Annual contract at unit rate for providing & fixing and repairs/ replacing the broken/ rusted/leaking water supply Pipes, valves etc. at different places in the University campus for the year 2025-26. (3rd Trial)

1 material etc. and depositing the excavated earth up to 50mtr. 1.00 CUM 208.93

lead without damaging any existing pipe lines for water,

drainage, gas, cable, etc. all complete as per the instructions.

Labour for carefully disconnecting and removing existing

G.I./PVC Pipe line from floor, wall, trench, terrace, sump, tank

etc. and making it clean to remove deposited silt and other

scaling etc. including flushing with water/ other method and

2 reconnecting the same as per required position and making and 1.00 RMT 90.00

repairing hole/groove etc. and testing, using one's own G.I.

hook, clamp saddle, jute, white zink, hold tight, solution and

deficite/ broken G.I. fitting of ISI mark and approved quality

etc. complete for all heights as per instructions. For 15mm dia

3 Do…..do……..but for 20mm dia ….do….do… 1.00 RMT 102.00

4 Do…..do……..but for 25mm dia ….do….do… 1.00 RMT 122.40

5 Do……do…but for 40mm dia pipe…do….. 1.00 RMT 142.80

6 Do……do…….but for 50mm dia pipe…do….. 1.00 RMT 163.20

7 Do……do…….but for 75mm dia pipe…do….. 1.00 RMT 195.36

8 Do……do…but for 100mm dia pipe…do… 1.00 RMT 207.24

Making new G.I./PVC Tee-Connection from the existing

G.I./PVC pipe line for required diameter for water tank, sump,

tank, pit, etc. including providing and fixing necessary G.I.

fitting of ISI mark and approved quality i.e. tee, nipple of

different length coupline, plug, elbow, reducer (tee-elbow-

9 reducer etc.) using one's own G.I. Clamps, saddle, khila, jute, 1.00 JOB 362.40

white zink, hold tight solution/ solution, making and repairing

hole in wall/ floor/ R.C.C. work/ tank/ sump/ trench etc.

including stopping water cutting the pipe threading and refixing

the same in existing, position and cleaning the site etc.

complete for all heights as per instructions. For 15mm dia Pipe

10 Do……do…….but for 25mm dia pipe….do… 1.00 JOB 493.20

11 Do……do….but for 40mm dia Pipe ….do… 1.00 JOB 752.40

12 Do……do……but for 50mm to 80 mm dia Pipe ….do… 1.00 JOB 832.80

Making new G.I./C.I. Tee-Connection/ making arrangement for

cutting of existing line for connection from the existing G.I./C.I.

pipe line for required diameter for water tank, sump, tank, pit,

etc. including making and repairing hole in wall/ floor/ R.C.C.

work/ tank/ sump/ trench etc. including stopping water cutting

the pipe and refixing the same in existing, position and cleaning

the site and testing of work etc. complete for all heights as per

instructions. For 4" inch dia Pipe

Item Description Qty. Unit Rate Amount

Providing & fixing/replacing existing broken/ damaged ball

cock by providing and fixing full bore gun-metal ball cock

ABB/Mehra/Hindon make using jute/ white zink etc. for over

14 head tank/ sump/ water cooler tank including testing for water 1.00 Each 861.60

discharge and returning the old broken ball cock to C.D. store if

available etc. complete for all heights as per instructions. For

15 Do……do………but for 25mm dia …do…… 1.00 Each 1584.00

16 Do……do…but for 40mm inch dia ..do…do… 1.00 Each 2865.60

17 Do…..do… but for 50mm dia ...do…do… 1.00 Each 3878.40

Labour for repairing the existing broken disturbed G.M. ball

cock including removing from its original position , celaning the

entire ball cock set and fixing the deficite spares, removing and

18 refixing the polythelene ball of existing size of approved quality 1.00 Each 352.80

