REPAIR MAINTENANCE OF JOINERY PLUMBING FITTINGS FLOORING ROOF AND B AND R SERVICES OF OTM AND MD ACCN AT RTC AND AREA ACCOUNT OFFICE SALT LAKE UNDER GE N KALKATA

Amount

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed. Make for bitumene:- STP / Tikitar / Choksy Chemicals.

Material and labour for Machine pressed precast conctete interlocking paver block any shape and size including over 100mm thick sand cusion over rammed earth confirming to IS 15658-2006 of 80 mm thickness, M-35, with grey cement and pigments complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floorscomplete all as specified and directed. Make:- for item Nos. 3 & 4:- . Ultra tile / Anjali tiles / Nitco / Mehatab / Terra firma / Ecco scope./ M/S Stylish Precast Pvt ltd.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified and directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. Make for item nos. 6 & 7:- Kajaria / Asian Granito / Somany / VamoraGranito / Nitco / Orient / Jhonson

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. Make for item Nos. 8 & 9:- Somany / AsianGranito / Nitco / Orient / Kajaria / varmoraGranito Pvt Ltd / Jhonson.

Material and labour for glazed ceramic colour tiles 300x450 x 7mm thick as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make:- Kajaria / Asian Granito / Somany / VamoraGranito / Nitco / Orient / Jhonson

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Supply and lay TMT bar 8 mm dia for reinforcement of half brick wall complete all as specified and as directed. (Note : Reinforcement shall be provided at every fourth course of half brick wall). Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

All as per item no. 18 above but other than fair faces of brickwork.

M&L for applying wall care putty and appling two coats of oil bound distempe, first quality,r over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.

Material and labour for preparation of new plastered suface and applying two coats of cement base paint, first quality, over a coat of alkali resistance primer complete all as specified and as directed. Make for item nos. 20 & 21:- Asian / Berger / Jenson & Nicholson / Shalimar.

Dismantling of RCC/angle iron posts or struts embedded in concrete any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises complete all as specified and as directed.

Supply and fix rolled mild steel Fe-410 (Grade E-250A) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 Nos gaps/cuts/holes in each post for providing/laying barbed wire and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed. (Note :- Supply and fix barbed wire shall be measured and paid separately). Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Material and labour for providing cement concrete in foundations 1:2:4 type B2 (nominal mix using 40 mm graded stone aggregate) filling and mass concrete for securing/ fixing of fencing post/ strut in under water including necessary formwork and dewatering as required at site complete all as specified and directed.

Dismantling of old GI barbed wire fencing of any description from RCC fencing post complete all as specified & directed. (Note. Each line of wire to be measured separately)

Supply,fixing Galvanized, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, conforming to IS, and straining and fixing to any type or standard rails. Straining bolts. Including, securing or tying at crossings with and provn of galvanized mild steel wire staples or steel pins etc complte all as specified and directed (Note : Each line of wire to be measured seperately)

Material and labour for PCC type C2 (1:4:8) using 40mm garded stone aggragate as in surface channel and drains etc complete all as specified and directed.

Extra for forming fair finished drain or chanel 30cm inner girth in cement concrete ,using extra cement ,including forms, moulds, mitred/stopped ends etc.

Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying birla wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall complete all as specified and as directed.

All as per item no. 29 above but, on ceiling.

Material and labour for preparation of old treated plastered surfaces of wall by washing, rubbing down cement base paint surfaces of wall and applying one coat of cement base pain, first quality,t complete all as specified and as directed. Make for item nos. 29 to 31:- Asian / berger / Jenson & Nicholson / Shalimar.

Supply and fix in repair Vitreous china wash down water closet pan ( pedestal pattern ) , white with necessary seat cover including connection to drain ( or out going pipe ) and to flushing pipe , antisyphonage pipe complete all as specified .

Supply and fix in repair Vitreous china Urinal bowl type flat back , size 465 X 355 X 265mm white with grating and union for discharge pipe including providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement complete all as specified and as directed .

Supply and fix in repair one pieced-white wash basin without pedestal 550 X 400 (oval/square pan) a/w brackets / MS nuts and bolts for fixing; fixed with and incl 32mm dia brass CP waste coupling and connecting waste pipe etc complete all as specified and directed. Make for item Nos. 32 to 34:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed. Make:- M/S Johnson Padder / Hindustan sanitary ware / Millennium / Cera / Blue Star Polymers (Speed Flow) / Commander (Water Bird) / Hindware(Sleek) / Parryware(Slimline) / Prayag / Shakti Enterprises.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

All as per item No. 37 above but 20mm bore.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

All as per item No. 39 above but 20mm dia.

