PROVISION OF WEATHER SHED, CHEMICAL EARTHING PITS AND ADDN/ ALTN TO TOILETS AT VARIOUS LOCATIONS OF HQ SWAC UNDER GE (AF) CHILODA

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded pointed in any mortar complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint free, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic digital dark and light coloured tiles in vertical surfaces of size 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Removing of existing filling in sunken floor of WC and repair to sunken floor with 50mm thick PCC (1:2:4) and side wall, 15mm thick plastering in CM (1:3) of internal surface with WPC, maintain to proper slope towads mouth of spout pipe, then filling 40 to 20mm graded aggregate, then fill with PCC (1:5:10) type E2 (using 40mm graded stone aggregates) there after 50mm thick PCC (1:2:4) and including 50mm bore GI water pipe light grade spout complete all as specified and as directed. Note:- WC, PVC pipe, socket & tiles shall be measured and paid separately.

M&L for crack filling with smartcare crack seal (upto 3mm deep cracks and rack to be open in V shape and then fill with suggested material, touch with acrylic distemper, including ladder or other necessary fittings complete all as specified and as directed.

Taking down chowkats with shutters of size n. exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S&F in factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed.

S&F aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S&F butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.

S&F aluminium handles 100mm size, cast type, anodised complete all as specified and as directed.

S&F in repairs vitreous china white wash hand basin oval type over/ under counter wash basin 560mm x 470mm complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern ) 'P' or 'S' type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs plastic water closet seat, white colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580mm x 440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flush pipe etc complete including making good to floor complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets flush pipe of polyethylene of low or high density PVC, 32mm dia, for low level cistern complete all as specified and as directed.

S&F in repairs vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F in repairs urinal spreader of chromium plated any colour for fixing with 15 mm dia pipe complete all as specified and as directed.

S&F in repairs 32mm PVC waste pipe for wash hand basin/ urinal/ sink 600mm long complete all as specified and as directed.

S&F in repairs grating doom 150mm x 150mm of brass chromium plated complete all as specified and as directed.

S&F in repairs elbow operated pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs fancy type, bib taps with chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs CP angle cock, fancy type, long body 15mm bore complete all as specified and as directed.

S&F in repairs health faucet with flexiable stainless steel hose and hook complete all as specified and as directed. Make:- Jaquar Cat No ALD-IVY-585 or equivalent of make as approved by GE.

S&F in two way bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repairs PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in repairs cast Iron P trap, 100mm size complete all as specified and as directed.

M&L for cast iron floor trap 100mm dia, with grating including jointing to waste pipe fixed with cement concrete (1:2:4) type B1 complete all as specified and as directed.

M&L for cast iron nahani trap 100mm dia, with grating including jointing to waste pipe fixed with cement concrete (1:2:4) type B1 complete all as specified and as directed.

M&L for preparation of old wall surface by washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coats of washable oil bound distemper complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of ceiling etc and applying two coats of white washing complete all as specified and as directed.

Excavating in post holes (or similar holes) each n. exc. 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick complete all as specified and as directed.

M&L for cement concrete type (1:3:6) type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

S&F framed work such as grills, gratings, purlin/ rafter of square/ rectangular hollow section pipes etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe. 290. Gde-E-165 complete all as specified and as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ not bolts etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new or previously untreated steel and iron surfaces of any description, over 10cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide, zinc primer complete all as specified and as directed.

M&L for chemical earthing complete with copper earth plate of 900mm x 600mm x 5mm buried directly in ground (Earth pit not less than 4.0 m below the ground level with top edge of the earth plate at a depth not less than 3.25m below ground level connected to and including copper earth strip 32mm x 6mm, 7.5m long and connected to test point terminal block by means of copper nuts, bolts, check nuts & washer etc. complete all as specified and as directed. Note:- The rate quoted shall deemed to be inclusive of the following:- (a) Excavation & earth work (filling in ramming in layers, watering etc. as directed) in any type of soil for earth pit of size 1.23m x 1.2m x 4.0m deep. (b) 20mm bore mild steel sleeve galvanized iron tubing light grade for watering purpose complete. (c) 63mm bore mild steel galvanized iron tubing light grade 2.85m long for strip protection. (d) Common salt and charcol dust in alteranative layers of 15 cm upto 90 cm above the top copper plate & one layer of 15cm magnisium sulphate (MgSO4) (Approximate quantity of salt 500 KG, Charcol dust 1000 Kg and MgSO4 150 Kg) (e) Earth chamber built in cement concrete (1:3:6) type C1 (using 20mm graded stone aggregates) of size 600mm x 600mm x 600mm (overall internal) comprising of 15cm thick PCC bed extended 10 cm beyond outer face of wall and 15 cm thick wall, 50 cm thick RCC chamber cover slab in RCC (1:2:4) type B1, reinforced with X PM (weight not less han 4 Kg/ Sqm) having MS angle frame of size 50mm x 50mm x 3mm with lifting arrangement MS cover painted with two coat green cement based paint including marking the chamber as earth pir with writing of inspection test date & earth result with black & white paint complete all as specified and as directed by Engr-in-Charge.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of sixe 20mm x 3mm copper strip compete all as specified and as directed.

