CWEK-75/2020-21

Amount

Dismantling timber scantlings 40 sq. cm and over in section, in any position (Unframed work) complete all as specified.

Demolition of concrete (un-reinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for PCC 1:4:8 Type B-2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed.

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and and directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, work in rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and and directed.

M & L for reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for TMT bars of 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F for 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zink coating 275 complete all as specified and directed.

All as per Srl Item No 12 here-in-before above but expect sheet.

S & F for plain, galvanised, 0.80mm thick, class-2, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings length and girth as fixed with grade of zinc coating fixed with new J-hooks/L-hooks/cranked hook bolts etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets (Demolition) complete all as specified and directed.

Dismantling timber scantlings in fillets, rails posts, rafters purlins etc under 40 sqcm in sction (unframed work) complete all as specified and directed.

M & L for 2nd class soft-wood, timber scantling fixed and clean sawn, in scantlings complete all as specified and directed.

All as per Srl Item No 17 here-in-before above but expect timber.

M & L for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using 2nd class soft-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm complete all as specified and directed.

M & L for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class soft-wood clean sawn in sectional area exc 3 sq.cm and not exc 6 sq.cm complete all as specified and directed.

M & L for 6mm thick (5 ply) plywood, grade BWR, type BB, fixed with nails to timber frame work as in wall etc, complete all as specified and as directed by the Engineer-in-Charge

M & L for 6mm thick (5 ply) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceilings etc, complete all as specified and as directed by the Engineer-in-Charge

M & L for 6mm thick (5 ply) veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work in ceiling, complete all as specified and directed.

M & L for 6mm thick (5 ply) veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on walls, complete all as specified and directed.

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 8 to 10mm thick (square/rectangular) area of each tiles exceeding 0.36sqm but not exceeding 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed.

M & L for Glazed Ceramic coloured tiles in vertical surface 450 x 300 x 7 to 8 mm thick set and joint in neat cement slury and pointed in white or colour cement mixed with pigments to match the surface on including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces to be finished even and fair (without using extra cement) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

S & F 2nd class factory made softwood, plain, 35mm thick framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with comercial face veneers; fitted to chowkats complete all as specified and directed.

S & F 30mm thick 2nd class softwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc for window ,ventilators sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats complete all as specified and directed.

S & F 35mm thick 2nd class softwood factory made glazed and skeleton for door shutters, open rebated and prepared to receive glass, gauze, etc . divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc for door .; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge

S & F 2nd class hardwood chowkats and frames plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing for butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing for ISI marked 300mm long aluminium alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy to door shutter complete all as specified and directed.

S & F 150mm long aluminium ISI marked, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 125mm long aluminium ISI marked, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 200mm long aluminium ISI marked, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150mm extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S & F 100mm extruded aluminium confirmed to IS alloy handles, fabricated type., anodised complete all as specified and directed.

S & F 125mm extruded aluminium alloy handles confirmed to IS, fabricated type., anodised complete all as specified and directed.

M & L for sheet glass 2.8 to 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed.

S & F Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe and anti-syphonage pipe etc. and making good to floors,fixed in repair complete all as specified and directed.

M & L for Vitreous China, corner wash hand basin, flat back white of size 550mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC 32mm dia waste pipe, chain and plug including cutting for and pinning in ends of brackets or erecting stand, fixed in repair, complete all as specified and directed.

S & F of 15mm size PVC connections with PTMT nuts of length 600mm fixed in repair complete all as specified and directed.

S & F of Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe fixed in repair complete all as specified and directed.

S & F of Angle valve,15mm bore fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repair complete all as specified and directed.

S & F of 20mm bore stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repair complete all as specified and as directed.

M & L for taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M & L for taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing for ISI marked 15mm bore, fancy type bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repiar complete all as specified and directed.

S & F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) fixed in repair complete all as specified and directed.

S & F for grating doom 100mm dia of PTMT (minimum weight 25gms) fixed in repair complete all as specified and directed.

S & F for PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle,32 mm dia PVC long bend flush pipe 90cm long, fixed in repair, complete all as specified and directed.

Dismantling wrought iron of mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410 or Fe 310, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, ISI Marked in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed, ISI Marked in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes double socketed, ISI Marked in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes double socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

M & L for Prepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified.

M & L for Prepration of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint on sheel sheeting as in roofing, complete all as specified.

M & L for Prepration of new painted wooden or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint,over one coat of pink primer complete all as specified and directed.

M & L for Prepration of old painted wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

S & F LLDPE septic tank with upflow filter including media designed to carry sewage and sullage water, excavation in any type of soil , PCC 1:4:8 below foundation, vent shaft , connection etc. complete for 50 users ISI marked Complete all as specified and approved by GE.