Supply and fix in repair health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar/Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair flexible tube 8mm dia and 1.5m long with nuts for fixing in 15 mm dia pipe complete all as specified and as directed Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair chromium plated concealed stop cock with fitting sleeves and adjustable wall flange with seal for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair chromium plated angular stop cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair chromium plated bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix chromium plated towel rack 600mm long with lower hangers complete all as specified and as directed. Make: Jaquar /Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair chormium plated pillar cock for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair glass shelf 600mm long complete all as specified and as directed. Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair toilet paper holder with flap recessed type (stainless steel) complete all as specified and as directed. Make: Jaquar / Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix in repair grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in same openings complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. Specie:-Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris. .

Supply and fix 30mm thick flush shutters solid core construction with particle board core and plywood face panels, one face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed. Make:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products / M/S Sylvan Plyboard( India) Pvt Ltd.

Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix sliding powder coated anodised aluminium window shutters for gauged/ gauged, aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)

S&F aluminium anodised powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02Nos in each door , hinges anodised aluminium snap beading screws etc. Complete all as specified. Make for item Nos. 58 to 60:- Jindal / Indal / Hindalco.

S&F Aluminum extruded section body door closer hydraulically regulated designation No 03, universal type,bearing ISI mark, suitable for door shutter of any width all as specified and directed. Make:- Priya / Everest / Sandhu / Universal.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm,conforming to IS, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, conforming to IS,fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. Make for item Nos. 70 & 71:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag

Material and labour for two coats of synthetic enamel paint, first quality, over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed. Make:- Asian / Berger / jenson & Nicholson / Shalimar.

Dismantling structural steel work etc all as specified and directed.

Dismantling post or struts (wood, steel ,RCC) any section including taking out embeded portion and making good disturbed ground ,post embeded in concrete,brick work and masonary etc. All as specified and directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded aggregate as in foundations, filling complete all as specified and as directed

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed. Make:- Jindal / tata / Sail /

Dismantling of steel sheeting ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .

Supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 Mpa (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self tapping screws of size 50/75mm and aluminium washer of suitable size in roof covering complete all as specified and as directed. Make:- M/STataBluescope steel ltd. (colorbond steel) or equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd. ) /Sshivshakti Fibre Udyog (Roofitt) / M/S Prestar Infrastructures projects LTD./ Jindal.

Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc.

Supply and fix GI frame work for non seamless ceiling comprising for GI perimeter channel of 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to sorrounding wall using nylon sleevless and screws at 450mm centre to centre /intermediate suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteness with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm including suspenders / hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including taking down complete all as specified and as per manufacturers instruction. Make:- M/S RR Ceiling Product / Armstrong / India Gypsum / Lafarge / Gypstone / Saint Gobain / Everest.

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed. (Make : Everest/Rhino/Charminar / M/S RR Ceiling Product / Armstrong / India Gypsum / Lafarge / Gypstone / Saint Gobain.

Material and labour for two coat of synthetic enamal paint, first quality, over a coat of red oxide primer on steel surface of any description,over 10cm widht or girth incl preparation of new surfaces all specified and directed.

Material and labour for two coats of synthetic enamel paint, first quality, a coat of red oxide primer on steel surfaces of any description not exc. 10cm width or girth including preparation of new surfaces complete all as specified and directed. Make for item Nos. 82 & 83:- Asian / Berger / Jenson & Nicholson / Shalimar.

Supply and fix , in repair, 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix in repairs 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and as directed. Make for item Nos. 84 to 88:- AMC / ICC / Hepco / PIC / BIC / SON/ Jayaswal Neco Industries LTD

Repair to Internal/Building Electrical system Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside serviceable materials for reuse including making good of the disturbed surfaces, all as specified and directed.

Taking down only old u/s items such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully including making good of the disturbed surfaces, all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS Unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed. Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries. Note :(i)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.

All as per item No 91 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 91 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No 91 here in above but for One call bell point control by one bell push switch complete all as specified as directed.

