater wooden chair

bench (bakada),with individual armrests. Cross beam,

legs and armrest structure made of powder coated

circular MS ERW tube having 35 mm dia size.

Seatsmade fromindian Teakwood 50mm x 25mm

Patti, backrest from 25mm X25mm Patti& 50mm x

25mmarmrest with smooth edge moulding as per

design. All wooden member to be melamine polish.

Including all materials and labour etc. The completed

wooden bench shall be movable or fixed to the floor Rupees Twelve

with necessary fixture, fasteners and all Complete as Thousand Seven

per drawing/ photograph and instruction of this Office. Hundred Seventy Six

12776.50 And Paise Fifty Only Nos.

14 7.00 Judge's Table Size: 1800 x 900 x 750mm

Side Unit Size: 1200 x 450 x 750mm

Providing and supplying Table of overall

1800X900X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick ply wood of IS

710 of approved brand, as per architect drawing

finished with standard 10 mm thick laminate (M24) on

outside portion & 0.8 mm thick laminate liner (M25)

inside as specified & approved by architect. Fixed

with necessary fixtures and fastening (Hardware)

(M14) as per architect drawing. All edges shall be

covered with required PVC edge beading of matching

color The modesty panel having 18mm thick ply

wood of IS 710 of approved brand with standard

mm thick laminate (M24) on both side with 1.0mm

groove on outer side.

Provide Plastic Computer Desk Table Grommet

Cable Wire Outlet Hole Cover 60mm, Key-board trey,

Drawers with telescopic roller channels (MIS), Handle

(M19) and locking (M16) arrangements with all

necessary fixtures and fastening (M14) Provide Rupees Forty Two

Shutters as per drawing fixed with handle (M191, Thousand Six Hundred

hinges (M18), magnet (M14), of approved by architect Eighty Five And Paise

complete as per Architect drawing and instruction of 42685.63 Sixty Three Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

15 22.00 Staff Table Size: 1500 x 750 x 750mm

Side Unit Size: 900 x 450 x 750mm

Providing and supplying Table of overall

1500X750X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick MR grade

plywood (M2), as per architect drawing finished with

standard 1.0 mm thick laminate (M24) on outside

portion & 0.8 mm thick laminate liner (M25) inside as

specified & approved by architect. Fixed with

necessary fixtures and fastening (Hardware) (M14) as

per architect drawing. All edges shall be covered with

required PVC edge beading of matching color. The

modesty panel having 18mm thick MR grade

plywood(M2) with standard 1.0 mm thick laminate

(M24) on both the side.

The table top shall be supported by MS CRCA Pipe

framing of 50mm x 25mm x 1.8mm size, with legs of

50mm x 50 mm x 1.6 mm size, finished with epoxy

powder coated of 50 micron thickness as per

drawing/photograph and details. (Refer drawing).

Provide Plastic Computer Desk Table Grommet

Cable Wire Outlet Hole Cover 60mm, Key-board trey, Rupees Twenty Six

Drawers with telescopic roller channels (M15), Handle Thousand One Hundred

(M19) and locking (M16) arrangements with all Ninety Eight And Paise

necessary fixtures and fastening (M14). Provide 26198.39 Thirty Nine Only Nos

16 11.00 Staff Table Size: 1200 x 6000 x 750mm

Side Unit Size: 900 x 450 x 750mm

Providing and supplying Table of overall

1200X600X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick ply wood of IS

710 of approved brand, as per architect drawing

finished with standard 1.0 mm thick laminate (M24)

on outside portion & 0.8 mm thick laminate liner

(M25) inside as specified & approved by architect.

Fixed with necessary fixtures and fastening

(Hardware) (M14) as per architect drawing. All edges

shall be covered with required PVC edge beading of

matching color. The modesty panel having 18mm

thick MR grade plywood(M2) with standard 1.0 mm

thick laminate (M24) on both the side.

The table top shall be supported by MS CRCA Pipe

framing of 50mm x 25mm x 1.8mm size, with legs of

50mm x 50 mm x 1.6 mm size, finished with epoxy

powder coated of 50 micron thickness as per

drawing/photograph and details. (Refer drawing).

Provide Plastic Computer Desk Table Grommet Rupees Fifty Three

Cable Wire Outlet Hole Cover 60mm, Key-board trey, Thousand One Hundred

Drawers with telescopic roller channels (M15), Handle Ninety Four And Paise

(M19) and locking (M16) arrangements with all 53194.68 Sixty Eight Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

17 13.00 STAFF TABLE-3

Table Size: 1200 x 600 x 750mm

Providing and supplying Table of overall

1200X600X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick ply wood of IS

710 of approved brand, as per architect drawing

finished with standard 1.0 mm thick laminate (M24)

on outside portion & 0.8 mm thick laminate liner

(M25) inside as specified & approved by architect.

Fixed with necessary fixtures and fastening

(Hardware) (M14) as per architect drawing. All edges

shall be covered with required PVC edge beading of

matching color.

The modesty panel having 18mm thick MR grade

plywood(M2) with standard 1.0 mm thick laminate

(M24) on both the side.

The table top shall be supported by MS CRCA Pipe

framing of 50mm x 25mm x 1.8mm size, with legs of

50mm x 50 mm x 1.6 mm size, finished with epoxy

powder coated of 50 micron thickness as per

drawing/photograph and details. (Refer drawing).

Provide Plastic Computer Desk Table Grommet Rupees Thirteen

Cable Wire Outlet Hole Cover 60mm, Key-board trey, Thousand Six Hundred

Drawers with telescopic roller channels (M15), Handle Ninety Five And Paise

(M19) and locking (M16) arrangements with all 13695.35 Thirty Five Only Nos

18 3.00 STAFF TABLE-4

Table Size: 1100 x 600 x 750mm

Providing and supplying Table of overall

1200X600X750 size with thickness of Top 32 mm and

structure shall be made of18mm thick ply wood of IS

710 of approved brand, as per architect drawing

finished with standard 1.0 mm thick laminate (M24)

on outside portion & 0.8 mm thick laminate liner

(M25) inside as specified & approved by architect.

Fixed with necessary fixtures and fastening

(Hardware) (M14) as per architect drawing. All edges

shall be covered with required PVC edge beading of

matching color.

The modesty panel having 18mm thick MR grade

plywood(M2) with standard 1.0 mm thick laminate

(M24) on both the side.

The table top shall be supported by MS CRCA Pipe

framing of 50mm x 25mm x 1.8mm size, with legs of

50mm x 50 mm x 1.6 mm size, finished with epoxy

powder coated of 50 micron thickness as per

drawing/photograph and details. (Refer drawing). Rupees Thirteen

Provide Plastic Computer Desk Table Grommet Thousand Three

Cable Wire Outlet Hole Cover 60mm, Key-board trey, Hundred Eighty Three

Drawers with telescopic roller channels (M15), Handle And Paise Fifty Seven

(M19) and locking (M16) arrangements with all 13383.57 Only Nos

19 6.00 Coat Stand: 650mm x 650mm x 1500mm (H)

Providing, Arranging & fixing wooden coat stand

made of Indian teakwood size-vertical member 85mm

x 85mm. with bottom cross design teakwood member

of 75mm x 75mm. 4nos supporting legs for vertical

member as per design with melamine polish including

Moulding edges. With teakwood single hanger of

standard size (85mm x 85 mm) along with 2 no. brass

hook at top, including all materials and labours etc.

complete as per drawing and instruction of this Office.

