S/R to PWD Road to Panasuan Road for the year 2025-26

Clearing and grubbing road land including uprooting trees rank vegetation, grass, bushes, shrubs, saplings and girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness etc complete as per the direction of the Engineer-in-Charge.

Providing, laying, spreading & compacting graded stone aggregate to to Wet Mix Macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface & compacting with vibratory roller to acieve the desired density as per clause 406 of MoSRT & H specifications for road & bridge works.(4th Revision)

Providing & laying Bituminous macadam with hotmix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 grade of bitumen transported to site laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level & alignment & rolling with smooth wheeled vibratory & tandem rollers to achieve desired compaction as per clause 504 of MoSRTH specifications for Road & Bridge works ( 4 th revision)

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bitumenous etc complete as per dierection of Engineer-in-Charge.

Providing and applying tack coat with bitumen Emulsion using Pressure distributor @ 0.20kg/sqm on the prepared surface cleaned with mechanical brooms as per clause 503 of MOSRT & H Specifications etc complete as per the direction of Engineer-in-Charge.

Providing & laying Semidense bituminous concrete (SDBC) with batch type hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder (60/70) penetration Grade of Bitumen, transporting the hot mix to the site, laying with a Hydrostatic paver Finisher with sensor control to the required grade, level & alignmen, rolling with smooth wheeled vibratory & tandem Roller to achieve the desired compaction as per clause 508 of Mo SRT&H Specifications etc complete as per the direction of Engineer-in-Charge.

Providing Gravel in berms including watering ramming with rammer with all cost, conveyance, royality of all materials etc complete as per direction of Engineer-in-charge.

Reinforced cement concrete M-15 Grade Kilometre stone of standard designs as per IRC-8-1980 ,Fixing in position including painting & printing etc complete

Ordinary Kilometre Stones

200 Mtr. Stones

Supplying, fitting, fixing of Retro-reflectorised cautionary, mandatory & informatory signs as per IRC-67 made of encapsulated lens typ reflecting sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 2 mm thick with area exceeding 0.90sqm supported on a mild steel angle iron post 75mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600mm. 60cm below ground level as per approved drawings & Technical Specification Clause 801 including excavation, curring etc. complete under the supervision of Engineer-in-charge.

Main Information Board

Supplying, fitting, fixing of Retro-reflectorised cautionary, mandatory & informatory signs as per IRC-67 made of encapsulated lens typ reflecting sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600mm. 60cm below ground level as per approved drawings & Technical Specification Clause 801 including excavation, curring etc. complete under the supervision of Engineer-in-charge.

900mm equilateral triangle

800 mm x 600 mm rectangular

600mm Circular

Supplying & fixing 15 cm dia 1.00 m long guard posts of RCC (1:2:4) using 7.5 kg of steel for each guard post with 12 mm size black hard granite chips including cost of all reinforcement and materials, centering, shuttering and watering, carrying etc complete

Providing & applying 2 coats of weather coat paint to unplastered surface after cleaning the surface of dirt, dust, oil, greases, efflorescens & applying paint @ 1litre per 2 sqms required for the work complete. as per the direction of Engineer-in-Charge.

Please Enable Macros to View BoQ information