Ditto- all as per item No 91 here in above but for one light point controlled by two 2 way switch complete all as specified and as directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS Unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5sqmm PVC insulated unsheathed multi-stranded copper conductor cable drawn through and including PVC casing caping (medium duty) double lock type, size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switch socket combination etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed. Make of cable:-Polycab / Finolex / Havells / / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries. Note :(i)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.

Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS Unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be measured and paid separately. Make :(i) Cable - Havells/ Finolex / KEI / . / Polycab / / RR kabel./ C&S (ii) PVC Conduit :- Plaza / Presto Plast / Precision / Prayag.

All as per item No 97 here-in-before but for one 3/5 pin 6 Amps socket outlet on the same board with other switches.

All as per item No 97 here-in-before but for one 3/5 pin 6 Amps socket outlet on the independent board.

Ditto- all as per item No 97 here in above but for One call bell point control by one bell push switch complete all as specified as directed.

Ditto- all as per item No 97 here in above but for one light point controlled by two 2 way switch all as specified and as directed.

Material and labour for point wiring (Concealed type) with PVC insulated 1100 volts grade FRLS Unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be measured and paid separately. Make :(i) Cable - Havells/ Finolex / KEI / . / Polycab / / RR kabel./ C&S (ii) PVC Conduit :- Plaza / Presto Plast / Precision / Prayag.

Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed .

Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed..

Supply and fix switch socket combination 5 Pin 6/16 Amp flush type with complete all as specified and as directed.

Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified as directed

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals all as directed. Make for item Nos. 103 to 109:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth

Supply and fix bell push, flush type 6 Amps complete all as specified and as directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed..

Supply and fix electronic fan regulator stepped type & SOCKET flush type AC 240 volt complete all as specified and as directed..

Supply and fix call bell, AC, 230V single pole old unserviceable complete all as specified as directed. Make for item No 110 to 114- : Anchor / Cona / Bajaj / Crabtree / Havells / . / C&S / Standard

Material and labour for sub-main wiring (surface type) with two run of PVC insulated,unsheathed,FRLS Single core,multistranded copper conductor of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old sub main wiring with casing caping all as specified and as directed. (Note:Three run of 4.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC Casing shall measured as one unit). Make for item Nos115 & 116:- (i) Cable - Havells/ Finolex / KEI / . / Polycab // RR kabel (ii) Casing capping - Plaza / Presto Plast / Precision

Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, FRLS Single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old sub main wiring with casing caping all as specified and as directed. (Note:Three run of 6.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC Cassing shall measured as one unit).

Material and labour for sub-main wiring (Surface type) with two run of PVC insulated,unsheathed,FRLS Single core,multistranded copper conductors of size 10.0 Sqmm and one run of 10.0 Sqmm copper conductor as continuity earth wire,drawn through and inclg PVC Casing Caping (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit as specified and as directed. MAKE : (i) Cable - Havells/ Finolex / KEI / . / Polycab / (ii) Casing capping - Plaza / Presto Plast / Precision. Note:Three run of 10.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC Casing Caping shall measured as one unit). (ii): Chases cutting if any, is demeed to include in this item)

Supply and fix in replacement sheet metal enclosure n concealed) single pole & neutral for DBs (Double door)4 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure one complete all as specified as directed.(Chase cutting & make good disturb surface is included in unit rate)

All as per item No118 here in above but for 8 way SPN DB.

All as per item No 118 here in above but for 12 way SPN DB.

Supply and fix in replacement sheet metal enclosure n concealed TPN DBs (Double door)4 way with IP 54 Protection and 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure one complete all as specified as directed.(Chase cutting & make good disturb surface is included in unit rate). Make for item Nos. 118 to 121:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand / ABB/Hager.

Supply and fix in replacement of 4 way vertical type TPN DB in double door suitable for four pole MCCB (63A/100 A)as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB, etc complete all as specified and as directed.Note:- MCCB shall be measured and paid seperatly. Make: Havells Cat No.DHDLVDRWGOFO04 /C&S CAT no.CSDBMCCB100 DD04 IP43S/ INDOASIAN CAT no.9522/ L&T Cat no. DBVTPN04DD.

Supply and fix in replacement MCCB triple pole & neutral 63 amps,,16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed .

Supply and fix in replacement MCB TPN 63 Amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix in replacement MCB single pole & neutral / Double Pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix in replacement MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete including taking out old unserviceable one all as specified as directed. Make for item Nos. 122 to 126:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand / ABB/Hager.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 5 of SSR Pt I including taking down old earthing complete all as specified as directed

Supply and fix in replacement GI wire 4.0 mm as earth continuity conductor including taking down old unserviceable earth wire compleate all as specified and as directed.

Supply and fix in replacement GI pipe 15 mm bore (dia), light-grade for protection of earth electrode etc complete all as directed and as specified. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal / Nezone / M/S BST Infratech Ltd.

Supply and fix in replacement LED complete batten of extruded alluminum and PC diffuser of 18/20 /22 Watt and two Nos 2nd class hard wood round block and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fittings etc complete, all as specified and as directed. Make:-(i)C&S Cat Part No: NAKSHATRA/20W (ii) HAVELLS Cat Part No: LUMILINEPLUSBS20WLED865SPCSS (iii) JAGUAR Cat Part No: LGLZ01X020C / Panasonic Cat No PBTM08208/ BAJAJ CAT no. BCLAB20WH LED P

Supply and fix in replacement LED tube rod of capaicty 18/20 watt all as specified and as directed.- Make:-Model No. LTBL01X020XC of Jaguar / Model No TARIKA/18W of C&S / Model No.PHOTONULTRA 1213T8SSTL18WLED865SPC of Havells / . CAT no. HLP T81420(CW)/ / Century LED Cat No. Prism Pro 18WT 8 Tube(TWPP018C).

Supply and fix in replacement only batten without LED tube suitable for 18/20 watt 4ft led tube rod all as specified and as directed.- Make(For Batten):- Havells/BAJAJ / CENTURY / Crompton / Jaguar/C&S/. Note : batten should be suitable for led tube rods as above item no 131.

Supply and fix in replacement wall mounting light fitting of compact and decorative energy efficient luminaire with anti glare diffuser and decorative end caps suitable for 1x 8/9/10 Watt Led Tube and including 8/10 Watt LED Tube duly pre wired complete with all acessories inculding connection with flexible twin core copper conductor of size 23/0.0076 mm all as specified and as directed. Make:-(i)C&S Cat Part No: NAKSHATRA/10W (ii) HAVELLS Cat Part No: LUMILINEPLUSBS10WLED865SPCSS (iii) Century LED Cat No. Ultraline LED Batten 10W / BAJAJ CAT no. BCLSB 10W WH

S & F LED light fitting 1x9/10W bulkhead luminaires including LED light driver holderS & F LED light fitting 1x9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible opper conductor cable of suitable size including taking down old one all as specified and as directed. Make:- Havells/BAJAJ / CENTURY / Jaguar/Panasonic .

Supply and Fix LED Aviation light fitting for over Overhead Reservoir/ High mast pole with necessary fixing arrangement including taking out unserviceable one all as spedified and as directed. Make:- Bajaj / Havells/ Philips / L&T / ./Panasonic

Supply and fixing in replacement ceiling mounted decorative LED luminaire fitting complete 10/12 Watt,,etc complete, all as specified and as directed. Make : (i)C&S Cat Part No: CORONA-RND/12W / HAVELLS Cat Part No: INTEGRANEOSURFA CEDLS10WLED830S / JAGUAR Cat Part No: LNVE02R012SC / Panasonic Cat No PDLM26128 / BAJAJ CAT no. BGSLO SLEEK SURFACE 12W WH RD

Supply and fix compact type Wall mounted Street light Timer Panel with power coated mild steel enclousure for 415 Volt to be fixed on pole/Wall with provision of bus bar, Power Contractor 65 Amp, MC 63 Amp TPN, Digital Timer switch complete fixed with mild steel clamp, nut & bolt and including taking down old unserviceable one all as specified and as directed. MAKE-:Havells/Indoasian/Legrand.