Indian teakwood shall be used for the entire structure Rupees Five Thousand

with polished smooth edge and shape, necessary Eight Hundred Eighty

joinery with melamine polish finish as per photo and Eight And Paise Thirty

directed by this Office. 5888.30 Only Nos.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

20 13.00 THREE SEATER SOFA

Providing & Supplying sofa The structure will be

made in solid wood and plywood where ever required

. the structure shall have copper spring base with

elastic belts with foam/jute covering on top. The

seat/Back where ever required . shall have

density foam of 125MM thickness with LEATHER

Tapestry designed to give comfort with quality etc.

The quoting price should be inclusive of all types of

taxes & duties ,packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our

technical specifications and make. Approved Make :-

GodrejBibbin / Nilkamal Novelty /Durian Fiona . As

per choice of users department and Concern officers

in charge as directed by the Architect/Engineer. Rupees Thirty Thousand

(Strictly Supply Make :- Godrej RIO / Nilkamal Eight Hundred Thirty And

Novelty /Durian Fiona ) 30830.25 Paise Twenty Five Only Nos

21 13.00 Two seated sofas

Providing and supplying sofa(2seater) made with

using 19mm Thk. Plywood (M1) structure frame with

S.S. legs required necessary support fixed with

necessary fixtures and fastening (Hardware)(M14). It

shall be covered with 32 Density PU foam(M22) with

required Thickness as per design in seat & back and

handle portion this should be again covered with

mm thick PU foam (M22) with Madarpat cover on it &

upholstered fabric(M26) or leather of suggested &

approved by architect finished with seat, back & all Rupees Twenty Three

visible side as per architect drawing. Complete as per Thousand Nine Hundred

architect's drawing and as per instruction of architect Fifty Nine And Paise

& engineer in charge. (Refer drawing) 23959.22 Twenty Two Only Nos

22 1.00 SINGLE SEATER SOFA

Providing & Supplying The structure will be made in

solid wood and plywood where ever required . the

structure shall have copper spring base with elastic

belts with foam/jute covering on top. The seat/Back

where ever required . shall have 32 density foam of

125MM thickness with LEATHER Tapestry designed

to give comfort with quality etc. The quoting price

should be inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading, installaion.

Supplied strictly as per our technical specifications

and make. Approved Make :-GodrejBibbin /

Nilkamal Novelty /Durian Fiona . As per choice of

users department and Concern officers in charge as Rupees Sixteen

directed by the Architect/Engineer. Thousand Six Hundred

(Strictly Supply Make :- Godrej RIO / Nilkamal Fifteen And Paise Fifty

Novelty ) 16615.51 One Only Nos

23 18.00 Providing & supplying side table of overall

450x450x400 mm size with Kiln dried & treated

quality Teak Wood (M5) as per reference drawing

with necessary fixtures and fastening (Hardware)

(M14) inclusive of approved mealamine polishing (M

29) work and anti-skid leg pads. Top part of centre Rupees Six Thousand

table covered with 12mm th toughened Gtlass (M27) One Hundred Ten And

with polished edges. 6110.50 Paise Fifty Only Smt

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

24 6.00 CENTER TABLE

Providing and supplying Table of overall

1000X500X400 size structure shall be made of 18mm

thick ply wood of IS 710 of approved brand with

4mm thick veneer(M23). All edges shall be covered

with required Teak wood beading Patti (M4) finished

with approved melamine polishing (M29) work. Table

Top covered with 8 mm Thk. toughened Glass (M27)

with Polished Edges. Fixed with necessary fixtures

and fastening (Hardware) (M14) Complete as per

Rupees Five Thousand

architect's drawing and as per instruction of this office

One Hundred Six And

(Refer drawing)

5106.56 Paise Fifty Six Only Nos.

25 14.00 WOODEN CUP BOARDS (LOW HEIGHT)

Providing and supplying Low Height Storage unit of

overall 1100 x 450 x 900 mm size made with using

18mm thick ply wood of IS 710 of approved brand

structure and finished with 1.0 mm Thk. decorative

laminate(M24) sheet on outside & and 0.8 mm Thk.

liner laminate(M25) on inside as specified / approved

by architect with fixed with necessary fixtures and

fastening (Hardware) (M14), as per architect drawing.

The similar Ply + laminate made shutter shall be fixed

with required handle (M19), hinges (M18)., magnet

(M18) & Locks (M16) complete with bidding patties

(M4) and all required hardware (M14). Ply shelves

removable Type supported on side teak wood (M5)

battens on both sides. All exposed edges shall be

covered with 8 mm Thk. Teak wood beading Patti

(M4) finished with melamine polish (M29). Complete Rupees Thirteen

or as directed as per architect drawing and as per Thousand Seven

instruction of architect & engineer in charge. Hundred Seventy And

13770.34 Paise Thirty Four Only Nos.

26 74.00 WOODEN CUP BOARDS (FULL HEIGHT)

Providing and supplying Low Height Storage unit of

overall 1100 x 450 x 2100 size made with using

18mm thick ply wood of IS 710 of approved brand

structure and finished with 1.0 mm Thk. decorative

laminate(M24) sheet on outside & and 0.8 mm Thk.

liner laminate(M25) on inside as specified / approved

by architect with fixed with necessary fixtures and

fastening (Hardware) (M14), as per architect drawing.

The similar Ply + laminate made shutter shall be fixed

with required handle (M19), hinges (M18)., magnet

(M18) & Locks (M16) complete with bidding patties

(M4) and all required hardware (M14). Ply shelves

removable Type supported on side teak wood (M5)

battens on both sides. All exposed edges shall be

covered with 8 mm Thk. Teak wood beading Patti Rupees Eighteen

(M4) finished with melamine polish (M29). Complete Thousand One Hundred

or as directed as per architect drawing and as per Sixteen And Paise Thirty

instruction of architect & engineer in charge. 18116.37 Seven Only Nos.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

27 12.00 Full Height cupboard with glass

Size: 1200mm x 450mm x 2100mm

Providing and supplying Full Height Storage, unit

made with using 18mm thick ply wood of IS 710 of

approved brand structure and finished with 1.0 mm

Thk. decorative laminate (M24) sheet on outside &

inside as specified/approved by architect, fixed with

necessary fixtures and fastening (Hardware) (M14),

as per architect drawing. The similar Ply laminate

made shutter shall have 8mm, thk. Glass, fixed with

required handle (M19), hinges (M18), magnet (M18) &

Locks (M16) complete with bidding patties (M4) and

all required hardware (M14). Ply shelves removable

Type supported on side teak wood (M5) battens on

both sides. All exposed edges shall be covered with

required Teak wood beading Patti (M4) finished with Rupees Twenty One

melamine polish (M29). Complete or as directed as Thousand Three

per architect drawing and as per instruction of this Hundred Ninety Six And

office. 21396.85 Paise Eighty Five Only Nos.

28 365.51 ROLLER BLINDS

Providing and supplying Roller Blinds assemblies are

to be supplied & installed in all windows with great

precision. It should be water resistant and fitted on

aluminum head rails duly powder coated and fitted

with stainless steel drive rods. Manual operated and Rupees Two Thousand

should have ISI mark. Complete or as directed as per Nine Hundred Fifty One

architect & engineer in charge. (M34)) And Paise Twenty Two

2951.22 Only Sqmt

29 1.00 Providing and Installation of Conference Table made

with teak wood, overall size shall be 4650 mm long,

1500 mm wide and 75 0mm high with wooden

battens framing as per mentioned size with facia

patterns with CNC design. ( As per final drawing). All

wood work shall be of first class seasoned hard teak

wood of approved sample. Table Top : Top shall be

of 12 t0 15mm thick Italian/ Arificial stone / Quartz or

8-10 mm Corian as per selection or sample

approval.PVC/hard rubber shoe of 1st quality shall be

screwed all legs. Polish :Expose surface of teakwood

& all Veneer surfaces shall be polish in natural wood

PU polish or as approved by Architect or Site In-

charge strictly as per manufacturer’s instructions.

