Construction of Anganwadi Centres

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10mts including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting,etc.complete for finished item of work excluding seigniorage excluding dewatering charges etc complete as per SS-20-B (APSS 308) for Building foundation.

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10mts including all operational, incidental,labour charges such as shoring,sheeting, planking, strutting,etc.complete for finished item of work excluding seigniorage and excluding dewatering charges etc complete as per SS-20-B (APSS 308) for Curtain Walls

Plain Cement Concrete (1:4:8) Proportion nominal mix (Cement:fine aggregate: coarse aggregate) for below flooring beds using 40mm size (SS5) hard granite metal up to Plinth Level from approved quarry including cost and conveyance of all materials like cement,sand,coarse aggregate, water etc, to site, and excluding seigniorage charges, sales& other taxes on all materials including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No.402) for:- Machine Mix-PCC (1:4:8) NOMINAL MIX.

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290X200X140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Basement

Filling with useful available excavaed earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.(APSS.NO.309 & 310) for :- Refilling foundations.

Filling with carted gravel in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating Each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of gravel for finished item of work. (APSS No 309 & 310)

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials excluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials excluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pedstals.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials excluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinth beam.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials excluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials excluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Floor Beams.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials excluding all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof Slab 115MM thick.

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Lintels.

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work.

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pre Cost Slabs of 25 mm thick

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pre Cost Slabs of 50 mm thick

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290X200X140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Providing Impervious coat to exposed RCC Roof surface with CM (1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is given including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Ceiling Plastering with CM(1:3) Prop: 12mm thick in single coat spong finish including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)

Plastering to even surfaces of wall with CM (1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)

Plastering with CM (1:5) Prop:12mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Supply and fixing of M.S.plain sheet door using 32x32x4mm angular for frame of 1no. horizontal,2nos.verticles of the frame and shutters of size 0.50x2.05m -2nos., each made with 30x30x4mm angular alround,20x4mm flat for horizontals 2nos.@ rear side, and supported with 20 gauge M.S.plain sheet,0.30m length aldrops-2nos., each made with 16mm dia M.S.bar of 0.25m length -1no.,20x4 mm flat 0.08m length for rings of 3nos.,0.15m length for supporting, 8mm square bar of (0.30+0.10)m length for locking arrangements,But hinges 4 nos 75mm long, tower bolts 0.15 m length -2nos.,each made with 12mm dia M.S.bar of 0.15m length-1 no.,,20x4 mm flat 0.06m length for rings of 2nos.,(0.20+0.04+0.04)m length for supporting, 6mm M.S.bar of 0.06m length for rings-1no.,0.05m length crank bolts- 6 nos., each made with 12mm dia M.S.bar of 0.05m length-1no.,20x4mm flat 0.12m length-2nos.,40x40x6mm angle of 0.075m length each of 6nos.,for holdfasts including red oxide painting including all etc., complete for size 1.05 x 2.10m.

Supply and fixing of M.S.plain sheet door using 32x32x4mm angular for frame of 1no. horizontal,2nos.verticles of the frame and shutters of size 0.50x2.05m -2nos., each made with 30x30x4mm angular alround,20x4mm flat for horizontals 2nos.@ rear side, and supported with 20 gauge M.S.plain sheet,0.30m length aldrops-2nos., each made with 16mm dia M.S.bar of 0.25m length -1no.,20x4 mm flat 0.08m length for rings of 3nos.,0.15m length for supporting, 8mm square bar of (0.30+0.10)m length for locking arrangements,But hinges 4 nos 75mm long, tower bolts 0.15 m length -2nos.,each made with 12mm dia M.S.bar of 0.15m length-1 no.,,20x4 mm flat 0.06m length for rings of 2nos.,(0.20+0.04+0.04)m length for supporting, 6mm M.S.bar of 0.06m length for rings-1no.,0.05m length crank bolts- 6 nos., each made with 12mm dia M.S.bar of 0.05m length-1no.,20x4mm flat 0.12m length-2nos.,40x40x6mm angle of 0.075m length each of 6nos.,for holdfasts including red oxide painting including all etc., complete for size 1.05 x 2.10m.