Supply and fixing in replacement LED light fitting 25 watt energy saving versatile pressure die-cast aluminium building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete ,all as specified and as directed. Make : (i)C&S Cat Part No: INDUS25WLED/LS (ii) HAVELLS Cat Part No: ENDURAPEARLSL25WLED757SASYTOPC (iii) JAGUAR Cat Part No:LPCRSRT25WXC /Panasonic Cat No PSTM27258/ BAJAJ CAT no. ENXT P 30L WH SY PC SD

Supply and fixing in replacement LED light fitting 45 watt energy saving versatile pressure die-cast aluminium building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and as directed. Make:(i)C&S Cat Part No: INDUS45WLED/LS (ii) HAVELLS Cat Part No:ENDURAPEARLNEOSL45WLED757SASYTOPC (iii) Panasonic Cat No PSTM27458/ BAJAJ CAT no. ENXT P 54L WH CR PC SD

Supply only LED Flood light luminaries complete with panel and including LED Lamp of 150/160 Watt complete all as specified and as directed. Make:- Century LED Cat No. FWQU160C / Bajaj Cat No. BJFL150WLED/ Crompton cat No. LFLN-150-CDL/60-M.

Supply and fix modular switch 1 way, 6 A, 1 module all as specified and as directed.

All as per item no.53 but 16A, 1 module all as specified and as directed

Supply and fix socket 6A 2/3 pin combined 2 module all as specified and as directed.

All as per item no.143 but socket 6A/16A, 2/3 pin combined 2 module all as specified and as directed

Supply & Fix in Bell push switch designer modulare type 1 module. Make for item Nos141 to 145 - Anchor / Cona / Bajaj / Crabtree / Havells / . / C&S / Standard

Disconection and taking down ceiling mounted light fitting of any type and carry out the repair and re-fixing the same as per exisiting position complete all as directed .Note -Spares used in replacements will be measured and paid seperately)

Supply & fix in replacement tube light starter suitable for 1 x 36 W (PL-TYPE) fluorescent tube light fittings complete all as specified and directed. Make- Anchor / Cona / Bajaj / Crabtree / Havells / . / C&S / Standard

Supply & fix in replacement CFL lamp (PL-TYPE) 1x36 watt ,240 volt. Make-Philips model No MASTER PL-L 36W/865/4P ICT/25 or equvalent model of Bajaj/Havells

Supply & Fix in replacement modular type power unit 25 amps complete with 4 module plate, starter plug and socket. (Make-Crabtree (Sapphire) or Havells )

Supply and fix wire ONLY with PVC insulated 1100 volts grade (FRLS) unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) including taking down old unserviseable wire complete all as specified and as directed. Make :(i) Cable(red /black/ green) - Havells/ Finolex / KEI / . / Polycab /

Supply ONLY wire with PVC insulated 1100 volts grade (FRLS) unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) including taking down old unserviseable wire complete all as specified and as directed. Make :(i) Cable(red /black/ green) - Havells/ Finolex / KEI / . / Polycab.

Material and lauber for construction of earth pit chamber with cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4)

Materials & labour for painting to Pannel any size (inside/out side) with angle iron support from the ground level with two coat blue synthetic enamel paint (including preparation of old surface) in complete all as specified and as directed

Taking down old lighting conducter alumunium strip strip with saddel and re-fix with new saddel and screw etc from existing position complete all as specified as directed.

Supply and fix LED post top lantern with post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection including 35/40 Watt LED lamp with all accessories and fixing in existing post including taking out old unserviceable/broken light fittings complete all as specified and as directed. Make: Havells Cat No.RUBYPT35WLED757PSYMTOPC / Panasonic Cat No PPTM024808.

Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw including taking down old one complete all as specified as directed

Supply only insulation tape not less than 15mm width strip suitable foe electrical work complete all as specified and as directed.

Repair to E/M appliance(Geyser) Taking down Gysers of any make/ model / type / capacity after disconnecting all electrical and water supply line for repair/ replacement of parts and components, refixing in old position after repair/replacement complete all as specified and as directed by Engr-in-charge. Note (i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE.

Supply only, Apparatus assembly plate ( 8/9 hole) for Gyser of 25 Ltrs / 50 Ltrs capacity (as per existing sample) complete all as specified and directed.

Supply only, Thermostat straight stem type complete all as specified and directed. Make : Bajaj/ Elcon/GirishEGO.

Supply only, Heating Element 1500 watt suitable for Gyser of 25/50 Ltrs capacity Triangular/Round type complete all as specified and directed. Make : Bajaj / Rex

Supply only, Indicating (Red/Green) lamp LED type (square/Round) button type for Gyser of 25/50 Ltrs capacity complete all as specified and directed.