Make of Polish shall be by Asian Paints / Nerolac /

Berger. NOTE : Entire polish work shall be done in

the presence of Engr-in-Charge at site only. Rest all

other details & dimensions as shown in drwgs. Rupees Two Lakh(s)

Note: Sample approvals needs to be done for the Sixty Five Thousand One

same, once it's finalized further quantities to be Hundred Sixty Seven

executed after approval. 265167.42 And Paise Forty Two Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

30 35.90 CHAIN SPROCKET SYSTEM

Providing,Designing, Planning, Supplying,

Hosting,Installation of Compactor (Mechanically

Driven OperatingUnit. Including fixing in position with

adequate number of and well-designed fasteners in

position of approved make. The unit should be

designed as per enclosed technical specifications.

STEEL:- The System has been made from high

quality steel of furniture grade as per IS513 for CRCA

and IS 10748 for HRCA from Reputed Steel

manufactures like TATA, ESSAR, JINDAL. Relevant

test certificates should be submitted at the time of

supply of material. COLOUR:- The compactor

system is powder coated in approved Color in Pure

Polyester with 40-50 microns. BEARING:- Bearing

from reputed manufactures like NBC, NTN or

equivalent with corresponding test certificate only

should be used. CHAIN:- Only diamond or Roll-on

Brand chain to be used.

WHEEL:- Iron Die Cast with anti-rust

Zinc.Loading:1000kg/wheel. GUIDE RAIL:- Made of

at least 25mm Solid Steel with electroplated finish.

The dimension required for are as follows:

Storage Level In Each Unit = 6 level Adjustable

Rupees Thirty Five

1) Maximum numbers of can be planned in area as

Thousand Eight Hundred

mentioned in attached plan of an existing building.

Fifty One And Paise

35851.97 Ninety Seven Only Cu.mt

2) Central locking arrangement should be provided on

31 94.42 Providing & fixing 100mm th. Dry wall partition made

out of 75mm-c-studs-0.6mm th,max. Spacing 625mm

for framing work 12.5mm gypsum sheet (Fire rating-

up to 1 hour) on both side of framimng work fixed with

necessary fixtures and fastening (Hardware) (M14)

finished with necessary wall paint. Providing 60mm

Rupees Three Thousand

insulation-mineral wool with raw density ≥

Two Hundred Twenty

kg/cbm.min wall weight shall be 30 kg/sq.mt (Partition

Two And Paise Ninety

height to be as per drawing issued by architect)

3222.91 One Only Sq.mt

32 36.00 Supplying and Placing in position cupboard (M40)

made of CRCA steel with 4 adjustable shelves.Size

as per reference image. It shall have the shelf

thickness of 0.7 mm, back thickness of 0.8mm, door

thickness of 0.8mm (high yield strength) and all other

components shall have a thickness of 0.9mm.These

components shall be made of CRCA 'D' grade high

yield strength as per IS:513. The Store well shall

have a Mazak handle and Three way locking

mechanism (M16) with Shooting Bolts. It should have

a height wise adjustable shelf mounting which shall

have a Uniformly Distributed Load Capacity of max Rupees Twenty Six

40 Kg. All steel parts to be powder coated with high Thousand One Hundred

quality powder after 10 tanks Anti-Rust treatment. 26108.50 Eight And Paise Fifty Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

33 2.00 COMPUTER TABLE SIZE: - 1000 x 600 x 750mmn

Providing and supplying Table of overall

1000X600X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick ply wood of IS

710 of approved brand, as per architect drawing

finished with standard 1.0 mm thick laminate (M24)

on outside portion & 0.8 mm thick laminate liner

(M25) nside as specified & approved by architect.

Fixed with necessary fixtures and fastening

(Hardware) (M14) as per architect drawing.All edges

shall be covered with required PVC edge beading of

matching colour. The modesty panel having 18mm

thick ply wood of IS 710 of approved brand with

standard 1.0mm th lamainate (M24) on both side.

The table top shall be supported by MS CRCA Pipe

framing of 50mm x 25mm x 1.8mm size, with egs of

50mm x 50 mm x 1.6 mm size, finished with epoxy

powder coated of 50 micron thickness as per

drawing/ photograph and details. (Refer

drawing).Provide Plastic Computer Desk Table Rupees Fifteen

Grommet Cable Wire Outlet Hole Cover 60mm, Key- Thousand Three

board trey, Drawers with telescopic roller channels Hundred Ninety Five And

(M15), Handle (M19) and locking (M16) arrangements 15395.43 Paise Forty Three Only Nos

34 8.97 Wooden Stage

SIZE: 6000 x 1800 x 170mm

Providing and supplying seminar hall stage made with

using 18mm thick ply wood of IS 710 of approved

brand and good quality teak wood (M5) frame

structure with required necessary legs support fixed

with necessary fixtures and fastening (hardware)

(M14) All exposed edges shall be covered with

required teak wood beading Patti (M4). The whole

stage finished with approved superior quality

synthetic enamel paint of standard make and ISI Rupees Five Thousand

market confirming to IS-2392 shall be applied. Eight Hundred Seventy

Complete as per architect's drawings and as per Three And Paise Fifteen

instruction of this office (Refer drawings) 5873.15 Only Sq.mt

SIZE: 680 x 380 x 1400 mm

Providing and supplying Podium made with using

18mm thick ply wood of IS 710 of approved brand

structure finished with 1.0 mm Thk laminate (M24)

sheet approved by architect fixed with necessary

fixtures and fastening (Hardware) (M14). All edges

shall be covered with required Teak wood beading

Patti (M4) finished with approved melamine polishing

(M29) work. The podium shall also have provision for

carrying wires & mounting electrical plug point, Rupees Nine Thousand

switches & mike etc. Complete as per architect's One Hundred Forty Five

drawings and as per instruction of this office. 9145.55 And Paise Fifty Five Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

36 4.00 Mediation Table Size: 1800 x 900 x 750mm

Providing and supplying Table of overall

1800X600X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick ply wood of IS

710 of approved brand, as per architect drawing

finished with standard 1.0 mm thick laminate (M24)

on uper portion & 0.8 mm thick laminate liner (M25)

on bottom as specified & approved by architect. Fixed

with necessary fixtures and fastening (Hardware)

(M14) as per architect drawing All edges shall be

covered with required PVC edge beading of matching

The table top shall be supported by MS CRCA Pipe

framing of 50mm x 25mm x 1.8mm size, with legs of

50mm x 50 mm x 1.6 mm size, finished with epoxy Rupees Ten Thousand

powder coated of 50 micron thickness as per Seven Hundred Twenty

drawing/photograph and details. (Refer drawing) Six And Paise Twenty

10726.20 Only Nos

37 2.00 Conciliation room's table

Table Size:-2400 x 1000 x 750mm

Providing and supplying Table of overall

2400X600X750 size with thickness of Top 32 mm and

structure shall be made of 18mm thick ply wood of IS

710 of approved brand, as per architect drawing

finished with standard 1.0 mm thick laminate (M24)

on uper portion & 0.8 mm thick laminate liner (M25)

on bottom as specified & approved by architect. Fixed

with necessary fixtures and fastening (Hardware)