M & L for Soakage well exc in any type soil, foundation in PCC 1:3:6, wall of honey combed with top ring of M-30 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:6, RCC (M-30) cover, interconnecting pipes of RCC/DWC complete filled with bricks of size 1.2 m dia and 1.5m depth complete all as specified and shown on drawing No CESZ/TD-1078/2011 Sheet No 1/1 dated 1.12.11

M & L for 25mm thick 2nd class softwood boarding in floors and skirting, planed one side & edges tongued and grooved or rebated and fixed with nails complete all as specified and directed.

M & L for 500 Litres rotational moulded polyethylene (triple layer) water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I fixed in repair ISI marked complete all as specified and directed.

M & L for 50mm thick PCC 1:3:6,( nominal mix), type C-1, (using 20mm graded crushed stone aggregate) laid in alternative bays as in plinth protection, including finishing the surface even and fair and filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified and directed.

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and directed.

Demolition of concrete(reinforced) of any description and in any position not otherwise specifically provided for (Demolition Lime concrete) complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 100mm) complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 150mm) complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil,complete all as specified and directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and directed.

M & L for PCC 1:3:6 Type C-2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L for providing cement concrete 1:2:4 Type B-1 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth, string, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for providing precast RCC 1:2:4 type B1 using 20mm graded aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete with joints to match, except blocks or slabs complete all as specified and directed.

M & L for brickwork with subclass `B’ bricks, in straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L for brickwork with subclass `B’ bricks, in straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M & L for brickwork with sub-class `B`(old size bricks), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge

S & F for 15mm Bore 3 layers PP-R polypropylene random copolymer) pipes concealed pipes SDR 74 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc.complete all as specified and directed.

S & F for 20mm Bore 3 layers PP-R polypropylene random copolymer) pipes concealed pipes SDR 74 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc.complete all as specified and directed.

S & F for 25mm Bore 3 layers PP-R polypropylene random copolymer) pipes concealed pipes SDR 74 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc.complete all as specified and directed.

S & F for 32mm Bore 3 layers PP-R polypropylene random copolymer) pipes concealed pipes SDR 74 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc.complete all as specified and directed.

S & F for 25mm PP-R Gate Valves (brass insert) as per requirement of the site complete all as specified and as directed.

S & F for 32mm PP-R Gate Valves (brass insert) as per requirement of the site complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes double socketed, ISI Marked in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius, ISI Marked with access door complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius, ISI Marked with access door complete all as specified and directed.

S & F for 110mm bore PVC (SWR) junction double (double T) equal or unequal, ISI Marked with access door complete all as specified and directed.

S & F for 75mm bore PVC (SWR) junction double (double T) equal or unequal, ISI Marked with access door complete all as specified and directed.

S & F for PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified and directed.

S & F 110/110mm bore PVC (SWR) `P` trap, complete all as specified and directed.

S & F 110mm bore PVC (SWR) couplers, complete all as specified and directed.

S & F 75mm bore PVC (SWR) couplers, complete all as specified and directed.

M & L for concrete bed to drain pipes of 100mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed aggregate) complete all as specified and directed.

S&F for vitreous China wash down water closet pan (pedestal pattern), ISI Marked white (excluding fixing bolts flushing cistern and flush pipe) fixed in repair complete all as specified and as directed by the Engineer-in-Charge

S&F for plastic water closet seat cover, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S & F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified and directed.

M & L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified and as directed. (Stiles and panel of different colours to be used)

S & F 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 142gms) complete all as specified and directed.

M & L for 25mm thick cement concrete 1:2:4 type B-1, (20mm graded aggregate) using extra cement including finishing surface of concrete topping even and smooth complete all as specified and as directed by the Engineer-in-Charge

S & F stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge

S&F Viterous china wash and basin oval counter top ISI Marked white of size 560x410mm fixed in repair complete all as specified and directed.

S&F Wall mixer with telephonic shower for mixing hot & cold water, 15mm bore, fancy type, brass chromium plated, , screwed for iron pipe, complete all as specified and directed.

S &F Brass CP mixer for mixing hot & cold water for 15mm bore dia. pipes, screwed down for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F for tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and dfixed to walls, complete as specified and directed.

S & F for 32mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern, complete all as specified

M & L for PVC (SWR) gully trap 110mm, setting and jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge

S&F for soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long ,fixed in repair complete as specified and directed.

S &F Corner shelf with CP bracket fixed in repair complete all as specified and directed.

S & F for Hand Shower (Health Faucet) with 8mm dia, 1.5 metre long PVC tube and wall hook with plastic body, chromium plated , complete all as specified.

S & F for Chromium plated toilet paper holder complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed by the Engineer-in-Charge.