if necessary for over-head tank/ sump/ water cooler tank

including testing the water discharge and distribution pipe line

etc. complete for all heights as per instructions. For 15mm dia

19 Do……do………but for 25mm dia …do…… 1.00 Each 420.00

20 Do……do…..but for 40mm dia …..do….. 1.00 Each 417.12

21 Do…..do…..but for 50mm dia …..do…..do… 1.00 Each 462.00

Providing and fixing in position G.I. bend of 90 degree of the

ISI mark, approved quality, for different position pipe lines long

or short as per requirement and making and repairing groove in

22 wall/ trench/ R.C.C. and for 75mm dia nut, bolt set and rubber 1.00 Each 1384.80

pakcing and flange/ coupline of approved quality as per

requirement, etc. complete for all heights as per instructions.

For 75mm dia bend

23 Do…….do……..but for 100mm dia ….do…. 1.00 Each 2407.20

Replacing existing broken/ leaking cast iron wheel/ball valve

by Providing and fixing new cast iron ball valve KARTAR

make IS 9890 including making and repairing hole/ groove in

wall/ trench/ floor/ sump testing and returning the released

material to the C.D. store if available etc. complete for all

heights as per instructions. For 15mm dia valve.

25 Do……do……..but for 20mm dia ….do…… 1.00 Each 939.60

26 Do……do……..but for 25mm dia …….do… 1.00 Each 1065.60

27 Do……do……but for 40mm dia ….do…. 1.00 Each 1534.80

28 Do……do……..but for 50mm dia …….do… 1.00 Each 2133.60

29 Do……do……..but for 80mm dia …….do… 1.00 Each 7170.00

Providing and fixing white plastic paper in tube from by

applying wet-coal tar of approved quality to the G.I. Pipe line of

different dia including wrapping the paper alround the pipe to

have an even finihsing before laying pipe in trench/ wall etc.

complete for all heights/ depth, asper instrucitons. For 15mm

31 Do……do…… but 20mm dia …..do….do…. 1.00 RMT 30.00

32 Do……do….. but 25mm dia ……do….do….. 1.00 RMT 44.40

33 Do…..do….. but 40mm dia ….do…do… 1.00 RMT 62.40

34 Do…..do….. but 50mm dia ….do…do… 1.00 RMT 72.00

35 Do…..do….. but 75mm dia ….do…do… 1.00 RMT 108.00

36 Do…..do….. but 100mm dia ….do…do… 1.00 RMT 144.00

Item Description Qty. Unit Rate Amount

Labour for repairing the existing broken/ leaking/ wheel valve/

foot valve/Non return valve including removing from it's

original position. Cleaning the entire parts and fixing the

deficite spares/parts, removing and refixing the polythelene

washer of approved qualtiy if necessary including testing etc.

complete for all heights/depth as per instructions. For 15mm

38 Do…….do…….but for 20mm dia .….do…… 1.00 Each 157.08

39 Do…….do…….but for 25mm dia .….do…… 1.00 Each 201.96

40 Do…….do…….but for 40mm dia .…do… 1.00 Each 349.80

41 Do…….do…….but for 50mm dia .….do… 1.00 Each 394.68

42 Do…….do…….but for 80mm dia .….do… 1.00 Each 644.16

Do…..do…… but C.I. Foot valve of 100mm dia in trench, pit,

43 sump etc. …do....do…using one's own nut bolts, washer and 1.00 Each 777.60

ruubber packing/ gasket etc. …do…do…..

Providing and fixing in position G.I. Pipe 'B' class IS:1239 of

Swastik/ Surya Prakash/ Asian/ Jindal make of requried length

'with all necessary G.I. fittings of ISI mark and using jute, hold

tight, white zink and required solution etc. of approved quality,

carefully joining the same with existing connection making and

repairing hole/ groove etc. for any depth testing the line etc.

complete as per instructions. For 15mm dia. pipe laying in

floor, pit, trench, road etc.

Providing and fixing in position G.I. Pipe 'B' class IS:1239 of

Swastik/ Surya Prakash/ Asian/ Jindal make.. do…..do…….but

for 20mm dia …..do…… For 20 mm dia. pipe laying in floor,

pit, trench, road etc.

