Special repairs for improvement of existing CI GI pipe lines in ASC lines at sector B under GE Utility Ambala Cantt

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for laying water main pipe/ cables etc., getting out and forming bottom surface to required gradient, complete all as specified and as directed.

Returning, filling in, of soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified and as directed.

Removing excavated materials not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Dismantling and taking out existing corroded/unserviceable CI/GI pipe 100 mm bore including all fittings such as bends, elbows and tees etc., with spigot and socketed ends and lead joints including burning out joints and recovering lead, complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Dismantling and taking out existing unserviceable CI/GI pipe 80 mm bore including all fittings such as bends, elbows and tees etc,.taking out lead from joints, removing the unserviceable pipes from site to safe custody, complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Dismantling and taking out existing unserviceable CI/GI pipe 50 mm bore, including all fittings such as bends, elbows and tees etc,.taking out lead from joints, removing the unserviceable pipes from site to safe custody, complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Dismantling and taking out existing unserviceable GI pipe 40mm bore, including all fittings such as bends, elbows and tees etc,.taking out lead from joints, removing the unserviceable pipes from site to safe custody, complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Dismantling and taking out existing unserviceable GI pipe 25mm bore, including all fittings such as bends, elbows and tees etc,.taking out lead from joints, removing the unserviceable pipes from site to safe custody, complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Dismantling and taking out existing unserviceable GI pipe 20mm bore, including all fittings such as bends, elbows and tees etc,.taking out lead from joints, removing the unserviceable pipes from site to safe custody, complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Supplying, laying, jointing & testing in trenches 100 mm bore ductile iron pipe , SS class K-9, ISI Marked, spigot and socketed ends complete with push on rubber joints all as specified and directed by Engineer-in-Charge Note: Excavation, earth work, joints and CI/DI fittings will be measured and paid separately.

Supplying, laying, jointing & testing in trenches 80 mm bore ductile iron pipe , SS class K-9, ISI Marked, spigot and socketed ends complete with push on rubber joints all as specified and directed by Engineer-in-Charge Note: Excavation, earth work, joints and CI/DI fittings will be measured and paid separately.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 50mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., complete all as specified and as directed. Note- (Excavation and earth work will be measured and paid for separately.)

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 40mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., complete all as specified and as directed. Note- (Excavation and earth work will be measured and paid for separately.)

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 25mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., complete all as specified and as directed. Note- (Excavation and earth work will be measured and paid for separately.)

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 20mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces. union etc complete all as specified and as directed. Note- (Excavation and earth work will be measured and paid for separately.)

Supplying and fixing 25mm bore `Medium grade`, ISI marked, GI tubing with all fitting and fixed with clips, wall hooks, wooden plugs, etc. to walls and ceilings or laid in floors complete all as specified and as directed.

Supplying and fixing 20mm bore `Medium grade`, ISI marked, GI tubing with all fitting and fixed with clips, wall hooks, wooden plugs, etc. to walls and ceilings or laid in floors complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 150 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete including taking down old unserviceable sluice valves complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 100 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete including taking down old unserviceable sluice valves complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 80 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete including taking down old unserviceable sluice valves complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally, ISI marked, Class-2, for iron pipe of size 50mm bore complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 40mm bore complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 25mm bore complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 20mm bore complete all as specified and as directed.

Material and labour for rubber gasket (Tyton) joints suitable for 100 mm bore DI pipes and fittings including jointing material complete all as specified and as directed.

Material and labour for rubber gasket (Tyton) joints suitable for 80 mm bore DI pipes and fittings including jointing material complete all as specified and as directed.

Matereial and labour cast iron/ ductile iron pipe fittings upto 150mm bore for socket and spigot / flanged pipe such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed.

Supply and fixing in replacement for PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20mm bore complete all as specified and as directed.

Material and labour for brick masonry valve pit nominal size 60 cm x 60 cm x 60 cm with one brick thick wall using sub class 'B' brick in cement mortar 1:6 over 20 cm thick PCC 1:3:6 type C-1 platform with 15 cm off set on all sides including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortarf 1:4 and 50 mm thick pre-cast RCC cover 1:2:4 type B-1 (in two equal parts) with 10 mm dia deformed bars @10 cm c/c both way with 150 mm dia hole in the center complete all as specified a

All as per serial item No 1.29 here in before but of size 90cm X90cm X90cm complete all as specified and as directed.

All as per serial item No 1.29 here in before but of size 120cm X120cm X120 cm complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregates), as in bed of channel foundation filling/ channel bedding and mass concrete complete all as specified and directed.

Note:- Amount of credit of Rs. 3,95,460.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 46 & 47 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Gupta Enterprises

M/S SHANTI CONSTRUCTION

M/S Sonu Traders

R D Bansal

Puneet Sharma