M & L for softwood 2nd class weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed by the Engineer-in-Charge

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by the Engineer-in-Charge

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge

M & L for taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by the Engineer-in-Charge

M & L for Point wiring in colour code with 1.5 Sqmm (7/0.53) single core multi-stranded copper conductor FRLS (multistrand) PVC insulated and un-sheathed heavy duty cable in and including PVC rigid concealed conduits 2.0mm wall thickness, ISI marked not less than 20mm dia with all fittings/accessories terminated into cast iron/pressed steel terminal boxes, joint boxes, other boxes made from 1.2mm thick MS sheet of suitable size for mounting switches, sockets, fan regulators, light fittings etc., on 3mm thick hylam brand IS-2036 laminated sheet top cover and also including PVC insulated 1.5 Sqmm copper stranded conductor as earth wire (green colour) connected to common earth dolly complete all as specified and directed.

M & L for All as per Srl item No. 130 here-in-before above but one light/fan/bell point controlled by one 6 Amps switch one way switch complete all as specified and directed.

M & L for All as per Srl item No. 130 here-in-before above but for 3 pin, 6 Amp socket outlet on independent board complete all as specified and directed.

M & L for All as per Srl item No. 130 here-in-before above but for one bell point controlled by one bell push button on the same board with other switches complete all as specified and directed.

M & L for All as per Srl item No. 130 here-in-before above but for 3 pin, 6 Amp socket outlet on same board with other switch complete all as specified and directed.

M & L for Point wiring in colour code with 2.5 Sqmm (7/0.67) single core stranded copper conductor FRLS (multistrand) PVC insulated and un sheathed heavy duty cable in and including PVC rigid concealed conduits 2.0mm wall thickness, ISI marked not less than 20mm dia with all fittings/accessories terminated into cast iron/pressed steel terminal boxes, joint boxes, other boxes made from 1.2mm thick MS sheet of suitable size for mounting switches, sockets, fan regulators, light fittings etc. on 3mm thick hylam brand IS-2036 laminated sheet top cover, and also including PVC insulated 2.5 Sqmm copper stranded conductor as earth wire (green colour) connected to common earth dolly for one Three pin socket outlet 16Amp Independent , complete all as specified and directed.

M & L for Point wiring in colour code with 4 Sqmm (7/0.67) single core stranded copper conductor FRLS (multistrand) PVC insulated and un sheathed heavy duty cable in and including PVC rigid concealed conduits 2.0mm wall thickness, ISI marked not less than 20mm dia with all fittings/accessories terminated into cast iron/pressed steel terminal boxes, joint boxes, other boxes made from 1.2mm thick MS sheet of suitable size for mounting switches, sockets, fan regulators, light fittings etc. on 3mm thick hylam brand IS-2036 laminated sheet top cover, and also including PVC insulated 2.5 Sqmm copper stranded conductor as earth wire (green colour) connected to common earth dolly for one Three pin socket outlet 16Amp Independent , complete all as specified and directed.

S & F for Switch piano, flush type, Single pole, One way, 6 Amp complete all as specified and directed.

S & F for Switch piano, flush type, Single pole, One way, 16 Amp fixed in repair complete all as specified and directed.

S & F for Modular Switch, one Way, 6A, 1 Module complete all as specified and directed.

S & F for Modular Push Bell, 6 A, 1 Module fixed as in repair complete all as specified and directed.

S & F for Modular Switch, 1 Way, 16A, 1 Module complete all as specified and directed.

S & F Modular Socket, 6A, 2/3 pin combined, 2 Module complete all as specified and directed.

S & F Modular Socket, 6A / 16A, 2/3 pin combined, 2 Module complete all as specified and directed.

S & F for Bell, electric,Ding Dong AC, 230 volts, single pole fixed in repair complete all as specified and directed.

S & F Socket outlet, 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.

S & F for Socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type , complete all as specified and directed.

S & F for ceiling rose, surface bakelite, 65x50mm, two to three terminals, complete all as specified and as directed by the Engineer-in-Charge

S & F for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed by the Engineer-in-Charge

S & F for Fan step regulator, 120 W, 2 Module fixed in repair completet as specified and directed.

M & L for taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and as directed. Note: The cost of requirment T & P,flat form ladder shall be included in the quoted rates.

Repair and re-fixing,re-assembling the existing cealing fan in same original position along with cable after rectrification of defects such as apply the one coat varnish for windings, painting fan blades,changing fan bearning of fan, write MES No on fan blades including nuts bolts and washers complete as specified and directed.

S & F Environmental friendly,ultra modern,energy saving,surface mounted,decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs Endura Rugby Neo N -IP65 completet as specified and directed.

S & F exhaust fan/brisk air fan of size 150 mm sweep,non matallic complete all as specified and directed.