(M14) as per architect drawing. All edges shall be

covered with required PVC edge beading of matching

The table top shall be supported by MS CRCA Pipe

framing of 50mm x 25mm x 1.8mm size, with legs of

50mm x 50 mm x 1.6 mm size, finished with epoxy Rupees Fourteen

powder coated of 50 micron thickness as per Thousand One Hundred

drawing/photograph and details. (Refer drawing). Ten And Paise Seventy

14110.71 One Only Nos

38 20.00 Waiting Bench

Visitor Group Seating Size (Group Chair-4 Seater):-

SIZE: 2325 X 710 X 775MM

Providing Visitor's group seating of four and two

people,Chair Seat: Made from perforated high quality

cold rolled sheet, pressed and welded to form the

shape, coated with epoxy powder.Decorative Edge:

High quality metal is bent to form the shape and Then

the surface is polished to perfection.Arm/Leg and

Cross bar: Mild steel tube/sheet is welded to form the Rupees Seven Thousand

shape, the surface is cleaned with acid to remove Four Hundred Thirty

rust, finished with Powder coating/Chrome plating. Eight And Paise Sixty

7438.65 Five Only Nos

39 1.00 White Board Size: 2500 x 1800 mm

Providing and fixing Projector screen 2500 x 1800 Rupees Fourteen

mm including Tripot as directed by engineer in charge Thousand Nine Hundred

with necessary tools & Plants. Ninety Eight And Paise

14998.50 Fifty Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

40 160.56 Providing and fixing on wall accostical paneling using

Slats L-16-2 of size 128mmx2430mmx16mm thick

upto 2400mm high as per the following specifiction :-

Slats L-16 - 2mm @16mm, 16 x 128 x 2430 mm high

grade Pine wood base Medium Density Fibre acoustic

boards with Tongue & Groove Edge,2mm slot

perforation @ 16mm centre, slates perforations,The

acoustic should be furnished with a Black absorbent

felt backing with an airflow resistance of 330-460

Ns/m³ (DIN 53887),wood partical core,NRC : should

be Upto 0.75,should meet the safety requirements

of EN 14190. Fixing :- Sound Strut CC18 screw fixed

horizontal/vertical to wall at every 600mm c/c. Metal

cleat can be fixed on top edges of SoundStrut CC18

fixed directly by staping to the SB25, SB50 which is

screw fixed directly to the wall where ever requierd

with a backingThe colour shade of malamine and

veneer as approved by Architect and as specified by

manufacturer including all accessories, material &

labour complete as directed by Architect / Engineer.

Rupees Five Thousand

Note: Sample approvals needs to be done for the Six Hundred Thirty And

same, once it's finalized further quantities to be 5630.75 Paise Seventy Five Only Smt.

41 4.00 Providing and Fixing national emblem 'Satyamev

Jayate' round logo plate made out of Brass with

engraving side circumference and embossing the

logo with buffing matt finish etc. complete as per Rupees Seventeen

existing sample in the main court and instruction by Thousand One Hundred

High Court Authority and Engineer in Charge. Seventy Six And Paise

Standard size. 17176.06 Six Only Nos

42 6.00 KIDS PLAY MAT

INTERLOCKING FLOOR MAT:

EVA Foam Interlocking Floor Mat, each 600 mm x

600 cm, 20-25 mm thick, Interlocking Puzzle Foam,

Multicolour Tiles should create a cushioned (Shock

absorbing can take repetitive shocks) and

comfortable surface on hard floors, Should create a

secure puzzle connection for a seam less

appearance, Detachable edge pieces enable versatile

Rupees Four Hundred

configurations as corner, border or center tiles,

Eighty Three And Paise

Expandable design, Safe for children, non-toxic.

483.79 Seventy Nine Only Smt.

43 2.00 DINING TABLE

Providing & supplying of Dining table with top size

1830 x 1000 x 760 (H) mm the entire structure made

out by S.S 304 grade Square pipe, 50 mm Ø with

mm wall thickness and table top made from 19mm

thickness BWP IS 710 ply with 1mm thick laminate

on both the side. Top to be rest on 50 mm Ø all

visible part of S.S, with brush finish buffing process,

totally rust and moisture proof. Applying wooden

bidding on all exposed area and shall be finished

with monocoat polishing. The quoting price should be

inclusive of all types of taxes & duties ,packing, Rupees Twelve

forwarding, loading, unloading, installation. And as Thousand Eighty Seven

per the drawing/ image & the chioce of user and as And Paise Sixty Eight

directed by engineer in charge. 12087.68 Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

44 16.00 SS DINING CHAIR

Providing & Supplying SS Dining Chair, As Per

Standard Size, The entire structure should be made

with (S.S 304 Grade Tube i.e 25 MM Ø & 1.2 MM

Wall Thickness. With S.S brush finish buffing

process, totally rust and moisture proof, with cushion

seat & back. The quoting price should be inclusive of

all types of taxes & duties ,packing, forwarding,

loading, unloading, installation. And as per the

drawing/ image & the chioce of user and as directed

by engineer in charge.

Rupees Four Thousand

Five Hundred Nineteen

And Paise Seventy Five

4519.75 Only Nos

45 8.00 WOODEN CHAIR

Providing & Supplying Teak wood Wooden Chairs

With Arm rest. The entire structure of the chair must

be made out of Special Seasoned Indian Teakwood.

Having Size of 470 (W) X 500 (D) X 900 (H) mm.

With structure of seat and back rest with smooth &

curved edges with, seat/back, cushioning of

density PU foam in seat & back with requisite no. of

coats of melamine sprey polishing, plastic buffers &

genuine leather, The quoting price should be inclusive

of all types of taxes & duties ,packing, forwarding,

loading, unloading, installation. Supplied strictly as Rupees Nine Thousand

per our technical specifications and make. As per One Hundred Twenty

choice of users department and Concern officers in Eight And Paise Thirty

charge as directed by the engineer incharge. 9128.38 Eight Only Nos

46 7.47 Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of Rupees Five Hundred

unserviceable materials with all lead and lift.(ii) In Eighty Nine And Paise

Cement Mortar. 589.70 Seventy Only Cu.mt

47 100.00 Pro. And fixing single layer water proof gypsum board

12.5 mm thick sections using water proof board of

size 1220 mm x 1830 mm x 8.0 mm suspended by GI

suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x

mm at 1220 mm center to center ceiling section of

size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and

perimeter channel A of size 20 mm x 27 mm x 30 mm

x 0.5 mm at edges & drops incl.paper tap sand sofit

cleat, anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling Rupees Six Hundred Six

incl.making necy.opening for light fitting,diffuser etc. And Paise Ninety Five

comp. as per detail drawing as directer 606.95 Only Sq.mt

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

48 634.75 silicate false ceiling tiles having Tegular edge &

mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC

or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of

hot dipped galvanized steel sections (galvanizing

@120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get

required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along Rupees One Thousand

spaced between main ‘T’ at 600mm centre to centre Six Hundred Seventy

to form agrid of 1200X600mm and secondary cross Four And Paise Fifteen

’T’ of length 600mm and size 24x28mm made of 0.30 1674.15 Only Sq.mt

49 3297.40 Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered Rupees Eighty Eight And

smooth. 88.39 Paise Thirty Nine Only Sq.mt

50 16.00 NOTICE BOARD

Providing & Supplying Notice Board - Soft Board with

decorative alluminium border with 2-way hanging

options having size of 1600 (L) X 1200 (W) with all

necessary fixtures, pins & accessories etc. The

quoting price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading, unloading,

Rupees Seven Thousand

installaion. (Make :- Title Display / Scholar) As per

Seven Hundred Twenty

choice of users department and Concern officers in

One And Paise Forty

charge as directed by the Architect/Engineer.