Providing and fixing in position G.I. Pipe 'B' class IS:1239 of

Swastik/ Surya Prakash/ Asian/ Jindal make.. do…..do…….but

for 20mm dia …..do…… For 25 mm dia. pipe laying in floor,

pit, trench, road etc.

Providing and fixing in position G.I. Pipe 'B' class IS:1239 of

Swastik/ Surya Prakash/ Asian/ Jindal make.. do…..do…….but

for 20mm dia …..do…… For 40 mm dia. pipe laying in floor,

pit, trench, road etc.

Providing and fixing in position G.I. Pipe 'B' class IS:1239 of

Swastik/ Surya Prakash/ Asian/ Jindal make.. do…..do…….but

for 20mm dia …..do…… For 50 mm dia. pipe laying in floor,

pit, trench, road etc.

Providing and fixing in position G.I. Pipe 'B' class IS:1239 of

Swastik/ Surya Prakash/ Asian/ Jindal make.. do…..do…….but

for 20mm dia …..do…… For 75 mm dia. pipe laying in floor,

pit, trench, road etc.

Providing and fixing in position G.I. Pipe 'B' class IS:1239 of

Swastik/ Surya Prakash/ Asian/ Jindal make.. do…..do…….but

for 20mm dia …..do…… For 100 mm dia. pipe laying in

floor, pit, trench, road etc.

Providing and fixing cast iron cast iron ball valve TESTED

KARTAR or equivalent make IS 9890 including making and

51 repairing hole/groove in wall trench/floor sump testing etc. 1.00 Each 582.00

complete for all heights as per instructions. For 15mm dia

52 Do…….do……but for 20mm dia ….do…... 1.00 Each 825.60

53 Do…….do…..but for 25mm dia ….do…..do… 1.00 Each 932.40

54 Do……do……but for 40mm dia ….do….. 1.00 Each 1352.40

Item Description Qty. Unit Rate Amount

55 Do……do…….. but for 50mm dia ….do…… 1.00 Each 1922.40

56 Do……do…….. but for 80mm dia ….do…… 1.00 Each 6411.60

Labour for dismentalling existing R.C.C./ Bitumenous road/

brick wall/ RCC slab with cutting bars etc. on terrace/ ground/

floor of requried size and length without damaging existing

under ground or consealed services such as water supply, gas

57 supply, drainage line, cable netwrok work etc. and throwing 1.00 RMT 799.20

rubbish as and where directed including repairing the same after

completion of work with cement concrete (1:2:4) and testing of

the work using one's own tools, labours and materials etc.

complete as per instructions.

Replacing/providing and fixing casted check nut complete set of

approved quality using one's own rubber packing jute, hold tight

58 etc. including making and repairing hole in PVC tank etc. as per 1.00 Each 186.12

site condition complete at all height and as per instructions. For

59 Do……..do………but 25mm dia …..do…… 1.00 Each 246.84

60 Do……..do………but 40mm dia …..do…… 1.00 Each 330.00

61 Do……..do………but 50mm dia .....do……. 1.00 Each 431.64

Labour for repairing existing leakage/ damaged C.I. Sluice

valve including opening and reassemble the same after repairs

of all parts of valve including welding, machining if necessary

62 and bringing the welding machine at site using, one's own 1.00 Each 819.72

welding rod, nuts, bolts, rubber packing as per required with

testingetc. at all heights/under ground etc. complete and as per

instruction including dewatering pit/ trench. For 3" dia.

