Construction of new open store shed at 132KV S/s, Ramnagar under OandM Division, PTCUL, Kashipur

Earth work in excavation manul mean aroundn outside of chain link fencing with dressing of sides and ramming of bottoms, spreading of antiweed getting out the excavated soil and disposal of surplus as directed within a lead of 50m.

Supply and spreading of earth by earth work in excavation by mechanical means (Hydraulic excavation )/manual means over surface areas, in trenches, plich, sides foundation etc. In layers not exceding 20cm in depth consolidation each disposited layer by ramming and watering including all llead lifts (land of earth supply to be arranged by the contructor at his own cost).

Work of providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. All work upto plinth level: 1:4:8 (1cement : 4coarse sand : 8graded stone aggregate 20mm nominal size).

Work of providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. All work upto plinth level: 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate 20mm nominal size). (M15)

Work of providing and laying in position specified grade of rainforced cement concrete, including the cost of centering and shuttering. All work upto plinth level: 1:1.5:3 (1cement : 1.5coarse sand : 3graded stone aggregate 20mm nominal size). (M20)

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars.

Brick work with common burnt clay F.P.S non modular bricks of class desiganation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 corase sand).

12mm cement plaster of mix : 1:4 (1cement : 4coarse sand).

One primary coat and two coat of approved colour cement paint including supply of all material, labour and T&P.

Structural steel work MS angle, MS channel, MS square etc. different size and type riveted bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, figing in position applying a priming coat of approved steel primer all complete.

Work of providing and fixing of 50x5mm MS strip for holding of GI sheet on roof including cost of material, labour and T&P.

Work of providing and laying of razor wire barbed fencing on MS angle for safety view of material in store building cost of material, labour and T&P.

Work of providing corrugated of GI sheet roofing including curved surface fixed with polymer coated J hooks, bolts and nuts 8mm, diameter with bitumen and GI limpet washers including coat of approved steel primer and two coats of approved paint on overlapping of sheets complete with 1mm thick zinc coated GI sheet with cost of material, labour and T&P.