7721.45 Five Only Nos

51 16.00 NOTICE BOARD WITH GLASS DOOR

Providing & Supplying Notice Board with Glass door

for display purpose with locking mechanism, having

size of 1600 (L) X 1200 (W) X 100 (D) mm, made up

of powder coated steel structure with glass in door

with locking facility, etc. The quoting price should be

inclusive of all types of taxes & duties ,packing,

forwarding, loading, unloading, installaion. (Make :-

Rupees Eight Thousand

Title Display / Scholar) As per choice of users

Six Hundred Sixty Five

department and Concern officers in charge as

8665.80 And Paise Eighty Only Nos

directed by the Architect/Engineer.

52 12.00 STORAGE RACK (SLOTTED)

Providing & Supplying Files Storage Racks made out

by M.S. slotted angle of 40 x 40mm (2.5Kg/pcs.)

having size of 2000 X 1200 X 400 mm Depth , with

M.S. sheet (3Kg/pcs.) for partitions/shelves -

shelves , including Labour, material etc. The quoting

price should be inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading, installaion.

Rupees Three Thousand

As per choice of users department and Concern

Nine Hundred Ninety

officers in charge as directed by the

3999.60 Nine And Paise Sixty Only Nos

Architect/Engineer.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

53 42.00 ARTIFICIAL GRASS :- Providing & Supplying U.V

Stabilized eco-friendly natural green artifical lawn with

safe and resilient surface. Premium high density

grass with 25 MM grass height with PVC base. All

material shall accord with environmental protection

requirement. The quoting price should be inclusive of

all types of taxes & duties ,packing, forwarding,

Rupees Seven Hundred

loading, unloading, installaion. And as per the

Five And Paise Ninety

drawing/ image & the chioce of user and as directed

705.99 Nine Only Sq.mt

by architect engineer in charge.

54 50.00 GARBAGE BIN

Providing and supplying Approved Make Non

Magnetic Garbage Bin thickness not less than

mm made with SS 304 Grade sheet which has very

good material strength, and it is also Sturdy and Light

weight, with volumemetric capacity Ranging from 5 to

8 Kg, with/without paddle as per choice of user

department. Easy to clean, corrosion free and also

matt finished buffing process. The quoting price

should be inclusive of all types of taxes &

duties,packing, forwarding, loading, unloading, Rupees One Thousand

installaion. Supplied strictly as per our technical Six Hundred Twenty Two

specifications and make. (Godrej) As per the direction 1622.06 And Paise Six Only Nos

S.S Architect/ Engineer In charge.

Providing & Fixing S. S. Plate Signages having size

of 14 In. X 5 In. X 1.2 mm thick name plates with matt

finish buffing process of 304 grade mentioning

officers names/designations etc. The quoting price

should be inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading, installaion.

As per choice of users department and Concern

Rupees Seventeen And

officers in charge as directed by the

17.17 Paise Seventeen Only Sq.in

Architect/Engineer.

56 36.00 WALLPAPER

Providing & applying of decorative canvas base PVC

wall paper ( plain textured) fixed with anti bacterial

adhesive bartoline of green or equivalent), The

quoting price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading, unloading, Rupees One Thousand

installaion. As per choice of users department and One Hundred Twenty

Concern officers in charge as directed by the Four And Paise Thirteen

engineer in charge. 1124.13 Only Sq.mt

57 15.00 PICTURE FRAME

Providing and Supplying Photo concept with unique

design, shape & decorative wooden frame with

polishing having size of 950 x 650 and posters are

historical and decorative artwork on the canvas

materials. The photo shall be supplied as per the

Rupees Two Thousand

choice of the user department. The quoting price

Nine Hundred Sixty Six

should be inclusive of all types of taxes & duties

And Paise Thirty Seven

,packing, forwarding, loading, unloading, installaion.

2966.37 Only Nos

As directed by the engineer in charge.

58 15.00 HYDRAULIC DOOR CLOSER

Providing & Fixing Heavy Duty hydraulic Door closer

surface mounted type (grade 3) of standard make

made of cast aluminium body, 105'degree openable

fixed to the door with all necessary fixtures &

fasteners etc. The quoting price should be inclusive of

Rupees One Thousand

all types of taxes & duties ,packing, forwarding,

Three Hundred Thirty

loading, unloading, installation. As per choice of users

Three And Paise Twenty

department and Concern officers in charge as

1333.20 Only Nos

directed by the engineer In charge.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

59 15.00 FLOWER POT

Providing and supplying Ceramic, FRP, PVC, S.S

Flower Pot having size 450 mm Ø & 300 mm (H). The

cost shall include artifical flowers, decorative gravels

etc. The quoting price should be inclusive of all types

of taxes & duties ,packing, forwarding, loading,

unloading, installaion. As per choice of users Rupees Two Thousand

department and concern officers in charge as One Hundred Sixty Six

directed by the engineer in charge. 2166.45 And Paise Forty Five Only Nos

60 15.00 Providing & Supplying having size 30 x 30 cm Wall Rupees Five Hundred

clock as directed by engineer incharge. Fifty Five And Paise Fifty

555.50 Only Nos

61 15.00 Providing & Supplying Digital Red LED rectangle wall Rupees Two Thousand

clock having size 39.60 x 29.60 x 3.50 cms as Thirteen And Paise

directed by engineer incharge. 2013.94 Ninety Four Only Nos

62 127.90 Providing and fixing acoustical wall paneling with

using rock wool of 48 kg density and 50 mm thick and

then fixing ecotone SONIDO acoustic board of size

1200 x 600 x 15mm fix on alluminium frame and then

fixing 6MM thick ply wood of size 50MM than fixing

vinyl grippers of ecotone make EG 15 Griper

,Tracks ( Perimeter Track , Half wrap, mid seam

whatever is required) . Vinyl grippers must have base

tapes for better grip. Fixed in between Vinyl

grippers and sonido board pasting ecotone synco

PF of 10X10mm thick on the acoustical panel by

using adhesive as per specifications of

manufacturer. Fabric Stretching Supplying and

laying fabric stretch Clara Fabric shade vide

catalogue Name Brass/Atom is then cut into

required size and shape and stretched, inserted

inside the gripper by using tools recommended

by manufacturer, by Architect and as specified Rupees Four Thousand

including all accessories, material & labour complete Six Hundred Thirty Six

as directed by Architect / Engineer – in – charge And Paise Ninety One

4636.91 Only Sq.mt

63 24.37 Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished Rupees One Hundred

even and smooth in (ii) Cement mortar 1:4 (1-cement Sixty Eight And Paise

:4-sand) 168.87 Eighty Seven Only Sq.mt

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including Rupees One Thousand

dismentaling of existing flooring and jointed with color Five Hundred Forty Six

cement slurry including finised with flush pointing & And Paise Eighty Five

cleaning the surface etc. complete for light shade 1546.85 Only Sq.mt

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

65 146.23 WOODEN FLOORING (DOMESTIC)

Providing and laying 8 mm thick LAMINATE

WOODEN FLOORING OF PERGO ORIGINAL (matt

finish) consisting of panels of size 1194 mm x

mm having class use - 23/33, wear resistance level of

AC05 as per with a high pressure laminate surface

treated with aluminium oxide and specially patented

SURFACE GUARD + on top of high density fiber

board with a density of 910 kg/cum. The panels

having a click system tongue and groove joint to

secure a long lasting joint with the edges duly

impregnated with paraffin. The floating laminate

flooring shall be laid over a 0.20 mm thcik polythene

film to form a vapour barrier and 2 mm to 3 mm thick

PERGO FOAM under layer to reduce impact sound

etc. The quoting price should be inclusive of all types

of taxes & duties ,packing, forwarding, loading, Rupees One Thousand

unloading, installaion. Supplied strictly as per our One Hundred Ninety Six

technical specifications and make. As per the And Paise Eighty Five

direction of the Architect / Engineer In charge. 1196.85 Only Sq.mt

66 25.51 ALUMINIUM PARTITION

Providing and fixing aluminum partitions partly glaze

and partly fixed with extruded built up standard

tubular sections/ appropriate section size :-

MM x38.10 MM wall thickness 1.95MM (of jindal

section code - 20073 and other sections of approved

make conforming to IS: 733 and IS: 1285, fixing with

dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminum sections shall be

smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle,

Aluminum snap beading for glazing / paneling and

dash fasteners to be paid for separately) : 1.95 mm

thick aluminum section with followings:

• Color Anodised aluminum (anodised transparent or

dyed to required shade according to IS:

Minimum anodic coating of grade AC 15)

• Providing and fixing 12 mm thick prelaminated

particle board, extrior grade. flat pressed three layer Rupees Three Thousand

or graded wood particle board conforming to IS: Six Hundred Eight And

12823 Grade l Type ll, in panelling fixed in aluminum 3608.73 Paise Seventy Three Only Sq.mt

67 16.80 Providing and fixing anodised aluminium section door

having top and bottom rail of 110 mm x 45 mm and

middle & verticle rail members of 80 mm x 45 mm.

Door shutter shall be with partly 5mm thick tranporant

glasss & partly 12mm thick Bhuttan board with all

necessary fixtures and fasteners incl. glazing clip Rupees Five Thousand

rubber gasket etc with all labour charges as per Sixty Three And Paise

directed by engineer in charge. 5063.86 Eighty Six Only Sq.mt

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

68 72.38 STORAGE WITH LAMINATE FINISH

Providing,fixing, installation at site. Side and back

storage unit 450 deep made out of 18mm thick

plywood IS 710 grade and back of the side unit is of

8mm ply puthi unit is provided with vertical and

horizontal devisions as per design with drawers and

shutters, lockable with all handware like auto hinges,

tower bolt, magnetics catcher, handle and lock of

approved quality. The cabinet should be raised

75/100mm above floor. Inside 1 MM thickness

balancing laminate. Exposed outside surface finished

with 1MM thickness standard grade laminate of

approved design and make. All exposed edges

finished with first quality Teakwood beadings to be

finished in hard high gloss PU coating. The quoting

price should be inclusive of all types of taxes &

duties, packing, forwarding, loading, unloading, Rupees Twelve

installaion. As per detail drawing & choice of users Thousand Nine Hundred

department and Concern officers in charge as Thirty And Paise Two

directed by the Architect / Engineer. 12930.02 Only Sq.mt

69 49.00 Replacing Old & U/S By Point wiring for Light / Bell

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

Rupees Four Hundred

modules erected on / in wall / ceiling as per pipe

Eighty Five And Paise

erected, with necessary Lamp holder/ceiling rose /

485.81 Eighty One Only Pts.

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat-III

70 30.00 Replacing Old & U/S By Point wiring for FAN with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC

/ Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector

as directed. Rupees Six Hundred

(f) with medium class Rigid PVC pipe and Seventy Four And Paise

accessories erected concealed in wall/ceiling 674.68 Sixty Eight Only Pts.

71 1.00 Replacing Cat.

complete Old III

& U/S By Point wiring for on board

Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / Rupees Two Hundred

metallic/white front plate modules erected on / in Fifty Seven And Paise

wall / ceiling with following type accessories Cat-III 257.55 Fifty Five Only Pts.

72 Replacing Old & U/S By Providing following type of

Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered

with textured / metallic front plate , modules erected

with necessary connection. As desired by Engineer In

19.00 (1) One No. SP 6 Amp.Cat.III Rupees One Hundred

Fifty One And Paise Fifty

151.50 Only Nos

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

50.00 (2) One No 5 pin plug Cat.III Rupees One Hundred

Fifty One And Paise Fifty

151.50 Only Nos

30.00 (3) Two Pin/RJ-11 Telephone Socket [A] For One Rupees One Hundred

Gang Cat.III Sixty And Paise Fifty

160.59 Nine Only Nos

69.00 (8) Computer RJ-45 socket Cat.III Rupees One Hundred

Sixty And Paise Fifty

160.59 Nine Only Nos

25.00 (7) Blank Plate Single Cat.III

Rupees Twenty Five And

25.25 Paise Twenty Five Only Nos

33.00 (9) 16 Amp. SP one way switch Cat. III Rupees One Hundred

Eighty And Paise

180.79 Seventy Nine Only Nos.

33.00 (10) 6/16Amp. Universal socket Cat. III Rupees One Hundred

Ninety Nine And Paise

199.98 Ninety Eight Only Nos.

73 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed

Rupees Twenty Four And

24.24 Paise Twenty Four Only Mtr.

Rupees Thirty Three And

33.33 Paise Thirty Three Only Mtr.

74 755.00 Replacing Old & U/S By Providing and erecting

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories

Rupees Eighty Two And

(b) 2 wire 2.5 sq. mm

82.82 Paise Eighty Two Only Mtr.

75 providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories

240.00 (a) 2 wire 4 sq. mm Rupees One Hundred

Twelve And Paise Eleven

112.11 Only Mtr

110.00 (b) 2 wire 6 sq. mm Rupees One Hundred

Forty Seven And Paise

147.46 Forty Six Only Mtr.

30.00 (h) 4 wire 6 sq. mm Rupees Two Hundred

Sixty And Paise Fifty

260.58 Eight Only Mtr.

76 94.00 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed Rupees Forty Six And

46.46 Paise Forty Six Only Mtr.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

77 69.00 Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections as

Rupees One Thousand

1 no. 6A/16A universal plug-switch combined.

One Hundred Thirty

3 nos. 6A Switch

Three And Paise Twenty

3 nos. 6A 5 pin Plug For Modular Type

1133.22 Two Only Nos.

Accessories Cat-III Rupees Seventy One

78 12.00 Decorative call bell Ting-tong box type 250 volts

complete erected And Paise Seventy One

79 80.00 Replacing Old & U/S By Supplying and erecting LED

indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges Rupees Three Hundred

shown.) Seventy Three And Paise

(A) Tube Light with integral driver 373.70 Seventy Only Nos.

Replacing Old & Surge

U/S By- 2KV,IP-20, 4 feet

Supplying and Cat-IIILED

indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.) Rupees One Thousand

(B) LED Panel Light with provision for Plane front Seven Hundred Ninety

frame with translucent cover fixed to housing Four And Paise Seventy

complete.IP20 1794.77 Seven Only Nos

81 1.00 providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply

50 c/s. with all internal connections & complete Rupees Six Thousand

erected in existing 16 G.M.S. housing. ICS=100% of Seven Hundred Ninety

ICU only Cat III (with enclosure for MCCB) And Paise Forty Three

6790.43 Only Nos.

82 62.00 providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be Rupees One Hundred

erected in existing box. confirming to IS 8828/1996 Twelve And Paise Eleven

with ISI Mark Cat-III 112.11 Only Nos.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

83 2.00 Providing & erecting 240 V MCB double pole switch

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity Rupees Three Hundred

(B) 40 Amp. Cat.III Thirty And Paise Twenty

330.27 Seven Only Nos.

84 1.00 Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity Rupees Six Hundred

(b)40 Amp. Cat-III Sixty Eight And Paise

668.62 Sixty Two Only Nos.

85 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

2.00 (iv)12 way Rupees One Thousand

Four Hundred Ninety

Two And Paise Seventy

1492.78 Eight Only Ea.

1.00 (B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) Rupees Three Thousand

(b) sheet steel double door (IP-43) Four Hundred Twelve

(iii)8 way And Paise Seventy Nine

3412.79 Only Nos.

86 5.00 providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component. for following Rupees Two Thousand

Max. rating erected as directed Two Hundred Thirty Five

(ii) 40Amps. DP Cat-III 2235.13 And Paise Thirteen Only Nos

87 30.00 Replacing Old & U/S By Providing & erecting

Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser

volt A.C. 50 Hz 1200 mm sweep complete having

3blades with aluminium blades with , canopy & 30 Rupees One Thousand

cm. down rod erected with earthing.(Make shall be Nine Hundred Forty Eight

approved by Engineer in charge)) And Paise Twenty Nine

1948.29 Only Nos

88 94.00 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly Rupees One Hundred

painted for fan complete with proper insulation without Eight And Paise Seven

leakage and earthing. 108.07 Only Mtr.

