Augmentation_BS-I

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface]

Average run 4.5 mtr.

On Board

Supply & fixinig of 22 Watt wall mounted LED Batten with polycarbonate housing & integrated electronic driver. [Make : Philips/CGL/ Havells (Lumiline)/ Similar type of approved make]

Supply & Fixing only pendent light fitting complete with 9W LED lamp. [Make : Philips/Havells/Crompton Greaves].

Supply and fixing of 1200 mm, sweep Ceiling Fan. [Make:- Khaitan / Polar / Havell’s / Orient / CGL / any other approved make] with supply & fixing fan regulator and MS fan clamp (if applicable) of two pices type for RC celling or steel joist as per approved specification, fabricated from 40 mm x 9 mm MS flate incl.making good damages to building roof with satisfactory finishing and painting.

Supply and fixing of 12" Exhaust fan. (Heavy Duity) [Make:- Khaitan/Polar/Havell’s/Orient/CGL/any other approved make]

Supply and delivery of 220-240V, 400 mm dia, 115W Pedestal Fan [Make:- Khaitan/Polar/Havell’s/Orient/CGL/any other approved make]

Supply , delivery and fixing of 240V 6 Amp SP MCB C curve type [Make:-Havells/Siemens/L&T]

Supply , delivery and fixing of 240V 16 Amp DP Isolator. [Make:-Havells/Siemens/L&T]

Supply , delivery and fixing of 12 Way double door SPN DB [Make:-Havells/Siemens/L&T]

Supply & delivery of PVC moulded table of 850 x 850 x 725 mm size. [Make :- Nilkamal (Model-Marvel) / Supreme (Model- Arjun) / Cello)

Supply & delivery of PVC moulded chair without arm. [Make :- Nilkamal (Model-CHR-4002) / Supreme (Model- Dream) / Cello)

Supply and delivery of hot dipped galvanized octagonal pole 7 mtr. Long conforming to IS2629/BSEN ISO 1461 having dimension at top dia. 70 mm bottom dia 130 mm, thickness of sheet 3mm. The bottom of the pole welded with base plate of 200mm x 200 x 12 mm sheet with 4 nos. M 20 x 600 mm EN-8 grade J type Bolt. The material should comply as A. Shaft:S355 as per BS EN 10025. B. Finishing : HOT Dip Glavanized to BSEN ISO 1461. The pole is also fitted with Sword type single arm bracket made of light class 40NB GI pipe of length 1000 mm. It also equiped with a internal junction box at a suitable height from the base along with the locking arrangement facility. It should also withstand wind speed as per IS 857 Part III 1987.

Supply and delivery of hot dipped galvanized octagonal pole 7 mtr. Long conforming to IS2629/BSEN ISO 1461 having dimension at top dia. 70 mm bottom dia 130 mm, thickness of sheet 3mm. The bottom of the pole welded with base plate of 200mm x 200 x 12 mm sheet with 4 nos. M 20 x 600 mm EN-8 grade J type Bolt. The material should comply as A. Shaft:S355 as per BS EN 10025. B. Finishing : HOT Dip Glavanized to BSEN ISO 1461. The pole is also fitted with Sword type double arm bracket made of light class 40NB GI pipe of length 1000 mm. It also equiped with a internal junction box at a suitable height from the base along with the locking arrangement facility. It should also withstand wind speed as per IS 857 Part III 1987.

Erection of single galvanized pole of length of 7 mtr. In RCC(1:2:4) foundation of 400x400 mm of depth of 1300 mm delow GL and 200 mm just above GL 4 nos. "J" type foundation bolt of 20 mm dia and 600 mm long grouted into RCC foundation as per base plate of pole. Projected length of 100 mm also considered for fitted with the base plate of the pole. There should be a provision of two number flexible pvc pipe of 63 mm dia for cable entry as per supplied drawing, Also the foundatoin along material will be made as per departmental, drawing and design.

Supply, delivery and fixing of street light luminarie IP 66 LM6-HPDC Housing Street light aerodynamically designed with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no-BRP 032P LED 75 CW SLR PSU GR SDP) Make-Philips OR Equivalent and same techinal specification . Each Fixure is to be earthed with the erected steel tabular pole.

Supply and fiiting fixing of 3 phase connector box, 4 way terminal 63 amps brass earth terminal, 6 amps MCB and also fixing of LED light fittings on the top of 7 mtr pole braket (single arm) including wiring by 2x1.5 sqmm PVC cupper wire in 19 mm dia polythene pipe form pole box to LED fitting and necessary connection in complete as per direction of EIC.

Supply and delivery of following size PVC insulated 1.1KV grade XLPE Al. Ar. cable conforming to IS-1554/7098 (part-I) 1998 with latest amendment. [Make : Havels / Gloster / Polycab / Standard]

10 mm² 3 core

Laying of cable in underground trench 460 mm wide x 760 mm average depth, wide brick protechtion on the top of the cable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

3 Core 10 mm²

Laying of 3 core 25 sqmm cable on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make) tapes, anticorrosive paste & jointing materials :-

3 core 10 mm² cable

Supply, delivery & fixing of Die cast aluminium housing of gate light 1 x 40W LED Outdoor luminarie. [Model : RUBY OT 35W 757PSYMTOPC] [Make : Havells / any other approved make]

Supply, delivery & fixing of energy efficient LED highbay fixture with IP-66 and IK08 protected high pressure Al. Die Cast housing with polycarbonate cover.

Philips BY203P LED 83S CW PSU PC

GST @18% of Total Value in Amount

CESS @1% of Total Value in Amount

SUMON ELECTRICAL (BID ID -6205126)

SARKAR ELECTRIC (BID ID -6207175)