63 Do………do……..but for 4" dia dia …do… 1.00 Each 933.24

64 Do………do……..but for 6" dia ….do… 1.00 Each 1046.76

65 Do………do……..but for 8" dia ….do… 1.00 Each 1214.40

Removing/providing and fixing S.S. spindle for C.I. sluice valve

with G.M. fish nut including making spindle and fish nut as per

66 existing making and required to match existing C.I. Sluice valve 1.00 SET 3036.00

using one's own rubber packing, nut bolts, grease, etc. complete

as per instructions. For 3 inch dia

67 Do…….do……..but for 4 inch dia …..do… 1.00 SET 3171.96

68 Do…….do……..but for 6 inch dia …..do… 1.00 SET 3376.56

69 Do…….do……..but for 8 inch dia …..do…… 1.00 SET 3828.00

Arrangement of newly C.I. Joint/ Labour for leanking C.I. joint

removing existing lead including fixing jute ring and filling pig

lead and hammering same process three times after testing

where requierd using one's own lead, fire wood, fire bucket,

caulking tool etc. as per instructions. Work has to be executed

at all heights/depth for water supply line of 2 inch dia.

71 Do…….do……but for 3 inch dia ……do…… 1.00 Each 1068.00

72 Do…..do….…but for 4 inch dia ……do…… 1.00 Each 1502.40

73 Do…….do……but for 6 inch dia …do…… 1.00 Each 2035.20

74 Do….do……but for 8 inch dia ……do…….. 1.00 Each 2528.40

Labour for removing existing leakage/rusted damaged C.I. Pipe

line and refixing the same after repairs of C.I. Pipe for

underground/ vertically C.I. pipeline, using one's own tools &

tackles, scaffolding, chain pully block, labours, jute, nut-bolts,

packing etc. complete and as per instruction. For 2/3 inch dia

76 Do………do……..but for 4 inch dia ….do…… 1.00 RMT 276.00

Item Description Qty. Unit Rate Amount

77 Do……..do……..but for 6 inch dia ….do…… 1.00 RMT 344.40

78 Do……..do……..but for 8 inch dia ….do…… 1.00 RMT 414.00

Providing and fixing 3 layer PVC White tank with threded

cover at top of PLASTO RUF-TUF /OXYGEN ECO or

equivalent ISI make having 10 years guarranty , approved

79 quality as per required capacity, shape and design etc. including 1.00 Each 4725.00

making and repairing hole, groove, lifting, carting, and testing

with water etc. complete for all heights as per instructions of

Engineer Incharge. (A) 500 LITRES

80 Do..do...(B) 1000 LITRES 1.00 Each 9450.00

81 Do…do..(C) 1500 LITRES 1.00 Each 14175.00

82 Do…do...(D) 2000 LITRES 1.00 Each 18900.00

83 Do…do...(E) 5000 LITRES 1.00 Each 47250.00

Replacing/Providing and fixing gland, C.I. Nut for C.I. sluice

valves using rubber packing, nuts, bolts,gland packing etc. as

per requirement on site etc. complete and as per instructions.