89 3.00 Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium Rupees Two Thousand

duty having following dia size and maximum speed in Fifty Four And Paise

RPM [A] 305 mm dia 900 RPM Cat.II 2054.34 Thirty Four Only Nos

90 22.00 Removing the installed Ceiling fan / Exhaust Fan for

servicing / repairing from ceiling and reinstalling the

same after making in working condition. Rupees Forty Three And

43.43 Paise Forty Three Only Ea.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

91 6.00 Providing & erecting, programming, testing of

chairman unit microphone with flexible stem of

mm in length and light ring built in loud speaker ,two

head phone socket ,attractive design ,priority button

for chairman microphone,built in volume control for

head phones,chime tone facility to precede chairman

priority calls,microphone on/off button,red indicates

for microphone is active,frequency response -400Hz

Rupees Five Thousand

to 10kHz,nominal acoustic input -85 dB SPL

Nine Hundred Ninety

[[Approved by Competent Authority i.e. not Below the

Two And Paise Thirty

rank of Executive Engineer ]

5992.33 Three Only Ea.

92 24.00 Providing & erecting, programming, testing of

Delegate unit microphone with flexible stem of

mm in length and light ring built in loud speaker ,two

head phone socket ,attractive design ,built in volume

control for head phones,chime tone facility to precede

chairman priority calls,microphone on/off button,red

indicates for microphone is active,frequency response

-400Hz to 10kHz,nominal acoustic input -85 dB SPL

Rupees Five Thousand

[[Approved by Competent Authority i.e. not Below the

Five Hundred Sixty Five

rank of Executive Engineer ]

5565.10 And Paise Ten Only Ea.

93 6.00 Supplying & erecting dual channel amplifier ,power

handling capacity of 180 watt ,four micro phone

inputs with independent level control ,built in FM

tuner,with preset memories,USB drive & SD card for

MP3 playback ,100v /telephone input with priority and

VOX,frequency response-80 Hz to 18k Hz Philips /

/distortion less than 1% @ rated power up to 50 units

Thousand One Hundred

[[Approved by Competent Authority i.e. not Below the

Twenty Eight And Paise

rank of Executive Engineer ]

11128.18 Eighteen Only Ea.

94 36.00 Supplying and erecting ceiling speaker with rated

power of 30 watt/power tapping 30/15/7.5 watt

available,opening angle 180 degree H * 77 degree V

,sound pressure level 88 dB ,frequency response of Rupees Two Thousand

70Hz to 20KHz [[Approved by Competent Authority Five Hundred Sixty Nine

i.e. not Below the rank of Executive Engineer ] And Paise Forty Four

2569.44 Only Ea.

95 2.00 Supplying, Installing & testing approved make highly

sensitive microphone capable to pick up weak sound

from longer distance & wider area suitable for stage

shows, group singing with frequency response 50 -

16000 Hz. Having sensitivity of 1.6MV / Pa &

impedance 250 ohms (Lo -Z), Supplied with

quick detachable holder & 10 mtr. twin core cable &

Rupees Two Thousand

pin XLR connector. [[Approved by Competent

Seven Hundred Forty

Authority i.e. not Below the rank of Executive

2740.13 And Paise Thirteen Only Ea.

96 2.00 Supplying , installing & testing approved make

Microphone for Speech, Music, & Close to lip singing

with inbuilt protection against breath & wind noise

with capability to capture sound from long distance &

wide area with frequency response 50 - 16000 Hz,

having sensitivity 1.8mv / Pa & impedance

ohms(Lo -Z) supplied with quick detachable holder,

Rupees Two Thousand

Mtr long. Twin core cable & 3 pin XLR connector.

Six Hundred Fifty Four

[[Approved by Competent Authority i.e. not Below the

And Paise Twenty Eight

rank of Executive Engineer ]

2654.28 Only Ea.

97 Supplying microphones stands with sturdy

mechanism, treble free movement & positioning of

microphones, free from rust with superior quality of

chrome plating with following size. [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ]

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

1.00 (a) Fixed height of 13 Cm.with base dia.12 CMS Rupees One Hundred

Twenty And Paise

120.19 Nineteen Only Ea

1.00 (b) Fixed height 35 cm & extendable up to 53 cm, Rupees Two Hundred

with round base of dia. 16 cms. Fifty Seven And Paise

257.55 Fifty Five Only Ea

2.00 (c)Fixed height 91 cms. & extendable up to 62 cms. Rupees Four Hundred

with round base of dia. 23 cms. Forty Five And Paise

445.41 Forty One Only Ea

98 4.00 SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode”

management user interface

193 W PoE budget

Rupees Thirty One

Thousand Nine Hundred

[Approved by Competent

Ninety Six And Paise

Authority i.e. not Below the rank of Executive

31996.80 Eighty Only Ea.

99 11.00 Providing and erecting approved make Cassette type

split air-conditioning unit consisting of condensing unit

with fan motor, hermetically sealed scroll/rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor

with its accessories by Eco friendly Green gas

Rupees Sixty Thousand

charging & Internal copper wiring & Remote control (

Eight Hundred Forty

3 star and above of current year) with necessary core

Seven And Paise Forty

60847.45 Five Only Ea.

(C) for 2 ton capacity

100 33.00 Supplying and erecting insulated pair of soft copper

tubing open or concealed including power and control Rupees Nine Hundred

cable,necessary PVC drain pipes for Split AC Sixty Five And Paise Fifty

machine up to 4 TR capacity 965.56 Six Only Rmt.

101 2.00 SITC of Power amplifier, 240W

[Approved by Rupees Nineteen

Competent Authority i.e. not Below the rank of Thousand Twenty Nine

Executive Engineer ] 19029.41 And Paise Forty One Only Ea.

102 7.00 Supplying and erecting approved make online Un-

interruptible Power Supply system comprising flat

cum-boost charger with IGBT base rectifier & Inverter

& sealed maintenance free SMF batteries. The

charger having operating capacity for input 160-270V

AC & inverter having output 230V,50 Hz Ac with

load power factor with battery, over/under voltage

output with over load & short circuit protection

equipment. The system housed in CRC sheet duly

Rupees Forty Seven

powder coated paint with following power backup.with

Thousand Eight Hundred

MS painted batteries stand, 10% Overload capacity

Ninety Nine And Paise

for momentary load.

