Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.9 L
Closing Date
11 Aug 2026, 6:00 pmClosed
Executive Engineer
KDA Kota
CIVIL WORK
2026_UITKo_581283_1
NIT 16/2026-27 (8)
Open Tender
Civil Works
Percentage
180 days
Kota
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,500
3500 Secrectry KDA, 1500 MD RISL
₹2.9 L
Yes
18 Aug 2026
5 Aug 2026
12 Aug 2026
5 Aug 2026
11 Aug 2026
5 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and Fixing of Armstrong Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x300mm (Nominal), 600x600mm (Nominal), 600x1200mm (Nominal) and 600x1800mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of aluminium and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass supstrate shall have a recycle content of 85%. | |||||
| 2 | An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer's recommendation. Install aluminium grid (provided by others) of section 100x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x300. 600x600mm, and 4 nos. in case of 600x1200mm and 600 x 1800mm Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained. | 352 | SQM | 5,820 | ₹20,48,640 |
| 3 | GRID CEILING Armstrong make 600×600×15 ceiling with G.I. Channels (gauge 24mm) support @ GRID OF 600×600
with all necessary light fitting and necessary cutouts as required (ARMSTRONG-PRIMA BOARD FINE FISSURED or EQUVALENT-rating has to be same) | 435.22 | SQM | 1,215 | ₹5,28,792.3 |
| 4 | Providing and fixing Mandana Cobble Stone flooring work dressed stone 100mm thick in hound finished with pattern as per approved design over 25-50mm thick base in CM 1:6 incl. pointing with cement sand mortar 1:2 (1 Cement:2 sand)match the shade of stone with joint complete in all respect as per direction of engineer-in-charge & Architect with all lead & lift. | 900 | SQM | 3,900 | ₹35,10,000 |
| 5 | Supply and installation of Centre Table Overall Size 1215W X 605D X 450H mm, Table Top Made Of Veneer & Melamine polish, Inner material used in Table top is 18mm thickness commercial block board & prime quality veneer pasted on it with Melamine polish, Table Top Size 1215W X 605D X 18mm Thickness, Teak colour Veneer pasted on table top, Legs made up of solid teak wood material of size 60W X 60Dmm, Under structure Top Supported Panel Made Of Prime Quality Solid teak Wood material of size 60x20mm, complete structure are in Melamine polish, commercial Board Use Prime Quality With ISI Marked , All Wooden Panels Cleaning Corner Knitted Finish , Wooden Panel Joint Leg To Leg Supported To Top . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. | 4 | EACH | 16,170 | ₹64,680 |
| 6 | Supply and installation of Three seater Sofa , Overall Size 1920W X 750D X 750H , Sofa structure made good quality solid wood of size 38x25mm Uphostered With Leatherite & HD Foam used in seat & Back density 32 KG/m3, Sofa base Supported on metal legs , Sofa Back Height from ground is 750mm , The rounded Armrests Provided with Sleek And Stylish Look, complete Understructure Made of Solid Wood Structures With Heavy duty zig zag Spring For Maximum Comfort, Seat Height From Ground 460mm , 100mm High Legs . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. | 15 | EACH | 53,276 | ₹7,99,140 |
| 7 | Providing and fixing 12MM toughened glass and staking with spider SS fittings & Weather proofing of glass panels using weather proof silicon (Dow Corny 789) complete in all respect as per drawings attached (Drg-7), as per direction of Engineer-in-charge and Architect with all lead and lift | 25.5 | SQM | 8,200 | ₹2,09,100 |
| 8Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). | |||||
| 9For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). | |||||
| 10 | Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 1,240.5 | KG | 381 | ₹4,72,630.5 |
stage.html
html • 0.00 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.88 MB
BOQ_1032908.xls
BOQ • 0.38 MB
Special_Condition_8.pdf
Tender Documents • 0.52 MB
Corrigendum_16.pdf
PDF • 0.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].