85 Do…..do……but for 4 inch dia …do….do…. 1.00 Each 620.40

86 Do……..do…….but for 6 inch dia …..do… 1.00 Each 1034.40

87 Do……do…….but for 8 inch dia …do…… 1.00 Each 1248.00

Providing and fixing C.I. Cap/plug with G.I. coupline using

one's jute/ hold tight etc. complete for under ground/ all heights

of pipe lines etc. complete as per the instructions. For 15mm dia

89 Do……..do……..but 20mm dia …..do….. 1.00 Each 111.60

90 Do…….do…… but 25mm dia …do…..do… 1.00 Each 193.20

91 Do…do…but 40mm dia ….do…..do…. 1.00 Each 248.40

92 Do……do……but 50mm dia …..do…..do….. 1.00 Each 313.20

93 Do……do……but 75mm dia …..do…..do….. 1.00 Each 446.40

94 Do……do……but 100mm dia …..do…..do….. 1.00 Each 618.00

Providing & fixing/replacing G.I Union of I.S.I mark approved

quality for G.I. pipe lines one's own jute hold tight rubber ring

etc. complete for all height/ depth as per instructions for 15mm

96 Do……..do……..but 20mm dia …..do….. 1.00 Each 279.60

97 Do…….do…… but 25mm dia …do…..do… 1.00 Each 381.60

98 Do……do……but 40mm dia ….do…..do…. 1.00 Each 598.80

99 Do……do……but 50mm dia …..do…..do….. 1.00 Each 728.40

100 Do……do……but 75mm dia …..do…..do….. 1.00 Each 1030.80

101 Do……do……but 100mm dia …..do…..do….. 1.00 Each 1357.20

Providing and fixing CI/ M.S./ G.I. coller for leaking cast iron/

102 G.I. pipeline and laying in trench/all height etc. all complete as 1.00 Each 300.00

per insturuction. 50mm dia

103 Do …….do……..but for 75mm dia 1.00 Each 356.40

104 Do …….do……..but for 100mm dia 1.00 Each 428.40

105 Do …….do……..but for 150mm dia 1.00 Each 799.20

106 Do …….do……..but for 200mm dia 1.00 Each 1356.00

Providing and fixing 25mm non return valve of IS:778 Class-I

'LEADER' make including making and repairing groove in

wall/trench/floor, testing etc. complete for all heights/depth as

per instructions. For 1inch dia valve.

Item Description Qty. Unit Rate Amount

Providing and fixing / replacing 100mm dia. cast iron Non-

Return (Reflux) valve Kartar IS: 5312 make incuding making

108 and repairing groove in wall trench/floor testing and returning 1.00 Each 10501.20

the release materials to the C.D. store etc. complete for all

heights as per instructions.

Labour for repairing job temporary repairs to leakage existing

G.I. Pipe line/ C.I./ R.C.C. pipe line at different location trench,

terrace floor, under ground, pumping station etc. palces by

inspecting the site and fixing rubber tube G.I. plug/ wooden

plug etc. to stop the water etc. & as per instruction for 15 to

100mm dia pipe lines.

Labour for carefully removing the existing G.I./ C.I./ R.C.C./

PVC pipe of any dia including allied fittings etc. and depositing

the same in C.D. store with all laboures, tools, carting lifting

scaffolding etc. complete as per instruction OR Labour for

collecting and carting the above pipes from C.D. store to new

site ....do....do.... for 15 to 50mm dia pipe lines.

Labour for carefully removing the existing G.I./ C.I./ R.C.C./

PVC pipe of any dia including allied fittings etc. and depositing

the same in C.D. store with all laboures, tools, carting lifting

scaffolding etc. complete as per instruction OR Labour for

collecting and carting the above pipes from C.D. store to new

site ....do....do.... for 75 to 200mm dia pipe lines.

Providing and fixing/ replacing cast iron sluice valve 'Kartar'

make IS: 14846 including rubber packing nut-bolts, washer of

approve quality for vertical/ under ground pipe line of pipe lines

112 of different dia including making and repairing hole/ groove in 1.00 Each 5688.00

wlall/ trench/ floor and testing and returning the released

materials to C.d. store etc. complete as per instructions for

113 Do….. do… but 100mm dia …..do….do…. 1.00 Each 9364.80

114 Do….do….. but 150mm dia …..do….do…. 1.00 Each 14133.60

115 Do…..do…..but 200mm dia ….do….do…. 1.00 Each 24349.20

Replacing/providing and fixing PVC cover/ lid for different

types of PVC water storage tank i.e. threded/ openable type and

116 loacking arrangement including using one's own nut-bolts and 1.00 Each 840.00

other accessories as per site conditions etc. complete for all

heights as per instructions.

Replacing/ providing and fixing 100mm dia centrifuggaly C.I. S

& S pipe "LA" IS: 1536/2001 using one's own ring, jute etc. as

per requirement including laying vertical/ horizontal/ trench

etc. complete as per instructions (without fittings).

Replacing/ providing and fixing 100mm dia C.I. D/F pipe IS:

1536/1537/7181 using one's own nut bolts, rubber packing/

gasket set etc. as per requirement laying vertical/ horizontal/

trench etc. complete as per instructions (without fittings).

Labour for repairs to existing PVC water storage tank of any

design/size/ capacity at any height including disconnecting all

119 pipe line connecting and repairing the same tank with electric 1.00 Each 1858.80

heater and PVC rod of approved make then re-connecting all

pipe line connections and testing the same as per instructions.

