Providing FHTCs under retrofitting in kanavaram habitation of kanavaram GP of Rajanagaram Mandal

Drilling of bore well by combination Rotary Rig to a finished Diameter of 350 mm justify both sides. Which may be carried out by pilot bore of sutable Diametre and then reaming to the required Diameter in all formations suitable for Rotary drilling such as alluvial soils, sand stone formation etc., including insertion of 175mm Dia PVC blue casing pipe upto the depth as directed by the department including gravel packing, firing of bailplug,clampset bore development.conducting yield test,crew charges and transportation charges of Rig etc. and other supporting vehicles and all other charges required in the firation of pipes assembly complete including all labour charges etc. any where in E.G.Dist but exclude the cost of metarials. The bore should be developed with compressed air till clear water free from sand and other materials is contionously discharged. The gravel packing should have minimum annualar thickness of 70mm. The gravel should be throughly washed before packing The gravel packing should be in such a way that the theoritical quantity is consumed completely The pipe assembly should be securely clamped. The entire work should be executed confirming to IS 2800 part 1 &11/1979. (But excluding the cost of casing) including Contractor's profit 13.615%

Cost and supply of 175mm PVC Blue casing pipes for casing including all labour charges for 2 conveyance to work site including Contractor's profit of 13.615%

Labourcharges for slotting of 175mm dia Blue threaded casing pipe including Contractor's profit of 13.615%.

Cost and supply of 175mm MS clampset etc., and complete

Cost and supply of 175 mm dia PVC Bore cover etc., and complete

Cost and supply of 175 mm dia M.S Bail Plug etc., and complete

Provision for Geological Survey charges including Contractor's profit of 13.615%

Supply and Transportation of 15.00 HP 8-12 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I. Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi The rate including Contractor's profit 13.615%

Fabrication transportationand and supply of wall mounted sordrol panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cobre entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all Internal wiring using LAT/Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 2phase motor pump sets. As per list of recommended brands Voltmeter 0-500 90x96mm size 0 to 20 Amps/050 Amps(Voltmeter Makes L&T/C&S/SALZAR/HPLJAEI/Meco/Rishab) Ammeter (96x96mm size) No Ammeter Makes L&T/C&S/SALZAR/HPL/ΑΕΙ Meco/Rishab) Single phase preventor of suitable range-12s (Single phase preventor Makes: L&T/Miniloc/Powertec)32 A TP, 10KA MCB (32 А ТР. 10KA MCB. Makes Legrand/Schneider) Indication lamps (R-Y-B) with switch control-1 set Voltmeter & Ammeter selector switch-2 Nos Supply and fixing of ISI Mark suitable capacitor 220 capacitor Makes L&T/Siemens/Schneider/ Epcos/Havells) b) above 7.5 HP to 12.5 HP with Star Delta Starter (Make C&S/Crompton/L&T/SIEMENS/BCH) 7.5 HP to 12.5 HP with Star-Delta Starter

Supply of 3 Core 4.0 sqmm Flat Copper cable Stor Submersible Motors confirming to1990 Makes As per list of mended brands as category-1 makes Finoles/RR Kabel Polycab/Havells/ KEI/Gloster Goldmedal /GM/ Finecab/Milton)Contractor's profit 13.615%

Cost and Supply of 65mm dia SS Nipples etc., and complete

Cost and Supply of 65mm dia MS Clamp Set etc., and complete

Manufacture, Supply. & Delivery of HDPE Pipes conforming to 15 4984-1995 including transportation to anywhere in A.P, excluding all taxes including Contractor's profit 13.615% 75 mm dia HDPE 16 kgs Pipes

Labour charges for Errection of Motor and Pumpsets including Contractor's profit 13.615%