M&L for point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through PVC heavy duty conduit with 1.5 Sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories, box made from not less than 1.6mm GI sheet factory made complete all as specified and as directed by Eng-in-Charge for One light point controlled by one switch.

All as per Item No. 48 above but point wiring for One fan point controlled by one switch.

All as per Item No. 48 above but point wiring for one 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 48 above but point wiring for one 3 pin socket outlet 5 Amps on the same board.

All as per Item No. 48 above but point wiring for one bell point controlled by one switch.

All as per Item No. 48 above but point wiring with cable of size 2.5 Sqmm PVC insulated on independent board for power plug 15 Amps complete all as specified and directed by Eng-In-Charge.

All as per Item No. 48 above but point wiring with cable of size 4.0 Sqmm PVC insulated on independent board for power plug 15 Amps complete all as specified and directed by Eng-In-Charge.

S&F modular switch, one way, 6 A,1 Module complete all as specified and as directed by Eng-in-Charge.

S&F modular switch, one way, 16 A, 1 Module complete all as specified and as directed by Eng-in-Charge.

S&F modular bell push 6 A, 1 module complete all as specified and as directed by Eng-in-Charge.

S&F modular bell AC, 230 Volts, single pole, ding dong, 1 module complete all as specified and as directed by Eng-in-Charge.

S&F modular socket 6/ 10A, 2/3 pin, combined, 2 module complete all as specified and as directed by Eng-in-Charge.

S&F modular socket 16/ 15A, 2/3 pin, combined, 2 Module complete all as specified and as directed by Eng-in-Charge.

S&F ceiling rose, 3 terminal, poly carbonate, isolated body complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 1 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 2 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 3 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 4 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 6 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 8 module complete all as specified and as directed by Eng-in-Charge.

M&L for submain wiring with two runs of 6.0 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/ casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/ coloured (as approved) top cover including one run of 6.0 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly complete all as specified and as directed by Eng-in-Charge. Note:- Two run of 6 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length.

S&F sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links (without MCB's) 8 ways SPN complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, SPN, 240 Volts, 32 Amps capacity complete all as specified and as directed by Engineer-in-Charge.

S&F MCB, single pole, 240 Volts, C series, capacity 6 to 32 Amps current rating, 10 KA breaking capacity complete all as specified and as directed by Engineer-in-Charge.

S&F blanking plate complete all as specified and as directed by Engineer-in-Charge.

S&F heavy duty air circulator pedstal fan 600mm sweep complete all as specified and as directed.

S&F 60 Watt flood light, green, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/ installations including copper conductor connected to ceiling rose complete all as specified and as directed.

S&F LED tube light fittings 1x20 W, 220 V, AC decorative box type, with driver, holder including LED tube light connecting up with twin core twisted flexible copper conductor cable of suitable size 1.5 Sqmm, surface and wall mounted LED type, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with and including all accessories internally prewired complete all as specified and as directed.

S&F LED light fitting 1x10 Watt, 230 Volts, surface and wall mounted LED type, complete with and including all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size 1.5 Sqmm complete all as specified and as directed.

S&F LED security light luminaire 1x25 W, having IP-65 protection, with minimum system efficency > 85% made of pressure die cast housing toughened glass in the front and peanut lens for batwing light distribution with excellent thermal management. The fitting should have rated CCT 5000 K with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F ceiling fan 1200mm sweep complete with blades, canopy, down rod and connecting upto and including provision of flexible three core copper conductor cable 23/ 0.0076 from ceiling rose to connector block complete all as specified and as directed.