Item Description Qty. Unit Rate Amount

Providing and laying brick masonary in C.M. (1:4) using

approved quality bricks for construction support structure up to

450mm height for water supply pipe liens of different dia

120 including covering the entire pipe and making and repairing 1.00 Each 268.80

hole/ groove as per site conditions and finish the masonary with

smooth finish in C.M. (1:4) with vata alround and watering etc.

complete for all heights/ depth as per instruction

Filling excavated earth in trench/pit and levelling the site of

121 work including of required watering work etc. complete as per 1.00 CUM 133.65

Tanker of 5000ltr. charges for booking water supply and

passing into over head tank/ sump at any 2 to 3places in the

campus for emergency/ essential services (tanker must be with

adequate pump facility).

Replacing existing rusted/ leaking pipe line by providing and

fixing to wall , ceiling and floor G.I. 'B' class medium IS:

Swastik/ Asian/ Jindal/ Surya Prakash make in required length

with all necessary G.I. fittings of ISI mark and using jute, hold

tight, white zink and other method of approved quality

including carefully disconencting existing broken/ rusted line

and making it good by new pipe for wall, ceiling, floor, at all

heights etc. including de-watering and cleaning the site and

returning the release material to C.D. store if are available

using one's own G.I. clamps saddles, khila and making repairing

holes/ groove in wall/ floor/ tank/ sump etc. as per instructions

for 15mm dia pipe .

124 Do……do……but 20mm dia …..do…..do….. 1.00 RMT 339.00

125 Do……do……but 25mm dia …..do…..do….. 1.00 RMT 445.95

126 Do……do……but 40.00mm dia …..do…..do….. 1.00 RMT 667.57

127 Do……do……but 50.00mm dia …..do…..do….. 1.00 RMT 873.18

128 Do……do……but 80.00mm dia …..do…..do….. 1.00 RMT 1136.18

129 Do……do……but 100.00mm dia …..do…..do….. 1.00 RMT 1207.18

Providing and fixing to wall , ceiling and floor G.I. 'B' class

medium IS: 1239 Swastik/ Asian/ Jindal/ Surya Prakash make

in required length with all necessary G.I. fittings of ISI mark

and using jute, hold tight, white zink and other method of

approved quality including carefully disconencting existing

130 broken/ rusted line and making it good by new pipe for wall, 1.00 RMT 251.10

ceiling and floor at all heights etc. including de-watering and

cleaning the site and returning the release material to C.D. store

if are available using one's own G.I. clamps saddles, khila and

making repairing holes/ groove in wall/ floor/ tank/ sump etc. as

per instructions for 15mm dia pipe .

131 Do…do…but 20.00mm dia ….do….do…. 1.00 RMT 304.00

132 Do…do…but 25.00mm dia …..do….do…. 1.00 RMT 401.95

133 Do……do……but 32.00mm dia …..do…..do….. 1.00 RMT 500.97

134 Do……do……but 40.00mm dia …..do…..do….. 1.00 RMT 608.35

135 Do……do……but 50.00mm dia …..do…..do….. 1.00 RMT 794.18

136 Do……do……but 80.00mm dia …..do…..do….. 1.00 RMT 1022.69

137 Do……do……but 100.00mm dia …..do…..do….. 1.00 RMT 1076.32

Item Description Qty. Unit Rate Amount

Providing and supplying D.I. K-9 grade Ductile Iron Pipe for

following nominal bore diameter with internal cement mortar

lining including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, slacking etc, complete. (IS

8329-2000). Lowering, laying and jointing C. |. S & S Spun

pipes suitable for Tyton joints / Mortar lined D.I. Pipes of

various classes with Cl / MS specials of following diameters in

proper position, grade and alignment as directed by Engineer-in-

charge including hydraulic testing etc. comp. For 80mm dia

139 Do……do……but 100.00mm dia …..do…..do….. 1.00 RMT 1406.58

140 Do……do……but 150.00mm dia …..do…..do….. 1.00 RMT 2059.89

141 Do……do……but 200.00mm dia …..do…..do….. 1.00 RMT 2782.22

Providing and supplying in standard length ISI mark high

density Polyethylene H.D.P.E.- 10 kg/cm2 Pipes suitable for

potable water as per IS specification no, 4984/1995 including

all local and central taxes,transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to the dept.