Supply only, PVC flexible cold water inlet pipe 15 mm dia 600 mm long complete all as specified and directed. Make : Prayag / Polytuf / Prince / Supreme

All as per item No.75 here-in-before but Hot water pipe ( Inlet wiremess type).

Supply only, cast copper alloy, CP stop cock 15mm bore complete all as specified and as directed. Make: :- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag. .

Supply only, round type 3 core incoming copper cable of size 2.5 sqmm for 25/50 Ltrs capacity Gyser complete all as specified and as directed. Make : Finolex/Havells/Polycab/ / RRKabel / KEI,)

Supply only, Water storage tank for Gyser of 25 Ltrs / 50 Ltrs capacity (as per existing sample) complete all as specified and directed.

Repair to fan: - Taking down carefully Ceiling Fans of any make, model and capacity from their existing places for servicing i. e. lubricating / Greasing and for rewinding/ painting by dismantling the same and keep the blades, canopy, splitpin and other parts and components in safe custody and hanging / fitting on it's previous position after repair/rewinding/painting/replacement of spares etc complete all as directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE. (iv) Rewinding and painting shall be measured and paid separately. Existing makes :- Bajaj, Khaitan, Usha, Himadri

All as per item No.168 above , but exhaust fan

All as per item No. 168 above , but Air circulators / Wall mounted fans

All as per item No. 168 above , but Floor mounted pedestal Fans

Supply only, GM Bush for ceiling fan 1200/1400 mm sweep/ Exhaust Fan 230/300/350/450 mm sweep/or any type fan complete all as directed.

Supply only, Ball bearing (cat No. 6201) for ceiling Fan/Exhaust Fan / or any type fan complete all as directed. Make:- TATA / SKF / NBC

All as per item No. 173 here-in-before but cat No. 6202.

All as per item No.1 73 here-in-before but cat No. 6203.

Supply only, capacitor 2.5 mfd (OIL FILLED), 220 volts complete all as directed (Make:Tipcon/Universal/Sarda).

All as per item No. 176 here-in-before but 3.0/4.0 mfd. (Make:Tipcon/Universal/Sarda).

Supply and fix in replacement of louver shutter for 300 mm sweep exhaust fan made of MS sheet folded type, of existing make, complete all as directed.

All as per item No.178 here-in-before but for 450 mm sweep exhaust fan.

Material and labour for painting by spraying with synthetic enamel paint, first quality, to Ceiling Fans / Exhaust Fans/ Air Circulators wall mounted Fans/Floor mounted pedestal Fans including Blades/Down rods/ Canopy/Stand, Casing/ Cage and all accessories after preparation of surfce including thoroughly rubbing /cleaning old rusted spot complete all as specified and as directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar

Material and labour for Rewinding of ceiling fans armature of 1200 mm/1400 mm sweep of any make & Model with replacing the burnt out winding by new super enameled high grade copper wire of existing gauge and number of turns and all insulating materials including heat vernishing and testing complete all as directed .

All as per item No.181 here-in-before but for exhaust fan 230mm/ 300mm sweep, single phase, 230 volts

All as per item No. 181 here-in-before but for wall mounted fan 300/400 mm sweep, three phase, 230 volts

Supply and fix in replacement fan blades for exhaust fan of 300 mm sweep as per existing make and type complete all as directed.

All as per item No. 184 here-in-before but for exhaust fan of 450 mm sweep.

Material and labour for lathe work for worn out spindle of ceilling fan /Exhaust Fan/Air Circulators/Wall mounting Fan of any sweep , make & Model with replacing the worn out spindle by new one of existing size and materials including testing for free motion of fans complete all as directed.

Material and labour in replacement of incoming twin core copper flexible wire ( not more than 45cm) of size 14/0.0076 from ceiling rose to ceiling fan / exhaust fans complete all as directed. (Make : FINOLEX /KEI / HAVELS / POLYCAB / / RR kabel / C&S / .).

Supply and fix in replacement 3 pin plug top 6 Amps for air circulator wall mounted fan/ floor mounted pedestal fans. Make : Anchor / Cona / Bajaj / Crabtree / Havells / . / C&S / Standard

RUNJEN CONSTRUCTION

M/S KARTICK DUTTA

SHRI MILAN CHANDRA DAS

M/S MAHENDRALALL DUTTA

RBS Builders

MAZUMDER & CO

RADHA ENTERPRISE