S&F exhaust fan 300mm sweep, 240 V, AC in steel body, single phase complete with louvers and shutters including provision of flexible three core copper conductor cable 23/ 0.0076 from ceiling rose and grouting 04 Nos full threaded bolts and nuts complete all as specified and as directed.

S&F ceiling fan regulator, 120 Watt, 2 module complete all as specified and as directed.

S&F tube light fitting 22 watt including copper conductor connected to exiting ceiling rose complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.

M&L for plain cement concrete type (1:4:8) C-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) concrete complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in foundations, including rafts footings, foundation beams plinth beams, bases for columns etc, basement slabs etc complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in beams, cantilevers bressummers, lintels over 1.5m span etc complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to sides of concrete foundations footings, bases of columns, raft and raft beams, sides an d soffits (if any) of foundation and plinth beams and similar work complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or similar work exc 10cm but n exc 20cm wide for fair finished surfaces complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

All as per Item No. 93 above but 6mm to 8mm dia.

All as per Item No. 93 but 5mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for 40mm thick cement concrete (1:2:4) type B-0 (using 20mm graded stone aggregates) as in damp proof course to horizontal or vertical surfaces including necessary formwork etc, complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watereing and consolidation complete all as specified and as directed.

S&F aluminium butt hinges extruded aluminium alloy with a galvanised steel hinge pin anodised of size 100mm type C-21 complete all as specified and as direceted.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as direceted.

M&L for 100mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base of floor, path etc, complete all as specified and as directed.

M&L for cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigment laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregates) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar (1:4), complete all as specified and as directed.

M&L for 25mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in level course complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting/ dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per Item No. 108 above but without glazing bars

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F flush shutters of 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); upplied and fitted to chowkats complete all as specified and as directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F auminium extruded alloy handles fabricated type anodised of size 150mm complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring complete all as specied and as directed.

S&F stainless steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed with MS screw and bolts complete all as specified and as directed

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in complete in square n exc 0.50 Sqm each pane complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L for rendering 10mm thick on concrete surfaces of ceiling, chhja, facia and similar works in CM (1:3) finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

S&F 20mm dia mild steel decorative curtain rod with brackets of approved quality etc, complete all as specified and as directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F 25mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F vitreous china orissa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap, including PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.

S&F wash basin vitreous china 550mm x 440mm long white colour flat back including MS brackets etc complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 complete all as spoecified and as directed.

S&F 15mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 25mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 20mm ball PTMT valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F brass chromium plated shower rose 125mm size complete all as specified and as directed.

S&F aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and as directed.

M&L for cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M&L Cast iron Nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.

S&F PVC P trap 125/ 110mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

S&F HDPE pipes or pressure rating 6kgf/sqcm of 32 mm dia fixed/ concealed on walls or floors complete all as specified and as directed.

S&F 15mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and as directed.

S&F waste coupling of PTMT half or full threaded 32mm (Min wt 45gms) complete all as specified and as directed.

S&F in Fancy type chromium plated 15mm Bib taps cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe complete all as specified and directed.

S&F in stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and directed.

S&F 15mm angle/ stop valves cast copper alloy, screwed down high pressure fancy type chromium plated complete all as specified and as directed.

S&F 15mm bore pillar taps fancy type, chromium plated, cast copper alloy, screwed down, high pressure complete all as specified and as directed.

S&F anodised aluminium frame for doors, windows, ventilators/ partition/ of wall frame work etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F prelaminated particle board 18/ 19mm thick, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to wooden or aluminium frame work as in office computer station etc complete all as specified and as directed by Engr-in-charge.

S&F prelaminated particle board, 12mm thick exterior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to wooden or aluminium frame work as in office computer station etc complete all as specified and as directed by Engr-in-charge.

Extra over rates for external teak wood lipping 6mm thick, width 18 to 20mm fixed with nails complete all as specified and as directed.

Extra over rates for external teak wood lipping 6mm thick, width 12mm fixed with nails complete all as specified and as directed by Engr-in-charge.

M&L for 2nd class hardwood exc 25 Sqcm and n exc 50 Sqcm, plain fillets square, recangular or traingular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying two coats of OBD over a coat of chalk whiting complete all as specified and as directed.

M&L for preparing new decorated surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and as directed.

OCEAN CONSTRUCTION

divyarsh entrprise

Ramdev and Sons