Supply and fixing of M.S.plain sheet window using 32x32x4mm T- angula r alround, centre verticles -1 no.,10mm square bars of 0.90m length each at 150mm centre to centre and shutter of size 0.43x1.18m -2nos., each made with 25x25x3mm angular alround,20x4mm flat for horizontals-2nos. @ rear side and supported with 20 gauge M.S.plain sheet,100mm long M.S.tower bolts-2nos.,100mm long M.S.butthinges-2nos.,20x4mm flat of 0.20 m length 2nos.,for handles,32x32x4mm angle for holdfasts of 4 nos., of 0.25m length each including red oxide painting etc., complete for size1.20 x1.20m.

Supply and fixing of M.S.plain sheet window using 32x32x4mm T- angula r alround, centre verticles -1 no.,10mm square bars of 0.90m length each at 150mm centre to centre and shutter of size 0.43x1.18m -2nos., each made with 25x25x3mm angular alround,20x4mm flat for horizontals-2nos. @ rear side and supported with 20 gauge M.S.plain sheet,100mm long M.S.tower bolts-2nos.,100mm long M.S.butthinges-2nos.,20x4mm flat of 0.20 m length 2nos.,for handles,32x32x4mm angle for holdfasts of 4 nos., of 0.25m length each including red oxide painting etc., complete for size0.90 x1.20m.

Supply and fixing of VENTILATER of size 0.60X0.60Mts Outer frame 20X20X3 mm MS Plat and center supprots10mm square rods including cost and conveyance all materials and fabrication charges, fixing charges etc.,complete.

Flooring with Vitrified Double Charged/ Multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600mm x 600mm and thickness between 8-10mm regular finish and normal colours of make Jhonson & Jhonson, Kajaria, Nitco, Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Providing Skirting to internal walls to 15 cm height and risers of steps with Double Charged/ Multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600mm x 600mm and thickness between 8-10mm regular finish and normal colours of make Jhonson & Jhonson, Kajaria, Nitco, Marbonite, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work,

Flooring with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of

Providing Skirting to internal walls to height of 15cm and Risers with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work,

Flooring with 100mm thick cement concrete (1:5:10) using 40mm HBG Metal 100mm thick and 20mm cement concrete surface (Ellispatern 1st sort)

White washing two coats with White Cement or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Supplying, fitting and placing HYSD (Fe 500/tmt grade as per IS 1786-1985) bar reinforcement VRCC works complete including wastage, as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100,1600 MORTH for Bars 36mm dia and above, where welding required to be done compulsorily including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, opeational, labour cahrges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work. (APSS.No.126)

Supply and fixing of 25mm dia 2.20mm thick PVC Pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in Roof Slabs with all required accessories including all labour charges etc., complete.

Supply and fixing of 25mm dia 1.80mm thick PVC Pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in wall with all required accessories including masonry work for light,fan and separate plug point with hot dip galvanised metal box including all labour charges etc., complete.

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS/HFFR P.V.C.insulated ISI Copper Cable Finolex / RR kabel / Fortune Art EBXL make in the existing metallic/non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings (SSR-2011-12, item No. 2.1.1)

Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor/Gold medal olive/Million zoom make with ISI mark on a common switch board with earth continuity including wire leads earth connections including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work

Supply and fixing up to 25/26W Retrofit CFL of Makes bulb including cost and conveyance of all materials, taxes and all labor charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) fire retardant P.V.C. insulated flexible copper cable L&T/ Havels / Standard / Polycab / Power flex make with ISI mark in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Supply and errecting ceiling fan of Crompton high speed plus/ Bajaj electra 50/orient energy star with 3 blades and double ball bearings and with condenser AC 250V 50 C/S of 48" 1200mm sweep completely erected in position with out regulator, canopy down rod up to 301.80mm in length is provided with hook/clamps nuts and bolts and 24/02 felxible copper wire etc., complete and pointed with lettering by enamil paint the Sl.No.and date of errection including cost and conveyance of all materials and labour charges etc., complete.

Supply and erecting Electronic type regulator for ceiling fans 1200mm sweep complete erected on existing board make: Anchor,Penta Cherry/ Gold Medal Olive/Million Zoom including all labour charges.

Supply and Run of 2 of 6 Sq.mm WPSC ISI Aluminium wire of makes Finolex / GM/ million /Payal/ V-Guard/ Nakoda / Gold Medal / HPL/RPG/ Nandicab along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.