WBMAD/GM/PW/NIT-27/2025-26/29

Earth work in excavation of foundation trenches or drains, in all sortsof soil (including mixed soil but excluding laterite or sandstone)including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item ncludes necessary trimming the sides oftrenches, levelling, dressing and ramming the bottom, bailing out wateras required complete. (a) Depth of excavation not exceeding 1,500 mm. Building p -1, It-2(a

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of inished quantity of work) (a) With earth obtained from excavation of foundation. Building P-1, It-3(a)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand Building P-14, It-1

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. As per rate analysis

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.( I ) Pakur Variety. Foundation & Plinth , Ground Floor As per rate analysis

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initialstraightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild SteelI. (ii) JSW/JSPI........ /SSL. Foundation & Plinth , Ground Floor . Building P-43,It.- 40( a ) (I), ( I I)

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local. Building P- 114,Item No. 1

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. In Groung Floor Building P- 117. Item No.-1

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Building p -200 It No.-1(b)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On Wooden or Plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) Building p -200, It No.2A( a )-iv

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor. (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Building P - 42, It-36 ( a )

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C). Building P-46, It-1

125 mm. thick brick work with 1st class bricks in cement mortar (1:4 ) in ground floor. Building P-16, It.-16

Labour for Chipping of concrete surface before taking up Plastering work. Building P- 192,It-1

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar, (c) 10 mm thick plaster, (ceiling plastering) Building p-189,It.-1(ii)(c) & (b

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m Building P- 192,It-15.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats.In Ground Floor. Building P -196 It No. -8 (b )

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion Building P -197, It No. 17 ( a )

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One Coats ii) Solvent based interior grade Acrylic Primer Building P-195, It No. - 7 ( a ) - ii

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface. Two Coats Building p -196, It No. -10

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing upto 16 Kg./sq.mtr. First Floor Building P-104, It-13 (a),(ii)

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Building p -200 It No.-1 (a)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) Building p -200, It No.2A( b )-iv

Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/- 0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete Building p -117,It No.-8

Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor. Building p -134,It No.- 26

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes: (ii) 110 mm. Dia. Building P - 213 It-21 ( A ) ( ii )

B) UPVC Fittings: c) Bend 87.5 degree (ii) 110 mm. Dia. Building P - 213, It-21 (B) c(ii)d(ii)

B) UPVC Fittings: d) shoe (ii) 110 mm. Dia. Building P - 213, It-21 (B) c(ii)d(ii)

Supplying, fitting and fixing shower of approved brand and make. Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(b) With 'S' trap S&P P-79, It.-2 ( b )

Supplying, fitting and fixing 10 litre P V C low-down cistern conforming to I. S. specification with P. V. C. fitting complete C. I. brackets including two coats of painting to bracket etc. S&P P-36,It.-2

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm.

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm. S&P P-80,It.-7 (I)

Supplying, fitting and fixing bib cock or stop cock. Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar S&P P-6,It.-7,b ( I ), 7 (C )( I )

Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). S&P P-6,It.-7,b ( I ), 7 (C )( I

Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). S&P P-44,It.-16

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 15 mm S&P P-5,It.-5 (Viii),(Vi)

Supplying, fitting and fixing towel rail with two brackets. (b) Aluminium,(i) 25 mm dia. and 450 mm long.

Supplying, fitting and fixing liquid soap container. (a) Cromium plated.

Supplying, fitting and fixing C.I. round grating. (i) 100 mm S&P P-67, It.-18 (i

Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with (b) Porcelain of approved make. S & P P-80, It - 9(b)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. (b) 1000 litre capacity S & P P-37, It.-6,( b)

Labour for hoisting plastic water storage tank (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L. S&P P-37,It.-10 (i)(a)

Open jointed stone ware pipe 100 mm dia. supplied, laid and fitted in position duly encircled all round by 150 mm thick layer jhama metal (38 mm to 50 mm size) including excavation of earth in any soil upto required depth including refilling trench,watering and ramming complete. (Cost of Jhama Metal to be paid seperately). S & P P-89, It.5

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 A) (i) Single Socketed 3 Meter Length S&P P-68,It.23 (A)(I)(b) (a) 75 mm

(b) 110 mm Dia

(c) 160 mm Dia

B) Fittings, a) Couplar, (i) 75 mm Dia

(ii) 110 mm dia

b) Tee, (i)75 mm Dia

(ii) 110 mm dia

c) Door Tee, (i) 110 mm Dia

d) 87.5 Degree Bend (i) 75 mm dia

(ii) 110 mm dia

e) Door Bend (i) 110 mm dia

f) Vent Cowl (i) 110 mm dia

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer- in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground (i) 75 mm dia. S&P P-74,It.24 (A) & (B)

(b) 110 mm dia

(c) 160 mm dia

(B) Under ground, (i)75 mm dia

(ii) 110 mm dia

(iii) 160 mm dfia

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm. thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety. (i) Tor steel/Mild SteelI. JSW/JSPI........ /SSL.