47899.25 Twenty Five Only Ea

(B) 2KVA with 1Hr Backup

103 2.00 SITC of 3LCD Lamp based projector having wxga

(1280x800) or better resolution with minimum white

brightness of 3800 lumens and color brightness of

3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1

or more. the projector should have auto vertical key

stone correction of +/- 30 degree and Manual

Horizontal of +/-30 degree. the projector should have

optical lens, throw ratio 1.30-1.56:1. Zoom Factor of

1.2. Lens focus Manual having focal length 16.9mm

to 20.28mm. projector should have features like AV

mute slide, quick corner and split function and should Rupees Thirty Three

support wireless functionality with inbuilt wifi or wifi Thousand Eight Hundred

dongle. [Approved by Competent Authority i.e. not Ninety Five And Paise

Below the rank of Executive Engineer ] 33895.60 Sixty Only Ea.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

104 2.00 SITC of universal Projector mounting kit, with

necessary grouting, fasteners etc. with adjustable Rupees Six Thousand

height and suitable for all types of projectors. Eight Hundred Forty

[Approved by Competent Authority i.e. not Below the Eight And Paise Eighty

rank of Executive Engineer ] 6848.81 One Only Ea.

105 2.00 SITC of 120 inch Self Lock MW (8 x 6) Instalock Slow

Retraction Screen, Aspect Ratio-4:3 Rupees Five Thousand

[Approved by Three Hundred Thirty

Competent Authority i.e. not Below the rank of Four And Paise Eighty

Executive Engineer ] 5334.82 Two Only Ea.

106 Supplying & erecting Mixing Console having

channels, Audio mixer with. Echo facility for live

performance, Auditorium & stadiums, having following

features & facilities. [[Approved by Competent

Authority i.e. not Below the rank of Executive

(a)input Channels :- Each channel has separate

6.25mm size balanced phone jack for mike & line

for balanced & unbalanced signals.

(b)Individual gain control for sating optimum level

for minimum noise.

(c)BASS, MID & TREBLE ‘ controls Separately for

each input channel.

(d)ECHO control for each channel

(e)PAN control for echo channel for left or right output

(f) AUX Control : To control , level of the channel in

final mix to AUX sound output

(g)Channel ON/OFF switch

(h)ECHO Section :- ECHO, reverb & Chorus effect

can be added to all input channel by different setting

of Delay, Reverb & Level control.

(i)Tape section

(j)Aux. send & return For sending Pre-feeder output of

channel for monitoring or adding a special effect unit.

(k)Mono / Stereo output controls

(L)Master faders to control over left & right output

(m) Head phone output for monitoring purpose.

Technical specification

(a)Power Requirement -AC220-24OV 50 Hz DC

(b)MIC Output Impedance/gain -2 K Ohms/

(c)Line Output Balance/42 dB —- 20 K ohms

(d) Impedance / Gain :- 10Kohms unbalance /

(e)frequency Response - 30 Hz- 20 KHz L / R Line

Output ( + 0, -1 dB )

(f)Equalization Bass/ - + / - 12 dB at 100Hz Mid /

Treble 2 KHz / 10 KHz

(g) Outputs, Line Output Line Output Low : -10

dB / -2 dBM Line Output High : 0 dBM / +17

(h) S/N ratio Line Output Level : > 70 dB (0 dB,

The Console shall be mounted on standard Rack,

The channel of following numbers.

2.00 (B) 9 Channel Audio Mixer with ECHO Rupees Twelve

Thousand Four Hundred

Eleven And Paise Eighty

12411.89 Nine Only Ea.

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

107 10.00 Supplying &, Erecting speaker system comprising

50W handling capacity with frequency response of

-200,00Hz & 16 Ohms impedance with high efficiency

2Nos. of 8 inch full range speakers housed in Rupees One Thousand

acoustically suspended enclosure. [[Approved by Nine Hundred Fifty Two

Competent Authority i.e. not Below the rank of And Paise Thirty Three

Executive Engineer ] 1952.33 Only Ea.

108 2.00 Supplying & testing wireless microphone system for

92.5 MHz FM operation With effective range 200 feet

with microphone having facility for frequency

adjustment & receiver with LED indicator Telescopic Rupees One Thousand

antenna with battery cells.[[Approved by Competent Eight Hundred Eighty

Authority i.e. not Below the rank of Executive Four And Paise Sixty Six

Engineer ] 1884.66 Only Ea.

109 1.00 SITC of Gooseneck microphone

Unidirectional condenser microphone

Phantom powered by amplifier

On/off sliding switch with priority contact

Supplied with fixed 2 m (78 in) cable and lockable

DIN connector Rupees Twelve

[Approved by Competent Authority i.e. Thousand Forty Six And

not Below the rank of Executive Engineer ] 12046.27 Paise Twenty Seven Only Ea.

110 1960.00 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] Rupees Forty Seven And

CAT - 6 47.47 Paise Forty Seven Only Mtr

111 2.00 Plastic enclosure fitted with DIN rail suitable for Rupees Fifty Two And

incorporating One / Two nos. MCB 52.52 Paise Fifty Two Only Nos

112 5.00 Providing erecting and testing of sony bravia 139 cm

(55 inches) 4 K Ultra HD smart LED Google TV KD-

55x75L with following specificatons:- (1) Product

Dimensions 8.4 x 124.3 x 72.9 cm;13.9 kg (2)

Operating system - Google Tv (3) Hardware Interface

- Bluetooth,USB,Ethernet,HDMI, Composite Video (4)

Graphics Coprocessor : X1 4K Processor (5)

Resolution : 4K (6) Compatible Devices : Android

Phone, Home Theatre (7) Special Features : Google

TV, Watchlist , Voice Search, Google Play,

Chromecast,Netflix, Amazon Prime Video, Additional

Features : Apple Airplay, Apple Homekit, Alexa (8)

Mounting Hardware :1 LED TV, 1 AC Power Cord,

Remote Control, 1 Table - Top Stand, 1 User Manual,

2 AAA Batteries (9) Remote Control Technology : IR,

Bluetooth (10) Display type : 4K HDR (11) Image

Aspect Ratio : 16:09 (12) ScreenResolution3840 x

2160 Pixel (13) Supported Audio formats :

mp3_Audio, wma (14) Speaker surround sound

channel configuration : Dolby Audio (15) Audio Rupees Fifty Two

Wattage : 20 Watts (16) Voltage : 240 Volts (17) Thousand Nine Hundred

Wattage : 142 Watts (18) Refresh Rate : 60 Hz (19) Thirty Nine And Paise

Total USB ports 2 Connector Type Wi- 52939.15 Fifteen Only Ea

113 1.00 Supply,Installation,Testing & Commissioning Of 27U

(600W x 600D) MM Floor rack with PDU, Horizontal

Cable Manager , Sel,Mounting hardware and cooling

fan with standard accessories, UL Cerfied,Racks

should be manufactured by ISO9001:2015,

ISO14001:2004 & OHSAS 18001:2007,DIN41494 Rupees Thirty Four

and Equivalent EIA/ISO/EN/CEA Certified Company Thousand Eight Hundred

and should have proper EHS Policy. Twenty One And Paise

34821.77 Seventy Seven Only Ea

I / We am / are willing to carry out the work at……………….% Above / below percent (should be written in figure

and words) of the estimated rates mentioned above Amount of my / our tender works out as under.

Estimated Amount Estimated Amount

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan

Quantities Tendered Rates

It Total amount

It Total amount

estimated Rs. In In Words

No. but may Figures. according to

Item of Work Unit estimated

or less quantities

Put to Tender Rs. …………………. Put to Tender Rs. …………………

Deduct ……% Below Rs. …………………. Add…………% Above Rs. …………………

Net Rs. …………………. Total Rs. …………………

Signature of Contractor

Dy. Executive Engineer

Executive Engineer

R&B Sub Division

F:\Tender 2026-27\NIVIDA-3\DTP District Court Building Patan Dt 14-04-2026\DTP District Court Building Patan