CONSTRUCTION OF TOILET BLOCK AT TEMPLE MARG GATE NO 05 NEAR HPPWD DIVISION JAWALAMUKHI AT WARD NO-01

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 gradedstone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:-1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :With F.P.S.(non modular) bricks

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1cement: 6 fine sand)

Providing and fixingG.I.pipes complete withG.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore

Providing and fixingG.I.pipes complete withG.I. fittings and clamps, i/c cutting and making good the walls etc.20 mm dia nominal bore

Making connection of G.I.distribution branch withG.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

S.C.I.soil,wasteandventsinglesocketedpipe1.80metreslong:75 MM DIA

S.C.I.soil,wasteandventsinglesocketedpipe1.80metreslong:100 MM DIA

Providing and fixing trapof self cleansing design withs crew eddown or hinged grating with or with out ventarm complete, including cost of cutting and making good the walls and floors :Sand cast iron S&S as per IS: 3989

Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore

SUBHAM Sharma (BID ID -579393)

Rishav (BID ID -579470)

TUSHAR SHARMA (BID ID -579439)