S & F Bulkhead luminaire comprising of high brightness LEDs 10W LED,IP-65 complete all as specified and directed.

S & F New E-Lite LED Triyca batten A colour changing LED batten with options of 3000 K,400 K & 6500K,all in one fixture complete all as specified and directed.

S & F City 1 decorative wall light fixture made up of polycarbonate,suitable for 20 W retrofit CFL/LED lamp (Spiral B-22 BASE) complete all as specified and directed.

S & F Linnet LED mirror light 14 Watts,1' (Feet) made of extruded engineeing plastics suitable for surface mounting on a ceiling or wall complete all as specified and directed.

S & F LED 15W recess mounted compact vertical,round shaped downlighter with removable driver complete all as specified and directed.

S & F for pin LED lamp 10W with B-22,base complete all as specified.

S & F water storage heater type of capacity 25 Litre BEE 5 star, 230 volts completet as specified and directed.

S & F decorative ultra slim aluminium LED lighgting fixture 22 W with high lumen output,environmental friendly,energy efficient ready to use pack completet as specified and directed.

S & F MCCB 4 pole,415 volts ,fixed type 63 Amps with breaking capacity 16 KA,OPTIUM 1.0 (fixed with ternal magnetic range) completet as specified and directed.

S & F MCCB 4 pole,415 volts ,fixed type 160 Amps with breaking capacity 16 KA,OPTIUM 1.0 (fixed with ternal magnetic range) completet as specified and directed.

S & F street light panel complete with three phase incomer and 200 Amps rating aluminium bus bar Frame size 2'x2', incoming MCCB 160 Amp completet as specified and directed.

S & F OFF load change over switch 200 Amp capacity with rated Voltage 415-AC 50 Htz type FP completet as specified and directed.

S & F VTPN Vertical type distribution board (MCCB incomer) 4 ways module completet as specified and directed.

S & F for sheet meal enclosure, factory made for DBs, double door when MCB's to be used, single pole & neutral, 240 volts, 8 way, fixed as in repair complete all as specified and directed.

S & F for sheet meal enclosure, factory made for DBs, single door when MCB's to be used, single pole & neutral, 240 volts, 8 way, fixed as in repair complete all as specified and directed.

S & F for sheet meal enclosure, factory made for DBs, single door when MCB's to be used, single pole & neutral, 240 volts, 12 way, fixed as in repair complete all as specified and directed.

S & F for MCB, single pole, 6 to 32 Amp, AC, 240 Volt, B Curve complete all as specified.

S & F for MCB, double pole, 40 Amp, AC, 415 Volt, C Curve complete all as specified.

M & L for Sub main wiring with single core copper conductor cable multistrand (FR-PVC) insulated and unsheathed by using 2 single core, copper 6 Sqmm cable with one single continuous 6 Sqmm copper conductor cable PVC insulated and un sheathed (green colour) earth wire connected to common earth dolly in and including concealed PVC rigid conduit of 25mm dia, 2.0 mm wall thickness (ISI marked) with all fittings and fixing accessories, complete all as specified and as directed. Note :- Two runs of 6 sqmm and one one run of 6 sqmm cable as earth along with PVC casing will be measured as one lenght.

M & L for Sub main wiring with single core copper conductor cable multistrand (FR-PVC) insulated and unsheathed by using 2 single core, copper 10 Sqmm cable with one single continuous 10 Sqmm copper conductor cable PVC insulated and un sheathed (green colour) earth wire connected to common earth dolly in and including concealed PVC rigid conduit of 25mm dia, 2.0 mm wall thickness (ISI marked) with all fittings and fixing accessories, complete all as specified and as directed. Note :- Two runs of 10 sqmm and one one run of 10 sqmm cable as earth along with PVC casing will be measured as one lenght.

M & L for XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core ISI Marked laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

M & L for XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 2 core ISI Marked laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified.

Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed

Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the plate not less than 1.50 m below normal ground level, connected to galvanized earth wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel and including earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 (Using 20mm graded stone aggregates) pre-cast RCC cover in 1:2:4 type B1, 40mm thick reinforced with XPM not weighting not less than 1.87 Kg/Sqm with suitable handle, charcoal common salt, 20mm bore GI ‘medium grade’ watering pipe, funnel and 15mm bore ‘light grade’ protection pipe and testing on completion all as shown in electrical plate No 3 of SSR- 2009 Part-I, complete all as specified and directed.

Note : Srl item No 72 Soakage well drawing available with this office/GE's office, Bidder shall collect the drg during working hours before submission of tender.

M/S MAHIR MUNEER

M/S MATOO INFRASTRUCTURES PVT. LTD.

m/s mohd rafiq lone

M/S ALTAF HUSSAIN KHUROO