142 stores etc, comp. Including Lowering, laying and jointing HDPE 1.00 RMT 159.46

pipes and specials of following class and diameter (By butt

fusion welding method) including cost of conveyance from

stores to site of works at all level including cost of labour,

material, giving satisfactory hydraulic testing etc. comp. For

143 Do……do……but 75.00mm dia …..do…..do….. 1.00 RMT 224.91

144 Do……do……but 90.00mm dia …..do…..do….. 1.00 RMT 318.92

145 Do……do……but 110.00mm dia …..do…..do….. 1.00 RMT 512.89

Providing and fixing Loft Storage Tanks With ISI Mark (with

outside White colour & inside lining) with threded cover at top

of SUPER/SINTEX or equivalent ISI make, approved quality as

146 per required capacity, shape and design etc. including making 1.00 EACH 2196.98

and repairing hole, groove, lifting, carting, and testing with

water etc. complete for all heights as per instructions For

Litres Capacity

147 Do…do…For 500 Litres Capacity 1.00 EACH 5553.14

Providing and fixing Gun metal check or non-return fullway

wheel valve.(A) 15mm dia

Providing and fixing Gun metal check or non-return fullway

wheel valve.(A) 20 mm dia

Providing and fixing Gun metal check or non-return fullway

wheel valve.(A) 25 mm dia

Providing and fixing Gun metal check or non-return fullway

wheel valve.(A) 40 mm dia

N.B.:- For any use of electrical machinery/tools during above works at any site by the contractor/ worker thye must

obtain the N.O.C. from the Engineer- In -Charge prior electrical conenction for such work & arrangement for

necessary extension of point and making good after completion of job.

University Engineer

Special Terms & Conditions for ARC 2025-26

1 The estimated cost shown in the tender notice will work as rough guidelines.

2 The amount of work executed shall depend on the availability of funds.

Item Description Qty. Unit Rate Amount

3 The amount of work shown in the tender notice may increase and decrease to any extent as per the directives of

authorities of authorities, availability of funds and emergency.

4 All conditions and technical specifications (as per R & B Handbook) shall be strictly adhered to and contractor

found violating the same in spite of drawing his attention shall be immediately removed from work.

5 All the debries will have to be deposited and spreaded within the campus or outside the campus as per

instruction of engineer in charge.

6 Quantity is on unit based, quantum of works is not obligatory. The work is to be carried at any building of the

university in Vadodara, Samiala and Padra.

7 No price-escalation of any kind under any circumstances will be entertained under nay stage of work.

8 All the released material from any site of work shall have to be deposited to construction division store by the

contractor for which no extra payment will be made.

9 The contractor will have to report all working days at 10.00 am. at chamelibaug, maintenance office to collect

the work order instructions, etc.

10 On completion of work the site shall be cleared immediately.

11 Contractor shall have to depute experience engineer at the site of work or he himself shall have to remain

present throughout the period of work in progress.

12 Contractor shall not replace/add/ take away any material from the site of work without permission of engineer

13 Contractor shall have to obtain necessary labour licence, insurance, etc. as per the requirement for the said

work and submit the same before starting the work.

14 Contractor has to arrange necessary scaffolding materials, safety equipments to workers, etc. for the work to be

carried out at greater heights.

15 The contractor shall follow-up and submit the progress report of work and also submit the completion of work.

16 Incase of dispute the order of Vice-Chancellor will be final and binding to all.

17 The items other than the said tender required to be executed then these items will be executed and paid as per

approved rates of ARC’s 2025-26

18 No subletting of any kind under any circumstances will be entertained under any stage of work.

University Engineer

I/we have read above said condition will full presence of mind and assure you to abide by the same.

Signature of the Contractor